How do you reset a Traxxas controller?
With the transmitter powered off, move both sticks to the upper left position and hold, then power on the transmitter and release the sticks (Bring the throttle stick back to the middle position).
How do I reset my Traxxas Link transmitter?
Press and hold the transmitter’s SET button as you switch transmitter on. The transmitter’s LED will flash red slowly. Release the SET button.
Why is my Traxxas ESC blinking green?
Blinking Green: The speed control is indicating the transmitter Throttle Trim is incorrectly set.
Why is my Traxxas receiver blinking green?
Note: A common cause of a red/green flashing LED is holding the EZ-Set button too long when turning a vehicle off. To prevent this, simply unplug the battery to turn the vehicle off, instead of holding the EZ-Set button. Remember, never run a vehicle using a LiPo battery when the LVD is “OFF”.
How do I sync my Traxxas transmitter?
How to Bind Your Traxxas Transmitter to the Receiver
- Step 1: Turn the Power Off.
- Step 2: Access the Link Button on the Receiver.
- Step 3: Press and Hold the Set Button on the Transmitter.
- Step 4: Press and Hold the Link Button on the Receiver.
- Step 5: Wait for a Solid Green LED.
- Step 6: Enjoy Your Traxxas Vehicle.
Why is my ESC flashing red and green?
If the Low-Voltage Detection (LVD) is “ON” when a nickel-metal hydride (NiMH) battery is used an ESC may show the over-voltage alarm, indicated by a flashing red and green light.
Do I need to program the Traxxas TQI?
This article will teach you, The Traxxas Tqi programming steps. When you purchase a new Traxxas Vehicle, The radio and receiver are bound at the factory and all settings are set, so there is no need to program the system.
Do I need to bind my TQI system?
There are sometimes that you may want to or need to bind the system such as, “If” you replace the receiver or transmitter, or maybe you want to add another radio to your vehicle. To learn the basic programming setup for your tqi system, read on below as I will go through the main first few functions that you will want to be aware of and learn.
What kind of micro receiver does the TQI have?
The TQi features a 5-channel, telemetry-enabled micro receiver, item numbers 6518 or 6533 (TSM-enabled). One of these receivers is included with all Traxxas models that include the TQi (6533 for models including TSM), and the 6533 is included with the TQi when you buy the system separately.
Is the TQI compatible with Traxxas Stability Management (TSM)?
The second-generation TQi 2.4GHz receiver, item no. 6533, features telemetry compatibility; it also features the Traxxas exclusive Traxxas Stability Management (TSM). The TQi features a 5-channel, telemetry-enabled micro receiver, item numbers 6518 or 6533 (TSM-enabled).