February 2021 – Page 642

Are Strats wired series or parallel?

parallel wiring
LEFT: On a stock, modern Strat, the dual-pickup settings (positions 2 and 4) use a parallel wiring scheme. RIGHT: When two pickups are wired in series, the output of one pickup goes into the input of the other, increasing volume and emphasizing low and midrange tones.

What is on the back of a Strat?

In the Stratocaster, the coil springs are located in the rear of the body, under the backplate, and it is essential that these springs don’t touch any other parts, such as the woodwork or the backplate itself.

Is series wiring louder than parallel?

As a general rule, parallel speakers are louder than series speakers. That’s because: Wiring speakers in series increases the total speaker impedance (Ohms) load, decreasing how much electrical current (amps) can flow. This means the amp or stereo’s power output will be lower.

How many springs should be in a Strat?

Re: Strat tremelo setup – how many springs? 2 springs is quite standard on most mexicans/other foreign productions.

Is Position 1 bridge or neck?

Position 1: Bridge pickup only. Position 2: Bridge pickup and middle pickup together. Position 3: Middle pickup only. Position 4.

What kind of wiring do you use for a Stratocaster?

We wanted to go through a few variations of the Stratocaster wiring, as well as some mods you can make to your Strat to super-charge it. For the sake of brevity, we are only going to be focusing on Fender Strats with three Single Coil pickups, or, ‘SSS’ Strats, but this wiring also can apply to HSS strats as well!

How do I Lay the wires on my Stratocaster pickguard?

Due to the routing of the Stratocaster Body, you might only have a narrow channel to lay your wires. The best way to make sure your wires stay nice and neat is to use some Masking Tape or Shrink Tubing on your pickup wires like so: Using Masking Tape or Shrink Tubing to keep your wires neat will ensure your pickguard will lay nice and flat.

What is a Stratocaster® guitar?

The standard Stratocaster® is arguably the most recognizable of all guitar shapes and is typically a 3 single-coil pickup configuration mounted on the scratchplate. Below is a list of the components you should have included in your guitar kit.

How do you wire a Strat?

– The best part of wiring a strat is that you can do it on the pickguard and drop it into your guitar afterwards. That being said, find a clear, well lit and flat work space to do the wiring away from your pride and joy! – Ensure your soldering iron is tinned and at a suitable temperature.

What is Ka-band Internet?

Ku-band uses frequencies in the 12 to 18 GHz range, while Ka-band uses frequencies in the 26.5 to 40 GHz range. With a higher frequency, you can extract more bandwidth from a Ka-band system, which means a higher data transfer rate and, therefore, higher performance.

What is frequency of Ka-band?

between 26.5 GHz and 40 GHz
The range of frequencies in which the Ka band operates are those between 26.5 GHz and 40 GHz; that is, wavelengths range from a little more than a centimeter to 7.5 millimeters.

What is military Ka-band?

Since the designation in the 1970s of a military satellite communications Ka-band (30-31 GHz uplink, 20.2-21.2 GHz downlink), these frequencies have held great potential to support US forces and requirements.

What is Ku and Ka-band primarily used for?

Ku band is primarily used for satellite communications, most notably the downlink used by direct broadcast satellites to broadcast satellite television, and for specific applications such as NASA’s Tracking Data Relay Satellite used for International Space Station (ISS) communications and SpaceX Starlink satellites.

Is Ka band affected by weather?

Ka-band RF signals are far more sensitive to rain, ice and snow on the Earth station antenna.

Who uses the Ka band?

communications satellites
Tag: Ka Band The 30/20 GHz band is used in communications satellites, uplink in either the 27.5 GHz and 31 GHz bands, and high-resolution, close-range targeting radars aboard military airplanes. Some frequencies in this radio band are used for vehicle speed detection by law enforcement.

What devices use Ka-band?

Tag: Ka Band The 30/20 GHz band is used in communications satellites, uplink in either the 27.5 GHz and 31 GHz bands, and high-resolution, close-range targeting radars aboard military airplanes. Some frequencies in this radio band are used for vehicle speed detection by law enforcement.

What are Ka-band satellites?

Ka-band satellite broadband is a proven technology, delivering high-speed services to customers beyond the reach of terrestrial networks. • Over 1 million premises are equipped with satellite broadband in the USA. • Ka-band introduces higher download and upload speeds at lower cost.

What are Ka band satellites?

What is the use of Ka band?

The Ka-band frequency allows the use of smaller antennas. Ka-band frequency can be used in high-resolution, close-range targeting radars, military aircraft, space telescopes, commercial, wireless point-point microwave communication systems, vehicle speed detection systems, and satellite communications.

Is Ka band affected by rain?

Abstract. The significance uses of Ka-Band and higher frequencies is due to high bandwidth demand from internet users, nevertheless, these high frequencies are susceptible to attenuation impairment dominantly due to rain.

What is the Ka-band used for?

What is the bandwidth of Satcom Ka band?

the Ka band SATCoM has a bandwidth of 3.5gHz for both uplink and downlink. Table 1 illustrates the military and civilian frequency allocation. With the wider spectrum availability at the Ka band, higher traffic throughput can be supported. Full motion video for example, has been identified as a key driver

Is Ka-band the wave of the future for satellite communications?

In the critical area of public perception, Ka-band satellite services have become widely viewed as the “wave of the future” for satellite communications. Concerted efforts to market Ka-band have been successful. How much of the perception about Ka-band advantages is real remains to be proven.

What is the difference between Ka-band VSAT and Ku-band?

Because they are less common in the marketplace, Ka-band VSAT hardware tend to be more expensive than their Ku-band competitors with similar capabilities. In the critical area of public perception, Ka-band satellite services have become widely viewed as the “wave of the future” for satellite communications.

Is Ka-band the best choice for your business?

Streaming video, VoIP calls and web browsing are increasingly becoming part of the standard business profile. As a result, additional bandwidth is on the menu. And in those regions of the world where terrestrial broadband service is not available or because Ku-band networks are saturated, Ka-band service has become the service of choice.

Can you have a phobia of taking a blood pressure?

Abstract. While it is known that excessive anxiety surrounding the measuring of blood pressure may preclude an accurate measurement, it is not known whether it could also lead to phobic avoidance behavior.

What phobia is fear of blood pressure?

The term for the irrational fear of blood is hemophobia. It falls under the category of “specific phobia” with the specifier of blood-injection-injury (BII) phobia in the new edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5).

Is high blood pressure Permanent?

There is no cure for high blood pressure. But treatment can lower blood pressure that is too high. If it is mild, high blood pressure may sometimes be brought under control by making changes to a healthier lifestyle.

Does exercise lower blood pressure?

How exercise can lower your blood pressure. Regular physical activity makes your heart stronger. A stronger heart can pump more blood with less effort. As a result, the force on your arteries decreases, lowering your blood pressure.

How do I get Over my fear of blood pressure measurements?

If the instrument itself is the object of your fear, buy a cheap blood pressure cuff online. Familiarize yourself with how it works and what it feels like. Wrap the cuff around your arm and velcro it in place, then operate it and measure your blood pressure.

How to overcome blood pressure anxiety?

Overcome Blood Pressure Anxiety, Compulsion to Take Continued Readings. 1 Crack down on a plant-based diet and keep daily sodium intake under 2,000 mg. 2 Eat five to seven servings a day of raw vegetables and fruits (any combination). 3 Adopt a strength training and cardio exercise program. 4 If you smoke, QUIT.

Do you have a fear of blood pressure?

Nobody enjoys the idea of visiting a doctor. Studies suggest that your anxiousness levels can be a vital role in your systolic blood pressure rise. For some people it could be a difficult task to conquer the fear of blood pressure.

How to overcome the obsession over blood pressure?

Yes, you can beat the obsession over blood pressure once and for all. Just like me, you can overcome your worries about your blood pressure. Any negative thoughts can be beaten with positive or enlightening ones. However, sometimes you cannot manage them because you may be feeling very anxious or panicky.

How many calories are in a scoop of Mass Tech?

There are 840 calories in 5 scoops (230 g) of MuscleTech Mass-Tech. * The % Daily Value (DV) tells you how much a nutrient in a serving of food contributes to a daily diet….Edit this item.

Last updated	16 Sep 19 01:14 AM
Source	FatSecret Platform API

What is the use of mass Tech?

MASS-TECH is a powerful weight-gain formula developed with key massbuilding compounds that are shown in research to help increase size, strength, and overall mass.

Is Mass Tech whey protein?

MuscleTech Mass Tech Extreme Mass Gainer Whey Protein Powder MASS-TECH EXTREME 2000 features 80g of protein, over 400g of carbs and 2,270 mass-producing calories, plus 8.2g of L-leucine(when mixed with 20 oz. of skim milk), 10g of creatine, and 20 vitamins and minerals!

How many mass gainer shakes a day?

If you find yourself needing to meet extreme daily calorie requirements and the scale still won’t budge adding 2-3 servings of a weight gainer shake per day can help you to easily and effectively exceed those requirements.

Is mass tech protein good?

It’s definitely the best mass gainer I’ve have had, and I will continue to use it. It mixes great and does not make you feel bloated which many have a tendency to do. 3.0 out of 5 stars Great results quickly, bad results after a while.

How many servings are in mass Tech?

MuscleTech Mass-Tech Extreme 2000

22 Lbs.	Triple Chocolate Brownie
Serving Size: 6 Heaping Scoops (570g)
Servings Per Container: Approx. 18
Amount Per Serving	% Daily Value *
Calories	2,050

How many calories are in a MuscleTech Mass-Tech?

There are 1000 calories in a 5 scoops serving of MuscleTech Mass-Tech. Calorie breakdown: 8% fat, 67% carbs, 25% protein.

How many calories are in Mass Tech extreme 2000?

The new, scientifically superior MASS-TECH ® EXTREME 2000 formula delivers a massive 2,000 calories (when mixed with 475mL of skim milk), high-quality whey protein and easy-to-digest complex carbohydrates. This formula is so powerful you only need one serving per day!

Can I take Mass Tech without any heavy workouts?

BEST ANSWER: Taking mass tech without any heavy work outs leads to weight gain without lean muscle gain. If all you want is weight gain then that would be fine. BEST ANSWER: Taking mass tech without any heavy work outs leads to weight gain without lean muscle gain. If all you want is weight gain then that would be fine.

What makes mass-Tech extreme 2000 different from other mass gainers?

In addition, unlike many other mass gainer formulas, MASS-TECH EXTREME 2000 contains only high-quality, milk-derived protein sources with the highest biological value.

What is jumbo packet in a network adapter?

Jumbo Packet is an extension of network devices that allows for transmission of packets bigger than 1.5kB. Enabling Jumbo Packets can significantly increase video streaming performance. Note that not all network devices support Jumbo Packets.

Should I enable jumbo frames on my network?

When should jumbo frames be used? Use jumbo frames only when you have a dedicated network or VLAN, and you can configure an MTU of 9000 on all equipment, to increase performance. A good example of this approach is a separate SAN or storage network.

What should my MTU size be?

In most cases, the optimal value (for a home Internet router) is going to be 1500. If your router already shows an MTU value of 1500, you probably won’t be able to gain any additional benefit by performing this test.

How do I enable jumbo packets?

Right-click the NIC for which you want to enable jumbo frames and select Properties. Under the Networking tab, click the Configure button for the network adapter. Select the Advanced tab. Select Jumbo Frame and change the value from disabled to the desired value, such as 9kB MTU or 9,014 Bytes, depending on the NIC.

What devices support jumbo frames or jumbo packets?

Intel® Ethernet adapters and network connections support jumbo frames or jumbo packets (very large packets with size set by user). Devices with limited or no jumbo frame support are listed below.

How do I enable jumbo frames on my Network?

MTU is the key to using Jumbo Frames. The process of setting up your network comes down to changing the MTU setting on every device to 9000 bytes, instead of the default 1500 bytes. First, check each router, switch, and any other network specific device on your network. Make sure that it supports Jumbo Frames.

Does Windows 10+ support jumbo packets?

This includes Windows 10+, Linux, Mac OS X+. What is Jumbo packet or Jumbo Frame? A jumbo frame is an Ethernet frame with a payload greater than the standard maximum transmission unit (MTU) of 1,500 bytes. Jumbo frames are used on local area networks that support at least 1 Gbps and can be as large as 9,000 bytes.

What is the jumbo frame size for Ethernet?

If you have phones or other devices that don’t support Jumbo Frames, the Ethernet Frames coming from those devices will remain the standard 1500 bytes. The device will break down any Jumbo Frames that arrive at it.

How do I fix Vodafone Sure Signal?

Try rebooting the router and retest the internet connection. Turn off your Sure Signal and router or switch at the wall and wait 20-30 seconds, then turn it back on. Wait for the lights on your router/switch to indicate an internet connection has been established, and then power up the Sure Signal.

Why are Vodafone stopping Sure Signal?

Vodafone are getting rid of the service in September 2021 because they reckon there’s not enough use for it in the modern world. Networks have improved, mobile technology and signal are far better than ever, Wi-Fi can do everything we need to make telecommuting work – so Sure Signal’s no longer needed …

How does a Vodafone Booster work?

Your Vodafone Super WiFi Booster and Vodafone WiFi Hub router will work together to give one seamless WiFi network covering your whole home. There’s no need to change networks as you walk around your home. Your devices will automatically connect to whichever booster or hub gives the strongest signal.

How can I increase my Vodafone mobile signal at home?

Increase Vodafone net speed on your Windows smartphone

Go to settings & click on “mobile+GSM” option.
Set Data roaming option to Don’t Roam.
Set connection speed to 4G.
Go back and go to the “Access point” option.
Now click on Add icon.
Connection Name: Vodafone 2.
Set APN to – portalnmms.

How can I boost my Vodafone wifi signal?

Open your Vodafone Broadband app. On the Dashboard, choose Device Boost under the Connected devices tile. Choose the device you want to boost from the list of connected devices. Set how long you want to boost for.

How can I boost my Vodafone Wi-Fi signal?

How do I setup a Wi-Fi booster?

All you need to do to get started is plug the smaller adapter into a power outlet and connect it directly to your WiFi router using a network cable. By pressing the ‘clone’ button on the smaller adapter, the booster will automatically find out your current WiFi network name and password.

How do I connect my Vodafone signal booster?

Why choose Vodafone for roaming in Ireland?

With HD voice, our customers were among the first to experience the clearest call quality in Ireland. Best network in test. Vodafone roaming has a customer guide available giving all the relevant information for customers while roaming. This guide can be obtained through our retail agents or from our Customer Service Representative.

Is Vodafone the lowest dropped network in Ireland?

We are committed to maintaining our position as one of the lowest dropped call operators in Europe. Vodafone is currently Ireland’s leading network: Experiencing a connectivity issue?

Is the sure Signal Service secure?

Yes, all traffic carried through the Sure Signal service is encrypted to maintain the high standards of security you expect from Vodafone. Learn more about security & fraud protection.

Why should I Choose Vodafone?

Our commitment to continuous testing and improvement means that with Vodafone you’ll get the best coverage available. We are committed to maintaining our position as one of the lowest dropped call operators in Europe. Vodafone is currently Ireland’s leading network:

What was the Apache music like?

Singing together in the Apache language is the most import ant part of Apache music, but musical instruments such as drums, flutes, and rattles are also used. Drums and rattles are especially used during dances, while flutes are particularly associated with love songs.

What is an example of Pan-Indianism?

Examples of Pan Indianism can be seen in powwow dancing being accepted by many tribes instead of just part of one tribe. Other examples might include the acceptance of certain ceremonies like the sundance or peyote meetings.

What are Vocables in Native American music?

use in Native American music Many Native American songs employ vocables, syllables that do not have referential meaning. These may be used to frame words or may be inserted among them; in some cases, they constitute the entire song text. Vocables are a fixed part of a song and help define patterns of repetition and…

What was the Cherokee Indians music like?

Over time Cherokee musical compositions came to include the fiddle, percussion, guitar, mandolin, and more. Cherokee musicians play everything from traditional Native American, to bluegrass, to rock and roll music.

Who is a pan-Indian?

PAN stands for “Presence Across Nation” PAN India Involvement means that there is one who is operating at several locations in India. and/or encompasses all of its ethnic, religious, or linguistic communities.

What is pan-Indian?

PAN is abbreviated as Presence Across Nation and is operating or available at every possible location. A mark of PAN India is given to an organization or firm or company if their entity or branches are spread across every state and their customers can avail of their services from anywhere in India.

What kind of music did the Plains Indians play?

The Sun Dance and Grass Dance of the plains are the roots of intertribal powwows, which feature music with terraced descent and nasal vocals, both Plains characteristic features. An example of an intertribal song is the AIM Song, which uses vocables to make it accessible to people of all tribes.

What is Pan-tribalism in music?

Many music genres span multiple tribes. Pan-tribalism is the syncretic adoption of traditions from foreign communities. Since the rise of the United States and Canada, Native Americans have forged a common identity, and invented pan-Indian music, most famously including powwows, peyote songs, and the Ghost Dance.

What are the characteristics of Indian drums?

Traditionally American Indian drums are large, two to three feet in diameter, and they are played communally by groups of singers who sit around them in a circle. For smaller single-sided hand drums, a thinner frame or shell is used, and a rawhide surface is strung onto only one side, with lacing across the other.

What is indigenous music of North America?

Indigenous music of North America. Indigenous music of North America, which includes American Indian music or Native American music, is the music that is used, created or performed by Indigenous peoples of North America, including Native Americans in the United States and Aboriginal peoples in Canada, Indigenous peoples of Mexico,…

https://www.youtube.com/watch?v=d954yj50cOE

What is the electron configuration for cd2+?

The electron configuration of cadmium ion(Cd2+) is 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10. This electron configuration shows that the cadmium ion(Cd2+) has four shells and the last shell has eighteen electrons and it achieves stable electron configuration. Cadmium atom exhibit +2 oxidation state.

What ion is cd2+?

cadmium ion
Cadmium, also known as cadmium, ion (cd2+) or cadmium ion, is a member of the class of compounds known as homogeneous transition metal compounds.

Are both protons and electrons the same?

Proton—positive; electron—negative; neutron—no charge. The charge on the proton and electron are exactly the same size but opposite. The same number of protons and electrons exactly cancel one another in a neutral atom.

Are protons neutrons and electrons the same number?

The number of electrons in a neutral atom is equal to the number of protons. The mass number of the atom (M) is equal to the sum of the number of protons and neutrons in the nucleus. The number of neutrons is equal to the difference between the mass number of the atom (M) and the atomic number (Z).

Is Cd2+ paramagnetic or diamagnetic?

Hence, Cd+2 , with one less electron from a fully-occupied orbital, is paramagnetic.

Why are protons and electrons equal?

When an atom has an equal number of electrons and protons, it has an equal number of negative electric charges (the electrons) and positive electric charges (the protons). The total electric charge of the atom is therefore zero and the atom is said to be neutral.

What is proton and electron?

Electron, proton, neutron are subatomic particles which build the atom. The atom consists of a central nucleus containing neutron and proton. Electrons revolve around the nucleus. Electrons are negatively charged, proton is positively charged and neutron is neutral.

How are protons and neutrons similar?

Like protons, neutrons are bound into the atom’s nucleus as a result of the strong nuclear force. Protons and neutrons have approximately the same mass, but they are both much more massive than electrons (approximately 2,000 times as massive as an electron).

How many electrons does cadmium (Cd) 2+ have?

Explanation: Cadmium, Cd, is located in period 5, group 12 of the periodic table and has an atomic number equal to 48. This means that a neutral cadmium atom will have a total of 48 electrons surrounding its nucleus. This also tells you that the Cd2+ cation, which has two electrons less than the neutral atom, will have a total of 46 electrons.

What element has 2 protons and neutrons?

The element of an atom with 2 protons is always helium. If you are given the atomic weight of an atom, you need to subtract the number of neutrons to get the number of protons.

How many protons and electrons does Zn2+ have?

The number of protons of an atom cannot change via any chemical reaction, so you add or subtract electrons to get the correct charge. If an ion has a 2+ charge, like Zn 2+, this means there are two more protons than electrons. 30 – 2 = 28 electrons

How many protons and electrons does zirconium have?

Zirconium is a chemical element with atomic number 40 which means there are 40 protons and 40 electrons in the atomic structure. The chemical symbol for Zirconium is Zr. Zirconium is a lustrous, grey-white, strong transition metal that resembles hafnium and, to a lesser extent, titanium.

How do I download apps on my Samsung Blu Ray player?

Each Blu-ray Disc® Player has a set amount of pre-installed applications….

On the supplied IR remote control, press the HOME button.
Select the All Apps.
Press the ENTER button.
In the All Apps screen, select the app you want to add.
Press the OPTIONS button.
Select Add to My Apps.

Is there an app to control my Samsung Blu Ray player?

Turn Samsung Galaxy Phone into Universal Remote Control If you own a Samsung Galaxy phone, you can make use of SmartThings App by Samsung Electronics to turn your Samsung Galaxy Phone into Universal Remote for your TV, DVD Player and others. 1. Open Google Play Store > Download SmartThings App on your phone. 2.

How do you get a Samsung DVD player to play without the remote?

There are 7 solutions to get your DVD player to play without remote.

Solution 1. Use the built-in controls on your DVD player.
Solution 2. Use your TV remote as a replacement.
Solution 3. Install a remote control app on your phone.
Solution 4. Buy a replacement remote for your DVD player.
Solution 5.
Solution 6.
Solution 7.

How do I program my Samsung Blu Ray remote to my TV?

Set up your Samsung universal remote

Press the Home button on your TV remote to access the Home Screen.
Press UP on the directional pad to access Universal Remote, and then select Universal Remote on the Source screen.
Next, select Start and make sure the device you want to connect is turned on.

Can I control my Blu-ray with my phone?

Now you can use Media Remote app on your Android device to control your Blu-ray Disc Player.

How do I pair my Samsung remote bn59?

Point the remote at the IR sensor and on your smart hub press the RETURN and GUIDE buttons simultaneously. Hold them down for three seconds then stand back and watch the left side of the screen for pairing information.

How do I program my Samsung AH59 remote to my TV?

How to Use a Samsung Remote Control Model AH59-01778F

Push the “TV” button on the remote.
Push and hold “Power” while entering one of the two-digit codes listed for your TV’s manufacturer in the User’s Manual of your Samsung home-theater system.
Release the “Power” button, then push the “Power” button again.

Is it lie in bed or lay in bed?

Is it “laying in bed” or “lying in bed?” Lying in bed is correct. Both “laying” and “lying” are the present participles of the verbs “lay” and “lie.” “Lay” is a transitive verb that refers to putting something in a horizontal position, while“lie” is an intransitive verb that refers to being in a flat position.

Is it I lie down or lay?

The difference in the present tense seems pretty straightforward: lay refers to a direct object, and lie does not. Past Tense: Lay: She laid the blanket on the floor when I asked. Lie: I felt sick, so I lay down.

What is past tense of lies?

The past tense of lie (as in, to tell an untruth) is lied. As you can see, the past tense of lie is lay, but the past tense of lay is laid, which is a recipe for confusion!

Is lie present tense?

lie (present,) lay (past) and lain (past participle).

How do you use lay in past tense?

In the past tense, “lay” becomes “laid” (Last week I laid down the law and told her it was inappropriate for her to pick her nose) and “lie” becomes “lay” (Yesterday she lay down for a nap that afternoon and picked her nose anyway). Yes, “lay” is also the past tense of “lie.” And the confusion doesn’t end there.

What is the sentence of lie?

“I’m going to lie down in the room.” “The boy just lay there looking at me.” “He was lying comfortably on the bed.” “He constantly lies to everyone.”

What kind of verb is lie?

irregular verb
Lie is a verb which means ‘to be in or put yourself into a flat position’. It is an irregular verb and it doesn’t take an object.

Is lie a homonyms?

The word lie is a homonym, meaning it has two different meanings even though it is spelled and pronounced the same when referring to either word. Lie is a verb that is commonly used to refer to one of the following two actions.

What is the past perfect tense of lie?

lain
The past tense of “lie” is “lay”: Dave and Susan lay sunbathing on the beach all day. The present continuous is “lying”: Dave and Susan are lying on the beach all day. The past perfect tense of “lie” is “lain”: They had lain sunbathing on the beach all day.

What is the difference between lying and laying?

To understand what the double-slit experiment demonstrates, we need to lay out some key ideas from Young wasn’t lying when he said, “The experiments I am about to relate…

How to use “lay” vs. “Lie”?

– I am going to lie on the sofa. (The subject is “I”; I lie.) – He often lies on his back in the grass and looks up at the sky. (The subject is “he”; he lies.) – She is lying on the bed. (The subject is “she” and the gerund (-ing) form of lie is “lying”; she is lying.)

What is the difference between Lye, lay vs Lie?

Aaron will often lie to his parents about doing his homework so that he has more time to play video games.

“I cannot tell a lie,” said the young George Washington. “I chopped down the cherry tree.”

Test Scores Don’t Lie: Charter Schools Are Transformative – The Wall Street Journal

What is the difference between lies and lays?

Spread:

Moneyline:

Total: The UNDER is 4-2 in Maryland’s last six games. Maryland is 7-3 ATS in its last 10 games vs. Ohio State.