How much is a CV joint Jeep Grand Cherokee?
The CV axle is a shaft that has two constant velocity joints at either end of it….
| Car | 2018 Jeep Grand CherokeeV8-5.7L |
|---|---|
| Service | Service typeAxle / CV Shaft Assembly – Driver Side Rear Replacement |
| Estimate | Estimate$722.94 |
| Shop/Dealer Price | Shop/Dealer Price$856.80 – $1202.15 |
Is it expensive to replace CV joints?
As for the labor cost, it usually starts at $110 to as high as $260 for a single CV joint replacement. While a double replacement can cost you as high as $360 for the labor cost. This brings your total upwards of $860 for a single replacement and around $1200 for two CV joints replacement.
What happens if your CV joint breaks while driving?
The Constant Velocity is sealed by a boot. This boot may get damaged, and when this happens, the joint will wear out and eventually fail. If you drive a car with a damaged CV, the joint will disintegrate further, making driving impossible. You’ll not be able to control the vehicle and may get involved in an accident.
Should I replace both CV joints at the same time?
On a high-mileage vehicle with a bad CV joint or boot, it’s often a good idea to replace both shafts at the same time. Often, the right (passenger side) shaft fails first because right turns are at a sharper angle than left turns, and right turns are more common than left turns.
How do you change the drive shaft on a Jeep Cherokee?
Position a brick or block of wood behind the front wheels. Lift the rear of the Cherokee with a jack. Place a jack stand under the frame on each side of the vehicle. Lower the jack. Place a flathead screwdriver through the drive shaft yoke.
How do you remove a CV joint from a car?
Raise the vehicle with a jack. Remove the jack stands. Lower the car with the jack. Remove the brick or block of wood. Place the transmission in park. Release the parking brake. Measure the distance from the CV joint cup to the end of the CV joint boot with the vehicle on the ground.
What type of drive shaft does a Jeep Grand Cherokee use?
The 1999 and newer Jeep Grand Cherokees use the Type 3 drive shaft with enclosed CV joints. Replacing the drive shaft is required when the CV joints are bad.
How much space do you need for a CV joint?
Measure the distance from the CV joint cup to the end of the CV joint boot with the vehicle on the ground. The required space is 5 1/2 inches. Loosen the lock nut on the drive shaft with a socket and ratchet.