What setting do you put Scotts spreader on for grass seed?

For application using a pushed broadcast spreader, Scotts recommends a setting of 5 1/2 when overseeding and a bare-lawn setting of 8 1/4. With a handheld broadcast spreader, Scotts recommends a setting of 4 when overseeding or seeding a new lawn but suggests that the sower make two perpendicular passes for new areas.

What setting should my seed spreader be on?

Place your spreader setting on a low setting (usually one-fourth of the spreader setting range or less). Spread the material over a 50 x 20-foot area (1,000 square feet). If there is material left over, increase your setting. If you come up short, decrease your setting.

Can you use a Scotts drop spreader for grass seed?

Use the Scotts Turf Builder Classic Drop Spreader to apply grass seed and fertilizer in spring, summer or fall. The large hopper holds up to 10,000 sq. ft. of Scotts Lawn Care Products and is fully assembled.

How do you use Scotts spreader for grass seed?

How to Use a Scott’s Drop Spreader to Plant Grass Seed

1. Check the packaging of the grass seed you plan to use for recommended spreader settings and adjust the setting dial of your Scotts spreader accordingly.
2. Fill the hopper with grass seed while the spreader is disengaged.

What do the numbers on a seed spreader mean?

For fertilizer spreaders the numbers usually represent the amount of fertilizer that is to be applied over a specific square feet of land. On spreaders you can find numbers such as 5, 5 and a half or 18 and a half.

What setting do you put Scotts spreader on for fertilizer?

After choosing the best broadcast spreader for your yard, locate the orange dial on the spreader and turn it to the setting indicated on the seed or fertilizer bag. Turn clockwise for a higher setting of 12 or 14, which is for larger granules or grass seed, or counterclockwise to reach a lower setting of three or five.

What should I set my fertilizer spreader to?

Here’s how:

1. Set your spreader so that the opening(s) in the bottom are ¾ open when engaged.
2. Put 6.5 pounds or 1/5 of a bag of Milorganite into your spreader.
3. Begin fertilizing your lawn, starting along an edge, and continue until the spreader is empty.
4. Measure the area of lawn you fertilized.

Can I use a fertilizer spreader for grass seed?

Yes, using a lawn spreader for grass seed is absolutely okay. A lawn spreader is either used for spreading fertilizer or grass seeds. A handheld broadcast spreader is the best choice for spreading grass seeds on your lawn for the whole area.

What setting should I use on my Scotts spreader for fertilizer?

What setting should I use on Scotts Wizz spreader?

Spreader settings: Scotts Green Max Lawn Food (Regular Rate) – 4 1/4. Scotts Turf Builder Grass Seed Sun & Shade Mix (Reseed) – 5 1/4. Scotts Turf Builder Grass Seed Tall Fescue Mix (Reseed) – 7 (For new lawns, go over twice)

Can you use a fertilizer spreader for grass seed?

What do spreader settings mean?

A spreader setting is the rate in which you apply product to your lawn. Each Jonathan Green product has recommended rates of application and coverage based on bag size. The application rate is defined as the amount of material applied per unit area of land.

What setting should I use on Scotts spreader?

Divide 100 by the square foot the bag of fertilizer covers.

What setting should you use on a grass seed spreader?

Tall Fescue Grass Mixes. Tall fescue is a good choice if you are looking for a drought-tolerant grass that stands up to heavy foot traffic.

How to use Scotts spreader?

With a handheld broadcast spreader , Scotts recommends a setting of 4 when overseeding or seeding a new lawn but suggests that the sower make two perpendicular passes for new areas. The Wiz can hold up to 2500 SQFT of lawn care.

How to set a Scotts Turf Builder spreader?

Read the instructions on the bag of lawn fertilizer to see what the Scotts spreader setting should be.