Can you use any drain with Schluter?
Can I use another manufacturer’s drain with your Schluter®-Shower System? The Schluter®-KERDI-DRAIN and Schluter®-KERDI-LINE drains are specifically designed to integrate with the Schluter®-Shower System. The Schluter®-Shower System 10-Year Limited Warranty is void if other drains are used.
How does the Schluter drain work?
Schluter®-KERDI-DRAIN is a floor drain specifically designed to allow connections to Schluter-KERDI or other load bearing bonded waterproof membranes. The membrane is adhered to the large integrated bonding flange to form a waterproof connection at the top of the drain assembly.
How much does a Schluter drain cost?
Compare with similar items
| This item Schluter KERDI-LINE – Linear Drain Channel Body – 56″ – Center Drain – Grate Sold Separately | Schluter Systems Kerdi-Line Channel Body Shower Drain 36″ (KL1V60E90) | |
|---|---|---|
| Price | $35500 | $22104 |
| Sold By | Contractors Direct | Global Trade & Distribution Inc |
Can I use Schluter all set for Kerdi band?
Schluter ALL-SET® is suitable for use with ceramic, porcelain, and stone tile, including large and heavy tile, in conjunction with Schluter®-Systems’ uncoupling and waterproofing membranes (e.g., DITRA, DITRA-HEAT, KERDI, etc.), the Schluter®-Shower System, and KERDI-BOARD.
How do I install a shower drain with no access from below?
How to install shower drain without access below:
- Remove the existing shower drain.
- Measure and cut the assembly parts.
- Clean the area and pipes.
- Assemble and install the new drain.
- Apply a sealant and tighten the shower drain.
- Clean excessive sealant.
- Install strainer cover.
- Conduct a leak test.
What is Schluter all set used for?
Schluter ALL-SET® is a specialized, modified thin-set mortar for use as a bond coat within tile assemblies that is optimized for use with Schluter® membranes and boards. Schluter ALL-SET® is smooth and creamy, as well as easy to handle and spread.
Does a Kerdi drain have weep holes?
But with a Kerdi drain, there are no weep holes, unless those two elongated trapezoidal holes are the weep holes.
What size is the Kerdi drain?
KERDI-DRAIN ADAPTOR KITS, available in 5 1/4″ (133 mm) and 7 1/2″ (191 mm) diameter sizes, are used to convert traditional clamping ring drains to integrated bonding flange drains when removal of the clamping ring drain is not practical (e.g. when they are set in concrete slabs).
How much does it cost to install Schluter?
Installed cost with fasteners and labor is $3.25 to $4.75 per square foot. Uncoupling membrane Schluter-DITRA has the advantage of being waterproof. It is also the thinnest, ideal for use where you don’t want height buildup. DITRA (1/8”) and DITRA XL (5/16”) cost $1.35 to $2.15 per square foot for the material.
What mortar do you use for Schluter?
Schluter-Systems requires the use of Schluter SET™ , ALL-SET™ , FAST-SET™, or an unmodified thin-set mortar meeting the requirements of ANSI A118. 1 to install ceramic. (including porcelain) and stone tile over DITRA and DITRA-XL.
How to install Schluter Systems drain kit?
The traditional method for installing tiled showers is time and labor intensive and creates a “water in/water out” system. First, a mortar bed is sloped to the weep holes in the drain. The waterproofing membrane, called a pan liner, is placed over this “pre-slope” and clamped into the drain.
Is Schluter system any good?
The Schluter shower system offers a lot of value to the home. If you have the time, patience and enough skill to put this shower together, you’ll find it saves you a lot of money in the long run. If you’re interested in a non-DIY method then you can either hire a professional to install it or you can take a look at the Vigo shower enclosure .
How to install Schluter shower?
How to Install Schluter Shower Curbs. Once the shower tray is installed, you can add the Schluter shower curbs. Remember, thin-set has to be applied to the shower tray edge, floor, walls (where the curbs are going), and the edge of the curbs. Also, if you have two curbs being bonded to each other, apply thin-set to the edges of the curbs.
How to install a Schluter shower pan?
Prefabricated shower tray: Schluter®-KERDI-SHOWER-T/-TS/-TT