How much is an oversize permit in Utah?

How much do permits cost?

What is considered oversize load in Utah?

“Oversize Load” signs front and rear are required on all vehicles/loads exceeding 10′ in width, or exceeding 14′ in height, and must be displayed to the rear of any vehicle which exceeds 92′ in length, whether loaded or empty.

How wide can a load be in Utah?

Utah law and Utah Regulations for Legal & Permitted Vehicles impose the following restrictions on vehicle width, height, length, and load extensions: A vehicle with or without a load may not exceed a width of 8 ½ feet. A vehicle with or without a load may not exceed a height of 14 feet.

Can oversize loads travel at night in Utah?

Loads 10′ to 12′ wide or 105′ in length may move on secondary highways at night with two certified pilot escorts. Loads 10′ to 14′ wide or exceeding 105′ in length may move at night with one certified pilot escort. Loads exceeding 14′ in height must have approval from UDOT.

Does Utah have a bridge law?

Not to exceed 11,000 pounds per axle. The axle, groups of axles, and GVW do not exceed the Utah bridge formula. The combination unit will conform to the bridge formula and the legal axle and gross vehicle weight limits. All axles in the group must be duals or super singles to be allowed maximum authorized weight.

How much overhang can you have on a trailer in Utah?

The 6 feet of rear overhang is measured from the rear bumper of the trailer to the end of the overhang, or from the 80 foot point on the flipper or ramp to the end of the overhang. The total overall length allowed including overhangs with or without ramps or flippers may not exceed 90 feet.

How long can you pull in Utah?

In Utah you can pull a double as long as it is less than 65 feet total length. I do it all the time and I am 67 feet long and have never had a problem.

What is the weight limit in Utah?

Maximum Legal Weight Allowed