How long should a kerosene wick soak before lighting?
60 minutes
Always allow the wick to soak completely before initial ignition. Soak the wick for at least 60 minutes in the down position in a full tank of fuel. Perform this soaking process for new wicks and anytime a wick has burnt dry.
How high should a kerosene wick be?
You want the flames to be a height of around 0.5 inches, which you can see from the window in the burn chamber. If the flame is too strong or weak, turn the wick knob clockwise to raise or anticlockwise to lower it.
What is dry burning a kerosene wick?
Dry burning is a cleaning process that burns your heater and wick completely out of kerosene. Do this process outside because it can get smelly and produce harmful gases. For best cleaning, turn the wick up to the maximum height just before it goes out.
Is it OK to use a kerosene heater indoors?
Kerosene heaters could be especially hazardous in bedrooms, particularly when units designed to heat large spaces are used in small rooms. “You need to keep an eye on a kerosene heater and if you’re sleeping, you’re not going to be able to do that,” warns a fire protection engineer.
How do you light a kerosene heater for the first time?
Lighting a standard kerosene heater is simple—after filling your heater’s fuel tank with 1-K grade kerosene and soaking the wick for a full hour, simply press and release the central ignition lever (if you’re using a model with an automatic ignition system), or lift the burn chamber and hold a lit match to the wick to …
How long is kerosene good for?
Kerosene. Kerosene has a shelf life of up to 5 years when stored in original packaging or an approved container. As kerosene ages, condensation adds water to the kerosene. Bacteria and mold will create sludge and break down the fuel.
How long does it take to dry burn a kerosene wick?
The first Dry Burning should occur within one week from the heater’s first use or after about 3 tanks of fuel. This is very effective and helps condition the fiberglass wick for longer life, less odor and peak heater performance. Under normal usage, most people will Dry Burn their wick about once a week.