February 2021 – Page 413

Do I need a flag on my kayak?

Kayak Safety Flags and Lights Any projecting load greater than 4′ from the rear of your vehicle requires a marking. During the daytime a simple red flag or marking usually does the trick.

Can you put a flag on a Kayak?

How Do You Attach A Flag To A Kayak Or Canoe? You’ll find that many kayak flags will come with flag poles and mounting hardware, so you can attach it to your vessel straight away. However, some may require additional purchases or may require you to have gear tracks installed on your craft.

Can you drink on a kayak in Texas?

Can you get a DUI on a kayak in Texas? Yes. Texas’s BWI law prohibits anyone from operating any vessel under the influence of alcohol or drugs. However, open containers of alcohol are allowed on the vessel.

Do you have to wear a lifejacket in a kayak in NC?

N.C. Kayak Life Jacket Laws Do you need a life jacket to kayak in North Carolina? Yes. All vessels must have one Coast Guard approved personal flotation device of Type I, II or III for each person on board.

How do I attach a flag to PVC pipe?

Attach the flag to the top of the PVC flag pole. Use two 2-inch screws to attach the flag. One screw should be installed at the top and one installed at the bottom of the flag. The screws will create a tight grip between the flag and the PVC flag pole.

Can you get a DUI on a kayak in Texas?

Do you have to wear a lifejacket on a kayak in Texas?

Texas law requires that all vessels sailing in Texan waters—including canoes, kayaks and other paddlecraft—must have at least one suitable, wearable PFD for each passenger that meets USCG standards and is readily accessible.

Do you need a license to kayak in NC?

N.C. Kayaking Operator Education Laws Do you need a license to kayak in North Carolina? You do not need a license to operate a kayak or canoe in North Carolina. Kayaks and canoes with no attached motor do not require operator licensing or education.

Do you have to register a kayak with a trolling motor in NC?

Q: What vessels require registration? A: All motorized vessels used on public waters including vessels which use an electric trolling motor must be registered. This requirement also includes jet skis. All US Coast Guard Documented Vessels operating in North Carolina for over 90 consecutive days must be registered.

Is PVC strong enough for flag pole?

PVC pipe is not the most sturdy material from which to make a flagpole, but it is definitely economical.

Can you make a flag pole out of PVC pipe?

Just cut the PVC pipe to the desired height for your flagpole, then drill holes in it to attach the rope cleat. Cement your flagpole in a bucket to create the base.

What mounts can you get in Draenor?

The following mounts are associated with rare spawns found throughout Draenor….Rare Spawn Mounts (10)

Mount	Received from killing	Zone
Great Greytusk	Gorok	Frostfire Ridge
Bloodhoof Bull	Nakk the Thunderer	Nagrand
Mottled Meadowstomper	Luk’hok	Nagrand
Sunhide Gronnling	Poundfist	Gorgrond

How do you get a Talbuk mount?

There are two ways. One is to get exalted with the Mag’har (if you’re Horde) or with the Kurenai (if you’re Alliance). Then you can buy the mount for 80g or so. The other is to get enough Halaa Battle Tokens and Halaa Research Tokens.

Where can I buy a Talbuk mount?

Every Alliance Talbuk mount is sold by the Trader Naras located by the Telaar camp in the Outaland’s Nagrand zone. There are two main types of Kurenai Talbuks mounts for sale. All Talbuk mounts are available at the Exalted reputation level with the Kurenai faction.

Can Tauren ride Talbuks?

There are two exceptions though, one for each faction – Tauren may only ride Kodos, Wolves, Talbuks, and the rare mounts that drop within instances, and Mechanostriders are only rideable by gnomes and dwarves. It is worth mentioning that the Black War Raptor is also available for Tauren, but as the only one.

Where can I find Gorok?

Gorok is a boar located around Frostfire Ridge.

How do I become friendly with MAG har?

There are 3 ways to get rep with the Mag’har: Normal Questing, Repeatable Quests, and Killing certain mobs. Quests for the Mag’har begin in Hellfire Peninsula with the assassin quest from Thrallmar. This quest will lead you to a small Mag’har outpost north of Hellfire Citadel.

How do I get mag Har revered?

The Mag’har is a Horde-only Nagrand-based faction in TBC. Most of the reputation with them is obtained by killing Ogres in Nagrand, as well as by doing quests and through repeatable turn-ins.

How do I get dark war Talbuk TBC?

the dark talbuks are purely pvp, they do not require rep with any faction, the other types of talbuks do require exalted with mag’har (or alliance equivalent), you have to get 100 battle tokens (kill 100 players) and 20 research tokens (1 per 20 of the random crystal drops from npcs in nagrand).

Where can I farm Talbuk meat?

I feel like the best possible place to farm fresh meat is Mac’Aree. Hands down. Just going in a counter-clockwise circle near the middle of the map, you will see talbuks littering the sides of the crumbled roads. (Don’t be afraid to venture outside of the circle, they are pretty abundant wherever you see the pavement.)

How do you get Cobalt riding Talbuk?

Reins of the Cobalt Riding Talbuk

Reins of the Cobalt Riding Talbuk.
Binds when picked up.
Mount.
Use: Teaches you how to summon this mount.
Horde Only.
Requires Level 40.
Requires Journeyman Riding.
Requires The Mag’har – Exalted.

Where can I buy a Halaa mount?

Trader Narasu . To buy them you must be exalted with the appropriate faction.

Where is the Nagrand on the map?

Nagrand is for levels 65-68 and is located in Outland. There are entrances from Terokkar and Zangarmarsh. For both sides have an outpost/quest hub here, Garadar and Telaar, respectively. Nesingwary has also set up a camp herenear the Northeast trail to Zangarmarsh as well as the Consortium to the Northwest of Oshu’gun.

What are the new mounts in World of Warcraft recruit a friend?

Warcraft Mounts. A field guide to mounts in the World of Warcraft. Blizzard have posted a preview of their upcoming Recruit-a-Friend revamp, which includes two new explorer-themed mounts: the Explorer’s Dunetrekker (a camel) and the Explorer’s Jungle Hopper (a two-seater glider plane).

What is the warlords of Draenor Mount Guide?

The focus of this guide is provide concise information to help you quickly obtain every new mount that Warlords of Draenor brings. It is broken down into sections by source to aid you in navigation. As you browse the models of each mount you may note that different colors of similar mount models can come from different sources.

How do you get the new talbuk mounts in Shadowlands?

With the Warlords of Draenor expansion, a new, more fierce-looking talbuk model was introduced, and with it, 5 new talbuk mounts. The [Trained Silverpelt] can be obtained through the Garrison stables.

How do you heat a tinkers construct smeltery?

To use the Smeltery, you must first add some lava to the Seared Tank, Seared Window, or Seared Glass (Either manually by right-clicking with a bucket of Lava or piping it in using Buildcraft compatible pipes). This will heat up the interior of the Smeltery to allow you to process materials.

How do you make smeltery smelt faster?

If you put gasoline in your smeltery tank, it will instantly smelt everything down.

How do you fuel a smeltery?

The smeltery can be fueled by various liquids, the most common of which is lava. Simply right click on one of these blocks with a bucket of lava to fill them. Each block can store 4 buckets of liquid, but you can include multiple copies of these blocks in your smeltery.

How do you make a smelter in Minecraft?

Add Items to make a Blast Furnace In the crafting menu, you should see a crafting area that is made up of a 3×3 crafting grid. To make a blast furnace, place 5 iron ingot, 1 furnace and 3 smooth stone in the 3×3 crafting grid.

Is smeltery a real word?

noun, plural smelt·er·ies.

Is Smeltery a real word?

Why is my blast furnace not working Minecraft?

Make Sure You’re Putting Enough Coal The top slot represents the ore, tool, or armor that you need to smelt. The bottom slot requires you to put fuel inside the blast furnace. In order for the blast furnace to work properly, you need to put inside coal as fuel. Using anything else might not work.

How do you get lava in a smeltery?

Take a bucket of lava and right click the smeltery drain block. (Assuming you’re using a big black smeltery like in SF3.) This will pour lava into the main part of the smeltery. Then you can pour it from the faucets into a casting basin that’s filled with the redstone amber.

Is smelting bad for the environment?

Smelting, the process of extracting metals from ore, played an important (and lucrative) role in US manufacturing. The process releases impurities such as lead and arsenic, which can be released through smokestacks and contaminate surrounding environments.

What do you call someone who smelts?

Definition of smelter : one that smelts: a : a worker who smelts ore. b : an owner or operator of a smeltery. c or smeltery \ ˈsmel-t(ə-)rē \ : an establishment for smelting.

How do you use the smeltery controller in Minecraft?

To complete the Smeltery, replace two of the wall blocks with a Seared Tank and a Smeltery Controller . The Smeltery Controller should begin glowing, indicating successful Smeltery construction. Right-clicking the Smeltery Controller will allow you to access the Smeltery GUI.

How do I complete a smeltery?

What is smelting in Minecraft?

Smelting, also known as cooking, baking, burning, or producing, is the main method to “smelt”. It is an action using a furnace, blast furnace or smoker where a player converts ore or another block into something else by heating it with fuel.

Is there a way to speed up smelting?

No, you cannot speed it up. However, you can process more at the time by increasing the size of your smeltery, which is handy when you start automating it. If you put gasoline in your smeltery tank, it will instantly smelt everything down. For the real, there are. At least on 1.12.2, I don’t know about another versions, but you can use Pyrotheum.

Is Civ 6 free forever?

The company has announced that it is providing everyone with a free copy of the Civilization VI game, which is theirs to keep forever.

How many GB is Civilization 6?

Storage: 12 GB available space. Sound Card: DirectX Compatible Sound Device.

Is Civ 6 DRM free?

5 and 6 are Steamworks games and do not exist in DRM-free form.

Will there be a civilization 7?

Is Civilization 7 Confirmed? Alas, at the time of writing, it’s a no. That said, developer Firaxis is expected to reveal some new games in 2021.

Is Surviving Mars DRM free?

Why buy on GOG.COM? DRM FREE. No activation or online connection required to play.

Is Steam DRM free?

Steam also has much more in the way of brand recognition, so many gamers use the platform because it is the one they are most aware of. However, because Steam does not have DRM-free games, you may want to use it in tandem with a service like GOG.com.

Does Civilization 6 still have spyware?

Unfortunately it is true. Civ VI currently installs a spyware known as Redshell with the game. Firaxis/2K hasn’t made any announcements of removing it despite being hammered with 1500+ negative reviews in the past month. How do you build a strong military in Civ 6?

Is there a way to win Civilization 6?

The easiest way to achieve Civ 6 culture victory is by choosing Qin Shi Huang of China as your leader. His civilisation is largely defensive and passive when it comes to warfare. Not to mention you get access to the Great Wall of China to further bolster your defenses. But the wall isn’t there just to stop those pesky Huns from getting to you.

How to make a civilization in Civ 6?

Insulae (Classical Era):+1 Housing in cities with 2 or more districts.

Civil Prestige (Medieval Era): Established Governors with at least 2 Promotions provide+2 Housing.

Medina Quarter (Medieval Era):+2 Housing in cities with 3 or more Districts.

New Deal (Modern Era):+4 Housing in cities with 3 or more districts.

Can I run Civilization 6?

The Civilization 6 system requirements state that you will need at least 12 GB of free disk space available to install the game. An Intel Core i3-3120M CPU is required at a minimum to run Sid Meier’s Civilization VI. However, the recommended CPU is an Intel Core i5-4200M or equivalent. Civilization VI system requirements state that you will need at least 4 GB of RAM.

How can you fake walking on water?

For anyone playing along at home, the recipe is essentially 1 part water + 1.5 parts cornstarch.

Where did Dynamo walk on water?

the River Thames
These pictures show magician Dynamo apparently walking on water across the River Thames – and his spokesman claims they are completely genuine. The 28-year-old Briton apparently took a stroll towards the Houses of Parliament on Saturday night.

Can a man walk on water?

There’s a simple reason you can’t walk on water: Humans are so big that the force of gravity overcomes the so-called surface tension of water, making us sink.

Has any man ever walked on water?

Technically speaking, walking over pure water isn’t possible. The only way it can be done is by converting it to a high density fluid or one with high viscosity. Also, if you think you can run at 108 km/hr (30 m/s), then you’ll have the ability to run across water.

How do you walk on water?

Start off walking in shallow water, around waist height. Lengthen your spine and walk by putting pressure on your heel first and then your toes, instead of walking on your tiptoes. Keep your arms at your side, in the water, and move them as you walk.

Did Dynamo walk on the River Thames?

Biblical epic: Magician Dynamo poses while standing in the middle of the River Thames where he performed an illusion in which he appeared to walk on water Tread carefully: Left, stunned onlookers watch from Westminster Bridge as Dynamo gets his feet wet and, right, he heads towards the Houses of Parliament

What magician can walk on water?

The magician who can walk on water: Dynamo crosses the River Thames on foot – without using a bridge. He may be a relatively unknown illusionist, but you could hardly describe Dynamo as being wet behind the ears.

Is Dynamo really wet behind the ears?

He may be a relatively unknown illusionist, but you could hardly describe Dynamo as being wet behind the ears. And the magician, whose real name is Steve Frayne, certainly proved this was the case as he ‘walked’ across the River Thames.

What is tunnel diode PDF?

A Tunnel Diode is a heavily doped p-n junction diode. The tunnel diode shows negative resistance. When voltage value increases, current flow decreases. Tunnel diode works based on Tunnel Effect.

What is tunnel diode explain?

A tunnel diode or Esaki diode is a type of semiconductor diode that has effectively “negative resistance” due to the quantum mechanical effect called tunneling.

What is the principle of operation in tunnel diode?

The operation of this diode mainly depends on the principle of quantum mechanics is called Tunneling. In electronics, tunneling is nothing but a direct electrons flow across the depletion region from one band to another like n-side conduction to the p-side valence.

How is the tunnel diode constructed?

Construction of Tunnel Diode The device is constructed by using the two terminals namely anode and cathode. The p-type semiconductor acts as an anode, and the n-type semiconductor material acts as a cathode. The gallium arsenide, germanium and gallium antimonide are used for manufacturing the tunnel diode.

Why is it called tunnel diode?

The name “tunnel diode” is due to the quantum mechanical tunneling is responsible for the phenomenon that occurs within the diode. The doping is very high so at absolute zero temperature the Fermi levels lies within the bias of the semiconductors.

What is the key characteristics of tunnel diode?

Tunnel diode theory basics The key to understanding tunnel diode theory is the characteristic curve in which there is a negative slope – this indicates an area of negative resistance. An area of negative resistance means that if the voltage is increased, the current actually falls – the opposite to Ohms Law.

What is the key characteristic of tunnel diode?

Which type of semiconductor is used in tunnel diode?

A Tunnel Diode is also known as Eskari diode and it is a highly doped semiconductor that is capable of very fast operation. Leo Esaki invented the Tunnel diode in August 1957. The Germanium material is basically used to make tunnel diodes. They can also be made from gallium arsenide and silicon materials.

Which semiconductor is used in tunnel diode?

In tunnel diode, n-type semiconductor emits or produces electrons so it is referred to as the cathode. On the other hand, p-type semiconductor attracts electrons emitted from the n-type semiconductor so p-type semiconductor is referred to as the anode.

What is the other name of tunnel diode?

Esaki diode
A tunnel diode (also known as a Esaki diode) is a type of semiconductor diode that has effectively “negative resistance” due to the quantum mechanical effect called tunneling. Tunnel diodes have a heavily doped pn junction that is about 10 nm wide.

What is the theory of tunnel diode?

1. Theory. The Japanese physicist Leo Esaki invented the tunnel diode in 1958. It consists of a p-n junction with highly doped regions. Because of the thinness of the junction, the electrons can pass through the potential barrier of the dam layer at a suitable polarization, reaching the energy states on the other sides of the junction.

What is tunnel-diode efficiency?

Transistor and tunnel-diode efficiency as a function of supply voltage. The circuit cillator. If the (for germanium lation having a shown in Fig. 88 is basically a relaxation os- tunnel diode is biased in the negative region diodes approximately 0.11 to 0.33 volts), oscil- trapezoidal waveform such as that shown in

What are the advantages of combination of transistors and tunnel diodes?

The combination of transistors and tunnel diodes in hybrid circuits offers many advantages. For example, the combination of these two devices in switching circuits offers the possibility of speeds many times faster than those of circuits using transis- tors only.

What are high-current tunnel diodes?

High-current tunnel diodes are basically the same as con- ventional tunnel diodes in theory and construction. However, because of the high current involved, these diodes require a relatively large junction area.

How did Victorian ladies keep their hair up?

Rats (or ratts) were used to increase volume. They were usually made from the loose hair collected from a woman’s comb, which would be stuffed into a hair receiver — a small box or dish kept on the vanity table.

What were Victorian hairstyles called?

Ringlet-like ‘barley curls’ (you might also see them called hanging curls or drop curls) were super on-trend for the time, allowing women to play with and change the texture of their hair in new ways.

How did they curl hair in Victorian era?

Made of two hinged pieces of iron, with narrow cylindrical blades at the end. The tongs would have been heated over a flame and then sections of hair were curled around them.

Did Victorians bathe?

During the weeks between baths, the Victorian lady would wash off with a sponge soaked in cool water and vinegar. Sitz baths, in which a woman sat down in a shallow dish of water, were also common.

How did women style their hair in the Victorian era?

The women, during the Victorian era liked their hair to be healthy, glossy, soft and smooth. This enabled them to style it as well as keep it simple and uncomplicated. The hair styles symbolised elegance and dignity. The women oiled their hair to smoothen it and added big curls or tiny ringlets.

How do I style my hair like a Victorian Princess?

Twist your hair back and simply pin it into place. This look is fit for a Victorian princess, not to mention show off your beautiful highlights! Twist two front pieces back into a low crown and secure it in place with a clear hair tie that seamlessly blends into your hair.

How do you style a modern Victorian style?

This modern version of a Victorian style requires a little bit of shine and minimal styling. Run Suave Professionals Avocado+Olive Oil Smoothing Leave-In Conditioning Cream throughout hair and pull it back into a low bun. Tug a few pieces lose in the front for extra visual interest.

How did they style their hair in the Middle Ages?

This enabled them to style it as well as keep it simple and uncomplicated. The hair styles symbolised elegance and dignity. The women oiled their hair to smoothen it and added big curls or tiny ringlets. Fringes were not uncommon; however, these were also not very flashy. They were simply cut and styled.

How do I install Microsoft keyboard?

On your Windows 10 PC, select Connect if a notification appears for your keyboard, then wait for it to get set up. Don’t see the notification? Select the Start button, then select Settings > Devices > Bluetooth & other devices > Add Bluetooth or other device > Bluetooth > Microsoft Bluetooth Keyboard > Done.

Is the Apple keyboard ergonomic?

The Apple Magic Keyboard has one of the best designs of any ergonomic keyboard on the market. With backlit keys, an integrated trackpad, and an attractive floating design, it has both personality and functionality. The device pairs automatically with your Mac products.

How do I activate F keys on Microsoft keyboard?

To enable FN Lock on the All in One Media Keyboard, press the FN key, and the Caps Lock key at the same time. To disable FN Lock, press the FN key, and the Caps Lock key at the same time again.

What is an Ergonomic Keyboard 4000?

Natural Ergonomic Keyboard 4000 has been expertly crafted to allow you to work in a more natural position. The new Gull Wing design features a 14-degree gable, a natural arc and a curved key bed-bringing the keys closer to your fingers to reduce reach and unnecessary motion, while encouraging a more natural typing position.

What is Microsoft ergonomic keyboard?

This was added to your wishlist. You added Microsoft Ergonomic Keyboard to your wish list. You can share this list with others. Work in comfort all day. Microsoft Ergonomic Keyboard reduces fatigue and delivers a slim, refined design with split keyboard, improved cushioned palm rest…

Are ergonomic keyboards good for carpal tunnel?

Given the time you spend with your hands on a keyboard, investing in Microsoft’s best-selling line of ergonomic keyboards can pay dividends in greater comfort. According to some studies, ergonomic keyboard designs, such as the Microsoft Natural line, have been associated with significant reduction of carpal tunnel syndrome symptoms.

What time is IST in Germany?

Getting Started

India Standard Time (IST) to Berlin, Germany ( in Berlin)
8 am IST	is	4 am in Berlin
9 am IST	is	5 am in Berlin
10 am IST	is	6 am in Berlin
11 am IST	is	7 am in Berlin

What is the standard time of India?

UTC +5:30 IST
Time Zone Currently Being Used in India

Offset	Time Zone Abbreviation & Name
UTC +5:30	IST	India Standard Time

What is GMT time in Germany?

Time Zone Currently Being Used in Germany

Offset	Time Zone Abbreviation & Name	Current Time
UTC +2	CEST	Thu, 10:28:56 pm

What does the German word ist mean?

What does Gott ist mit mir mean in German? Gott ist mit mir. English Translation. God is with me. Find more words! Another word for Opposite of Meaning of Rhymes with Sentences with Find word forms Translate from English Translate to English Words With Friends Scrabble Crossword / Codeword Words starting with Words ending with Words containing

What does Was ist Morgen mean in German?

What does morgen mean in German? morgen. English Translation. tomorrow. More meanings for morgen. tomorrow adverb. morgen. Find more words!

Was ist eine gute conversion rate?

– Wie ist der Verlauf meiner Conversion Rate über die letzten Monate hinweg? – Gibt es Marketing-Kanäle mit besonders hoher/niedriger Conversion Rate? – Wie ist meine Conversion Rate im Vergleich zu der meiner Wettbewerber?

How to say next time in German?

How to say “Next time” in German (Nächstes Mal) We have audio examples from both a male and female professional voice actor. Male Voice. Nächstes Mal. Next time. Practice saying this sentence. See also: Free Dictation Practice, Free Listening Comprehension Practice, Free Vocabulary Flashcards.

What does good condition mean AbeBooks?

Good (G): Describes the average used worn book that has all pages or leaves present. Any defects should be noted by the seller. Fair: Worn book that has complete text pages (including those with maps or plates) but may lack endpapers, half-title, etc. (which must be noted).

What are the conditions of a book?

Book Condition Guide

Fine/Like New (F) Book may have been read.
Near Fine (NF) Clean, with no defects, but may show slight wear at edges of book or dust jacket.
Very Good (VG) Shows signs of wear.
Good (G) Average used book with all pages present.
Fair (FR)
Poor (P)

How do you describe the condition of an old book?

There can be no defects, no missing pages, no library stamps, etc., and the dust jacket (if issued with one) must be perfect, without any tears. (The term As New is preferred over the alternative term Mint to describe a copy that is perfect in every respect, including jacket.)

What does book condition fine mean?

as new
Fine (F or FN) is “as new” but allowing for the normal effects of time on an unused book that has been protected. A fine book shows no damage. Very good (VG) describes a book that is worn but untorn. For many collectors this is the minimum acceptable condition for all but the rarest items. Any defects must be noted.

What is like new condition?

Like New Condition means a vehicle that has not been driven or towed more than the limited use necessary in moving or road testing a new “auto” prior to delivery to a customer.

What is foxing on a book?

Foxing. The term ‘foxing’ describes disfiguring small yellow brown spots or blotches on paper. Two main causes are mould and iron contaminants in the paper. Moulds feed on the paper itself, as well as any dirt or organic material on it, for example, finger marks, food stains and squashed insects.

How do you describe a book binding?

Bookbinding is the process of physically assembling a book of codex format from an ordered stack of paper sheets that are folded together into sections called signatures or sometimes left as a stack of individual sheets. Several signatures are then bound together along one edge with a thick needle and sturdy thread.

What does dust jacket condition mean?

The dust jacket is tattered or has large chips missing or has been scratched or scribbled on. The dust jacket is customarily described separately, as in, “Fine in fine dj”. “Lacks dj” is noted if it is. Best to mention if a hardcover book never had a dust jacket, as in, “Good condition.

What is considered like new condition?

Like New Condition means refurbished to the latest revision to meet all applicable electrical, mechanical, firmware and cosmetic specification and Engineering documentation, including the replacement of damaged or missing non-functioning parts.

How do you know if a book is fair or poor?

Fair: Worn book that has complete text pages (including those with maps or plates) but may lack endpapers, half-title, etc. (which must be noted). Binding, jacket (if any), etc., may also be worn. All defects should be noted. Poor: Describes a book that is sufficiently worn. Any missing maps or plates should still be noted.

What defects should be noted when buying a used book?

All defects should be noted. Poor: Describes a book that is sufficiently worn. Any missing maps or plates should still be noted. This copy may be soiled, scuffed, stained or spotted and may have loose joints, hinges, pages, etc.

How can you tell if a book is sunned?

Sunned – Faded from exposure to light or direct sunlight. Tight – The binding of a new book is very tight; that is, the book will not open easily and generally does not want to remain open to any given page. As the book is used, the binding becomes looser until a well-used book may lay flat and remain open to any page in the book.

What should I look for when buying a used book?

Any defects should be noted by the seller. Fair: Worn book that has complete text pages (including those with maps or plates) but may lack endpapers, half-title, etc. (which must be noted). Binding, jacket (if any), etc., may also be worn.