What is the default password for ReadyNAS?
An OS reinstall reboot resets the administrator user name and password of your ReadyNAS system to the factory defaults without erasing any of your data. The default credentials to log in to the local admin page are: Username: admin. Password: password.
How do I reset my ReadyNAS password?
You can reset your ReadyNAS Admin password by accessing http://ip_address_of_readynas/password_recovery. If you have forgotten the password recovery answer, you will need to perform a firmware re-installation to reset the admin password.
How do I access my ReadyNAS admin page?
Access the web admin page of the ReadyNAS by clicking Admin Page in RAIDar or enter the URL https://ReadyNAS_IP_address/admin – where ReadyNAS_IP_address is the IP Address seen in RAIDar.
How do I reset my Netgear ReadyNAS 104?
To access the boot menu:
- Power off your storage system.
- Using a straightened paper clip, press and hold the Reset button.
- While continuing to hold the Reset button, press and release the Power button.
- Continue to hold the Reset button until the status display screen shows a boot menu message.
- Release the Reset button.
How do I reset my Netgear NAS without losing data?
The following steps will help you with readynas factory reset without losing data.
- Turn off the power button on your Netgear readynas device.
- Take a sharp pin-like object and use it to press the reset button on readynas.
- Now, turn on your device and press the reset button once again using the reset button.
How do I reinstall ReadyNAS OS?
To perform an OS reinstall, continue to hold the Reset button until all Disk LEDs flash once, after about 5 seconds, and then release the button. To perform a factory reset, continue to hold the Reset button until all Disk LEDs flash twice (once at 5 seconds and then 25 seconds later), and then release the button.
How do I access the boot menu on my ReadyNAS duo?
Press and hold the Power button until all Disk LEDs flash the correct number of times, and then release the button. Check the table below for reference. Systems with an LCD (NV+ v1) also display the boot menu item text on the LCD at each stage. Press the Power button and continue to hold it for 5 seconds.
How do I access ReadyNAS 102?
Open a web browser and visit https://. is the name that you assigned to your ReadyNAS system or the default host name if you did not change it. Note: You can also enter https://, where is the IP address of the ReadyNAS.
How do I set up Netgear ReadyNAS?
To discover and set up your ReadyNAS storage system: Visit http://readycloud.netgear.com on a computer that uses the same local area network (LAN) and Internet connection as your ReadyNAS system. Click the Start button under Set up a new ReadyNAS. Click the Discover button.
How do I reset my ReadyNAS without losing data?
What is xraid2?
X-raiD2 is an auto-expandable raiD technology that is available only on readyNaS® systems. With X-raiD2, you do not need to know intricate details about raiD to administer your system. X-raiD2 allows you to add storage space without reformatting your drives or moving your data to another location.
How do I reset my Netgear ReadyNAS?
Using a straightened paper clip, press and hold the Reset button. While continuing to hold the Reset button, press and release the Power button to power on the system. To perform an OS reinstall, continue to hold the Reset button until all Disk LEDs flash once, after about 5 seconds, and then release the button.
How do I reset the password on my ReadyNAS?
The password recovery screen displays. Click the Reset button on screen to begin the process. A prompt appears instructing you to press the reset button on your ReadyNAS within the next five minutes. This is the physical reset button on your ReadyNAS system. Note: The location of the reset button varies depending on the model of ReadyNAS you have.
How do I reinstall my ReadyNAS to factory defaults?
An OS reinstall reboot resets the administrator user name and password of your ReadyNAS system to the factory defaults without erasing any of your data. Note: Both user name and password are case-sensitive. Access the boot menu of your ReadyNAS. The method to access the boot menu varies depending on the type of ReadyNAS you have.
What if I can no longer access my ReadyNAS by IP address?
If you can no longer access your ReadyNAS by IP address after the OS re-install use the RAIDar tool to find the new IP address. The data volume is not affected by performing an OS re-install.
https://www.youtube.com/watch?v=B1vZvWtY43A