What is Juniper SFP?
Juniper Networks SFP-1GE-SX compatible SFP transceiver supports up to 550m link lengths over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector.Each SFP transceiver module is individually tested to be used on a series of Juniper switches, routers, servers, network interface card (NICs) etc.
What is SFP 10G LRM?
The SFP-10G-LRM is a fiber optic transceiver module that conforms to the 10GBase-LRM 10 Gigabit Ethernet specification. It has the characteristics of low cost, low power, and miniaturization. It is also widely used in practical applications.
Is SFP-10G-SR single mode or multimode?
multi-mode
SFP-1000-LRM SFP+ 10G LRM transceiver multimode 220m range on OM1 fiber. Product description The SFP-1000-LRM is a short range multi-mode 10G SFP+ optical module compliant with 10GBase-LRM specs. It uses an FP laser transmitter at 1310nm. Line rate of transceiver is 10…
How do I know if I have SFP 1g or 10g?
From the Equipment tab, expand the Fabric Interconnect, Expand the associated module then click on the port in question. On the right side the SFP Model and Type will display.
How do I check my Juniper SFP status?
Additionally, the command output displays the PIC port number, type, small form-factor pluggable transciever (SFP) vendor, and part number information. To check the PIC media type and status for a particular FPC, use the show chassis fpc pic-status fpc-slot command.
Is LRM single mode?
It can be either single mode or multimode and has the advantages of low cost, low power consumption, small size and high density. SFP-10G-LRM(Long Reach Multimode) conforms to the standard of 10gbase-lrm Ethernet, apply both traditional and new multimode optical fibers.
Is SR single mode?
SR stands for Short Reach, and LR stands for Long Reach. SR transceivers are almost always multi-mode, and optimized for high speeds over relatively short distances. However, the much higher-powered OM3 and OM4 formats can push that into the hundreds of meters for a single cable.
What is the 1-port Gigabit Ethernet SFP mini-Pim?
The 1-Port Gigabit Ethernet SFP Mini-PIM interfaces a single Gigabit Ethernet device or a network. It supports a variety of transceivers with data speeds of 10-Mbps/100-Mbps/1-Gbps with extended LAN or WAN connectivity.
What is a 10G SFP+ transceiver?
Featuring low power consumption, high speed, this 10G SFP+ transceiver is ideal for data center, enterprise wiring closet, service provider transport application, Radio & Baseband Unit, etc. Minimum cabling distance for LR modules is 2m, according to the IEEE 802.3ae.
What is the Gigabit Ethernet SFP optical interface specifications?
Gigabit Ethernet SFP Optical Interface Specifications Parameter 1000Base-SX Transceiver model number SFP-1GE-SX Rate 1000 Mbps Optical interface Multimode Transceiver type SFP
What is the sfp-1ge-lh rate?
SFP-1GE-LH Rate 1000 Mbps Optical interface Single-mode Transceiver type SFP Maximum distance 9/125 SMF cable: 43.5 miles/70 km Transmitter wavelength 1355 through 1580 nm