What is the standard concrete block size?

Typically, concrete masonry units have nominal face dimensions of 8 in. (203 mm) by 16 in. (406 mm), available in nominal thicknesses of 4, 6, 8, 10, 12, 14, and 16 in.

What is the size of a standard metric block?

In 1979, the industry switched to metric sized blocks based on the following dimensions – height of 200 mm, length of 400 mm, width ranging from 100 to 300 mm. After accounting for 10 mm of mortar, the actual dimensions of the blocks are 190 mm by 390 mm by between 90 and 390 mm.

What size is a concrete block in Ireland?

Technical Specification

Description	Length	Height
6″ Soap	440	140
4″ Standard	440	215
6″ Block	440	215
12″ Blocks	440	300

How many blocks is 100 square feet?

14″ CMU Block Dimensions

Size D x H x W	Nominal D x H x W	Blocks per 100 ft2
14″ x 8″ x 8″	13 5⁄8” x 7 5⁄8” x 7 5⁄8“	226
14″ x 8″ x 16″	13 5⁄8” x 7 5⁄8” x 15 5⁄8“	113

What are the dimensions of a 4 inch concrete block?

440MM X 215MM X 100MM
Solid Block 4 Inch (440MM X 215MM X 100MM) | Buy Online.

What are the dimensions of an 8 inch concrete block?

Commonly available, size of 8″ full CMU or cinder block is 8 inches wide by 8 inches high by 16 inches long, which is represented in inch as 8 in × 8 in × 16 in or 200 × 200 × 400 in mm (wide × height× length).

How many blocks are in a lorry load?

FAQ’s

Question	Answer
How many blocks on a full load?	On a 8 wheel lorry – 10 lifts On a 6 wheel lorry – 8 lifts
How many blocks on a strap?	44 (440 x 215 x 100) 32 (440 x 215 x 140) 66 (440 x 140 x 100) 33 (440 x 300 x 100)

How many blocks are in a m2?

10 blocks
Blocks are priced per metre squared. 10 blocks per metre squared.

How do I calculate concrete blocks?

Calculate the area of a block by multiplying its height and width. Divide your wall area by the block area. The result is the total amount of blocks you need.

How do you calculate blocks per square foot?

Measure the length and height of the block in inches and then substitute the values in the equation square feet of block = (length of block x height of block) / 144. For example, a standard cement block measures 16 x 8 inches, so it covers 0.89 square feet — (16 x 8) / 144 = 0.89.

What length is a 4 inch block?

What are those huge concrete blocks called?

Jumbo block
Jumbo block are typically used for: Large retaining walls. Barriers to prevent vehicles from entering an area or running over something important. Traffic control. Large bins/bunkers for storing material like mulch, stone, or sand.

What are the dimensions of a concrete block?

Concrete blocks. A standard concrete block is 7 5/8 in. wide by 7 5/8 in. tall by 15 5/8 in. long. With a 3/8-in. masonry joint, that equates to 8-by-8-by-16 inches when the block is installed in a structure. To reduce weight, concrete blocks usually have two or three hollow cores taking up about 50 percent of the block’s volume.

What are the dimensions of partition and floor blocks?

Partition and floor blocks are 3 5/8 inches wide by 7 5/8 inches tall by 15 5/8 inches long, which equates to 4 by 8 by 16 inches when installed with a 3/8-inch masonry joint. Two partition or floor blocks stacked on top of each other with a 3/8-inch masonry joint between them are the same size as a standard concrete masonry unit.

What is the masonry unit of a concrete block?

The Concrete Masonry Unit. With a 3/8-in. masonry joint, that equates to 8-by-8-by-16 inches when the block is installed in a structure. To reduce weight, concrete blocks usually have two or three hollow cores taking up about 50 percent of the block’s volume. These cores make the blocks easier to reinforce during masonry construction.

What is the nominal dimension of a concrete brick?

The nominal dimension is the actual dimension of the concrete brick with the width of the mortar joint added. The average mortar joint for a CMU is 3/8 inch.