How do you use euco diamond hard sealer?
Apply with high-volume, low-pressure sprayer, then scrub EUCO Diamond Hard into the surface with fine-bristled brooms or an auto scrubber. After keeping the entire surface wet with EUCO Diamond Hard for 30-40 minutes, the material thickens slightly and becomes gel-like.
What is euco diamond hard?
EUCO DIAMOND HARD is a unique blend of silicate and siliconate polymers that penetrate concrete surfaces and chemically react to provide an increase in surface density, durability, and abrasion resistance. Concrete treated with EUCO DIAMOND HARD is dust-proofed, resists tire marks, and is easier to maintain.
Is there a sealer for concrete?
There are two main types of concrete sealers: film-forming sealers and penetrating sealers. Film-forming sealers include acrylics, epoxies, and urethanes that form a coating on the surface of the concrete. Film-forming sealers, especially acrylics, are more susceptible to wear and will need to be reapplied frequently.
What does concrete Densifier do?
A concrete densifier is a liquid chemical spread evenly across the floor that penetrates the top surface layer of concrete. Its purpose is to fill the porous holes formed from water evaporation during the curing process, similar to how water fills the pores of a sponge.
Should you seal old concrete?
A: Yes! Old concrete can be sealed for the first time or resealed if it has been previously sealed with a concrete sealer. Before sealing old concrete you want to make sure you determine if the concrete has been previously sealed.
Is concrete sealing worth it?
Concrete performs quite adequately if it is never sealed at all, but applying a good quality sealer every few years will extend its life and keep it looking good. This is especially true if you have a stained or etched concrete driveway or patio.
Is concrete Densifier a sealer?
Concrete densifiers are silicate sealers of a sodium, potassium or lithium carrier designed to densify, harden, dustproof and increase the abrasion resistance of concrete. Most commonly used on warehouse floors in conjunction with a floor machine to polish and add a shine.
Can you polish concrete without densifier?
Answer: While polishing concrete, you want to densify after your 200 grit and before 400 grit typically, although we have customers that densify after 400 grit. If the floor is ‘soft’, you may even want to add an additional densification step earlier in the process to harden the floor.
Can you put too much sealer on concrete?
When the sealer is applied too heavily, the air displaced through the surface can’t escape, and it forms a bubble in the sealer surface. Bubbling of a sealer can also occur if application is done in hot weather, or if the concrete is in direct sun.
Does power washing remove concrete sealer?
A pressure washer can remove old concrete sealers. The sealer can be removed from concrete by using a pressure washer with a wand or an orbital walk-behind model. Keep in mind, however, that even though this method is effective, it may not completely remove the old sealer.
Can you put sealer over densifier?
Densifiers may be used on concrete prior to the preparation and application epoxy systems, though it is not common to do so. There are sealers which may be used after the application of a concrete densifier. A few manufacturers now have concrete densifiers that also contain sealers for a 1-step application.
What is a concrete hardener?
CONCRETE HARDENER is a water-based impregnating and hardening sealer of the highest quality, specifically developed to speed up and simplify the mechanical sanding and polishing process of concrete floors.
How do I use Euco diamond hard?
As the EUCO DIAMOND HARD begins to thicken and gel underfoot, lightly spray the area with clean water to break up the thickened EUCO DIAMOND HARD and move the excess material on to the adjacent floor area next to be treated. Do not track EUCO DIAMOND HARD onto untreated concrete, as permanent footprints or tire marks can result.
What kind of floor hardeners does Euco offer?
Euclid Chemical also offers a complete line of mineral and metallic aggregate floor hardeners for exceptionally durable and abrasion resistant floors. These floor hardeners, sealed with EUCO Diamond Hard, provide long-lasting and unbeatable performance. CARE AND MAINTENANCE SS57 © 2020 Kurez DR VOX
How long should new concrete cure before applying Euco diamond hard?
New concrete should cure seven days or longer before application of EUCO DIAMOND HARD. For fast track projects, the wet cure time may be reduced at the discretion of the project engineer.
What is CSH in Euco diamond hard?
• The combined activity of silicate and siliconate provides both a Odorless, non-toxic, very low VOCs Silicate in EUCO Diamond Hardreacts with the calcium hydroxide present in concrete, producing a hard, crystalline gel called Calcium Silicate Hydrate (CSH).