Do carburetors have model numbers?
As per the picture, the one set of numbers can be found just above the carburetor fuel adjustment screws. The other set of numbers will be located on the other side of the carburetor. Clean the area around the numbers well as sometimes the numbers may be poorly stamped or have filled in with dirt.
How do you adjust an Aisan carburetor?
adjust the idle speed screw until the idle speed is about 700 rpm. Using a tachometer, adjust the idle mixture screw a little bit at a time in the direction that increase the rpm’s. I usually turn the screw in 1/4 turn increments.
What is a Holley 3310?
The legendary Holley 3310 was born. The 3310 feeds the Z16 Chevelle’s 396 big block with 780 cfm of air. The original Holley 3310 model 4150 carburetor used on the Z16 Chevelle featured vacuum secondaries and center-hung “cathedral” float bowls.
How an Aisan Carburetor works?
It travels through the passages in the carburetor body through the slow jets. The jets are precisely sized to allow just the right amount of fuel through. It goes up to the air horn and through the above indicated aperture into the carb throat.
How do you identify a carburetor?
Most carburetor bodies or housings are stamped with an identification number. The carb brand or manufacturer is usually cast into the metal. Some of the more popular OEM manufacturers are Hitachi, Mikuni, Zenith and Keihin. There are also many smaller, aftermarket carb manufacturers.
Do you carry Aisan carburetor kits for your cars?
We carry Aisan carburetor kits for most of Aisan carburetors. Aisan carburetors are used on several Toyota vehicles including Corona, Celica & Landcruiser.
Where is the model number on a diecast carburetor?
Updraft – diecast bowl – an identification number is stamped in tiny numbers on the underside of the bowl, or on the edge of the carburetor mounting flange. The number will be in the format 10-nnnn, where nnnn is some number generally LARGER than 500. Some Pontiac and Oakland units have a stamped “O” or “P” preceding the 10.
What kind of carburetors do Toyota use?
Its extremely good performance, lightweight construction, and high reliability made it possible for Aisan to become the OEM carburetor for several Toyota models of the 70s and 80s. At that time, Aisan carburetors were widely used on Toyota vehicles such as Corona, Celina, Land Cruiser, Corolla, Carina, and more.