Are 373 Gears good for the highway?
Rear end gears (2.79’s, 3.00’s, 3.25’s, etc) are great for freeway driving, bit not good for 0-60 MPH or accelerating from a dead stop. Shorter gears (higher numbers) are much better suited for accelerating, such as 3.55, 3.73, 3.91’s, 4.11’s etc….Are 3.73 gears good for highway?
| 3.73 Ratio | 4.10 Ratio |
|---|---|
| Higher Top Speed | Lower Top Speed |
What is the difference between 3.08 gears and 3.73 gears?
Going from 3.08 to 3.73 is kind of a big jump. But if you use a 2,500 rpm shift point, the difference is only about 4mph. With a shift point of 5,500 rpm, the difference is only 8mph.
Whats better 373 gears or 410?
4.10 is the typical gear ratio for a high-performance vehicle like a sports car or SUV because it provides better acceleration than 3.73 because of the faster second and third gears, which provide more torque at lower speeds to accelerate from a stop.
What gear ratio is a 373?
3.73 Ratio
Technical Details
| Manufacturer | Motive Gear |
|---|---|
| Brand | Motive Gear |
| Model | Motive Gear D35-373 Rack and Pinion, 41-11 Teeth, 3.73 Ratio |
| Item Weight | 11.45 pounds |
| Product Dimensions | 15.5 x 11 x 5.25 inches |
What does it mean to have 3.73 gears?
A numerically higher axle ratio provides a mechanical advantage to send more of the engine’s available torque to the rear tires (and front tires, in a four-wheel drive vehicle), but you pay the price at the fuel pump. So, a truck with optional 3.73 gears will tow a heavier trailer than one with 3.55 or 3.21.
How many teeth are in a 373 rear end?
Amazon.com: Motive Gear D35-373 Rack and Pinion, 41-11 Teeth, 3.73 Ratio : Automotive.
How do you count ring and pinion gears?
The calculation uses the number of teeth in the ring gear and divides it by the number of teeth in the pinion gear to provide you with a “[result] to 1” ratio. For example, if the pinion gear has 41 teeth, and the ring gear has 11 teeth, the ratio would be calculated as 41/11, which is equal to 3.73 = 3.73:1.
How many teeth does a 373 ring gear have?
41-11 Teeth
Technical Details
| Manufacturer | Motive Gear |
|---|---|
| Brand | Motive Gear |
| Model | Motive Gear D30-373 Rack and Pinion, 41-11 Teeth, 3.73 Ratio |
| Item Weight | 2.2 pounds |
| Product Dimensions | 15.5 x 11 x 5.25 inches |
What is a 3.42 gear ratio?
Axle ratios may be expressed in notation as something along the lines of “3.42:1,” or a “3.42 rear axle.” In either case, it essentially means the drive shaft and pinion need to rotate 3.42 times in order to rotate the axle shafts once.