How much does a Pro Stock motor cost?
Modern pro stock engines generally produce around 2.5 hp/in3 (114 kW/L), and make upwards of 1,500 hp while being naturally aspirated. A complete NHRA pro stock engine can cost upwards of $100,000.
What is a mountain motor Pro Stock?
Pro Stock Mountain Motors have cubic inch displacements of 820 to 825 and beyond. Their capacities began much smaller, deriving from original equipment big-block engines of the sixties.
How much does a Pro Stock transmission cost?
Pro Stock Z Style 5-Speed $10,250 Rated to approximately 1,500 horsepower at 2,500 pounds.
How fast are Pro Stock cars?
Pro Stock engines use electronic fuel injection and spec gasoline and are restricted to a maximum of 500 cubic inches. They can make in excess of 1,300 horsepower. A competitive Pro Stock car can run in the 6.5s at more than 210 mph.
How much horsepower does a Pro Stock motor make?
A Pro Stock engine consumes two kinds of fuel: electronic fuel injection and spec gasoline. They can supply only a maximum of 500 gallons. Their peak power is over 1,300 horsepower.
How much power does a musi 959 make?
3000 HP
IF YOU WANT THE ULTIMATE PRO MOD ENGINE, THIS 959 IS THE ANSWER, FEATURING SONNY’S PRO MOD “GM” 16 DEGREE STAGE 2 CYLINDER HEADS, WITH SONNY’S NEW STAGE 2 INTAKE MANIFOLD. THIS ENGINE MAKES OVER 1800 HP NATURALLY ASPIRATED AND OVER 3000 HP ON FOUR SYSTEMS.
What engine does Pro Stock use?
What Engine Does Pro Stock Use? Chevrolet’s Pro Stock Drag Race Engine Competition (DRCE) provided the massive, naturally aspirated Chevy with the specs it needed one race weekend at a time, transforming the big, strong engine into the perfect, low-rpm machine for drag races.
How many gears does a Pro Stock car have?
5-speed
2020: Similar in design to the 1970s gearboxes, current Pro Stock cars utilize a 5-speed manual transmission from G-Force or Liberty. Straight-cut gears allow for clutchless gear changes, and teams frequently change internal gear ratios to suit changing weather and track conditions.
What is the rebuild process for a mountain motor Pro Stock engine?
Here captured in the following images with captions is the rebuilding process of a Mountain Motor Pro Stock engine. Pushrods are installed, WW billet rockers positioned, their shafts tightened to 35ft lb, and valve lash adjusted for engine warming on the dyno.
What is the cubic inch of a stock Mountain Motor?
Pro Stock Mountain Motors have cubic inch displacements of 820 to 825 and beyond. Their capacities began much smaller, deriving from original equipment big-block engines of the sixties.
How much horsepower does a pro stock engine have?
Today’s Pro Stock engines operate on compression ratios of around 18:1, run on VP race fuel grade Q16, and generate in the region of 1,900 horsepower. Depending on weather conditions, they run quarter mile elapsed times in 6.25 seconds at speeds close to 225mph.
Where can I buy a new Mountain Motor engine block?
New Mountain Motor engine blocks are available in either cast form from C&C Motorsports or in billet form from Dart. Here the billet block is exposed to the cleaning process. The art of cylinder honing is never taken more seriously than at Kaase’s.