What is the function of the sole plate?
Purpose: A Sole Plate is supplied when the customer requires a stable foundation to anchor the motor. Construction/Installation: The Sole Plate is a metal plate between 1.0″ and 1.5″ thick with four 3/4″ thick reinforcement pads welded under each foot of the motor.
What is the definition of sole plate?
Definition of soleplate 1 : the lower plate of a studded partition on which the bases of the studs butt. 2 : the undersurface of an iron.
What are sole plates made from?
If your building has a timber frame, then it has a sole plate or a cill plate as they are sometimes also known. A sole plate is the horizontal timber at the base of a wall frame, nearest the ground.
What is sole plate of an electric iron?
The definition of a soleplate is a metal plate at the bottom of an iron. The metal plate that presses down against your clothing when you use a clothes iron to press your clothes is an example of a soleplate. noun. The underside of a clothes iron.
Which coating is best for iron?
Materials such as polytetrafluoroethylene (PTFE) like Teflon, anodized aluminum coating, silicone coating, enameled iron coating, etc., can be used for the coating. They usually produce less sticky soleplate surfaces while ironing clothes.
Does bottom plate need pressure treated?
Pressure-treated bottom plates deal with the symptoms of the problem when a capillary break between wood and concrete deals with the cause. No direct contact, no need for pressure-treated bottom plates. A cautionary note about moisture meters and pressure-treated wood.
What is the top plate?
The top plate is the upper horizontal framing member of a stud wall. It is typically the same width as the studs and bottom plate and is some type of stress-graded dimensional lumber, commonly 2×4 or 2×6.
Which sole plate is best for iron?
Stainless steel soleplates have excellent glide when ironing and are also the easiest to clean. Ceramic soleplates help protect clothing from scorch marks but tend to also wear faster due to their special coating that can wear over time.
What is a soleplate?
I consider the soleplate to be the plate that is attached to the concrete, that is grouted in place. Sometimes the machine bolts directly to the soleplate, but quite often not.
What is the purpose of a sole plate on a pump?
The purpose of the sole plate, other than to provide a level machined surface for mounting the vertical pump discharge head , it must be able to withstand the moment and forces imposed on it by the piping strain if any via the discharge head.
What is the purpose of the sole plates on the grout?
Since the sole plates support the engine, it is important that the grout be installed properly to hold the plates level. Engines and common skids can be mounted directly to the grout without the use of sole plates.
How much Grout do you put on a sole plate?
When using sole plates, pour in enough grout to embed the plates 1/2 in. (13 mm) into the grout. When sole plates are not used, never allow the grout to come up over the engine base or common skid, to allow for future adjustments. Follow the grout manufacturer’s instructions for applying the grout and recommendations for curing times.