What is a ogee bit used for?
Fittingly, the Roman Ogee bit creates a decorative S-shaped profile for molding, furniture, signs, or under any other circumstance when a beautiful S-shape is desired. Ogee bits often incorporate straight edges at the top and bottom of the pattern with a convex curve in between.
What does an ogee bit look like?
The Ogee bit, also referred to as a Roman Ogee creates a compound, S-shaped profile. There are several variations on the Ogee profile, with shoulders on the edges or points in the middle of the profile. As with other edge bits, Ogee router bits often come equipped with a bearing tip.
What is a panel pilot bit used for?
Panel Pilot bits are the fast, efficient solution for cutting openings in paneling, siding, sheathing and other applications were speed and accuracy are the primary considerations. Freud’s carbide tipped and solid carbide Panel Pilot Bits will outlast high-speed steel bits many times before sharpening.
What is a panel raising bit?
These bits are used to cut the edges on panels for raised panels on frame and panel assemblies like doors and other furniture and panneling applications.
What is an ogee profile?
An ogee profile is a decorative moulding which is ogee-shaped. In homes they are often used for skirting, architraves, worktop edges, plinths, coving and cabinet cornices. It’s also called a cyma. The ogee profile on this worktop creates a more ornate finish.
How are ogee bits measured?
Length. This is the maximum length of the full cutting edge of the router cutter, and is measured from the top of the cutting edge to the bottom. Ogee cutting edge lengths range from 6mm (15/64″) to 28mm (1 7/64″).
What router bit to use to cut out windows?
Using a router and panel pilot bit is a fast and accurate method to cut out window and door openings. Here’s how to do it. First, install the panel pilot bit in a router with a 1/2-in.
What size router do you need to make raised panel doors?
You need at least a 2 HP router, and you must slow down the speed to less than 13,000 rpm. The router must also accept 1/2”- shank bits. A rigid router table and fence combo is a must-have for making raised panel doors. You will also require dust collection, eye and ear protection.
What kind of router bit do you use to make cabinet doors?
Bit #4: Finger Pull Router Bit for Cabinet Doors As you can imply by the name of this router bit, it works by simply creating a lip around the edge of the door that can be used to open and close the door.
Why is it called ogee?
While the origins of the word ogee are uncertain, it was first used in the whisky distilling industry. It refers to a bulbous chamber which makes up part of a traditional pot still. The ogee sits on top of the distilling pot and, as the liquid heats up, it creates a larger surface area for the vapours to land on.
Where does ogee come from?
Ogee windows and arches were introduced to European cities from the Middle East, probably via Venetian Gothic architecture. In particular, the ogee characterises Gothic architecture, especially in late Gothic decorative elements of the 14th and 15th century—styles called Flamboyant in France, and Decorated in England.