How do I access my Virgin Media Hub settings?
In normal router mode you access the Virgin Media router settings by: Typing http://192.168.0.1 into your web browser (or by clicking on the link to the left) Entering the router settings password in the box shown on screen – you’ll find that password on a sticker on the base of the router.
How do I access my virgin hub from modem mode?
Superhub 3 modem mode login
- Enter 192.168.0.1 into the address bar of your browser.
- Then locate the password for login – which is printed on the bottom of your router.
- Once you’re logged in, next select modem mode (located on the left of the screen)
- Select enable modem mode, then apply changes.
How do I log into my super hub 3?
By using a web browser of your choice and entering the IP address of your Super Hub 3 router in the address bar you will load the login screen. You can find the ip address on the back of your router. Now enter the default username and password of your router and you will be granted access to its admin panel.
How do I setup my virgin router to WPA3?
Enter your admin name and password which you can find on the backside of your Virgin Media Hub 3. Once signed in, go to Advanced Settings, click on Wireless and then click on Security. You’ll see a drop-down next to Security. Select WPA2 from the drop-down list for both 2.4 GHz and 5 GHz.
Is my Virgin Media 2.4 Ghz or 5GHz?
The Virgin Media Hub is an 802.11ac modem and it uses both 2.4Ghz and 5Ghz frequencies to give you the best Wi-Fi connection possible.
How do I change my Virgin Media to 5GHz?
Access the settings page by entering the web address shown on the Hub sticker. Click Advanced settings, then Wireless and then Wireless signal. Tick the box next to Manual which will enable the drop-down menu and choose a channel. There are different options for the 2.4GHz and 5GHz channel.
How do I access my virgin Hub 4?
Enter 192.168. 0.1 into the address bar of your browser, the settings page will then load. If you’ve enabled Modem Mode on the Hub you’ll need to use 192.168. 100.1 instead.
How do I put my virgin Hub 4 in modem mode?
Activating modem mode on the Virgin Media Hub 4
- Put 192.168.0.1 into the address bar of your web browser.
- You can find the password at the bottom of the hub.
- Modem Mode can be found on the left of the screen.
- Make sure that the Enable Modem Mode option is selected.
- Click on Apply to save your changes.
Where is my hub 3 settings password?
There are two passwords on the bottom of the Hub3, the WiFi password & the Admin password.
What is password for Virgin hub?
The default username for your Virgin router is admin. The default password is changeme.
How do I configure my virgin router to use WPA2 or WPA3?
How do I configure my virgin router to use WPA2 or WPA3?
- Enter 192.168. 0.1 into your browser.
- Enter your admin name and password*
- Once signed in, go to Advanced settings > Wireless. > Security.
- Select the dropdown next to Security and change it to WPA2-PSK **
- Select Apply changes.
Does Virgin Hub 3 support WPA3?
WEP requires the use of a ‘key’ (another term for a password), but it is relatively easy for a hacker to find out what this key is and hence gain access to your network. Whenever you can, make sure to use WPA or WPA2 instead of WEP. Note: The Super Hub 2ac and Hub 3 do not support WEP connections.