Category: Interesting

How do you set up a TV antenna?

Installation Steps

1. Step 1: Find Your Local TV Stations.
2. Step 2: Shop For Your Antenna.
3. Step 3: Choose the Location Of the Antenna.
4. Step 4: Prepare the Tools.
5. Step 5: Mount the Antenna.
6. Step 6: Run the Cable to Your TV.
7. Step 7: Hook Up the Coaxial to Your TV Set.

How do I connect my antenna to my Smart TV?

Here’s how to do it:

1. Go to the Source menu. First, go to the Home menu, and navigate to the Source icon, on the far left.
2. Connect your antenna.
3. Select the source.
4. Start scanning for channels.
5. Complete the setup.
6. Start watching live TV.
7. Use the channel guide.

Can I use existing coax cable for antenna?

The quality of the existing cable. If it’s still in decent condition, then by all means you can use it. Compatibility. If your antenna needs to use RG6 cable but your existing cable is RG59, then there’s no way around it besides getting another antenna or using a brand new RG6 cable.

What input should TV be on for antenna?

Connect your antenna coaxial cable to the “Antenna In” jack on the back of your digital tuner box. Use a second coaxial cable to connect the “Out to TV” on the digital tuner box to the “Antenna In” on the back of the TV. Set the TV to Channel 3 or 4 as indicated on the back of your digital tuning device.

How high does a TV antenna need to be?

30 feet
In general, the higher you place your antenna, the better. It would be best to have your antenna placed 30 feet above ground level to give you the clearest over-the-air connection with a tower. For those looking for that height, outdoor antennas are usually a good place to start.

How do I hook up an antenna without coaxial input?

In order to use an antenna with a TV missing the needed coaxial port you can purchase a digital converter box. The converter box allows you to connect your antenna to the television AND they have built in tuners also.

What type of coaxial cable should I use for antenna?

RG6 cable
If you’re installing an indoor antenna or a short outdoor run, a standard RG6 cable should meet your needs. The quad-shielded RG6 cable features additional foil shields to fight electromagnetic interference and is ideal for longer runs.

Can I wire cable for antenna?

What is seen with hypertensive retinopathy?

Hypertensive retinopathy is retinal vascular damage caused by hypertension. Signs usually develop late in the disease. Funduscopic examination shows arteriolar constriction, arteriovenous nicking, vascular wall changes, flame-shaped hemorrhages, cotton-wool spots, yellow hard exudates, and optic disk edema.

What is the pathophysiology of hypertensive retinopathy?

Pathophysiology of Hypertensive Retinopathy Early findings include generalized narrowing of the retinal arteriolar vessels due to vasospasm and increased vascular tone. Chronic hypertension leads to structural changes in the vessel wall such as intimal thickening and hyaline degeneration.

What are the signs of stage 4 hypertensive retinopathy?

The condition can lead to symptoms including double or dim vision, loss of vision and headaches. Treating hypertensive retinopathy typically involves controlling high blood pressure through lifestyle changes, medication and careful monitoring. Through this, the condition can be halted, and the damage may slowly heal.

How do you treat hypertensive retinopathy?

Treatment of hypertensive retinopathy begins with controlling hypertension. Some of the complications can be treated by an ophthalmologist with injectable medications into the eye as well as laser treatments and surgery.

How do you find the V ratio?

A/V Ratio = 0.67. Count the marks and divide the arteriole diameter (in pixels) by the venule diameter (in pixels), and you achieve the final ratio of diameters.

Can high blood pressure cause bleeding behind the eye?

Damage to the blood vessels in the light-sensitive tissue at the back of the eye (retina) can lead to bleeding in the eye, blurred vision and complete loss of vision. Having diabetes in addition to high blood pressure increase the risk of retinopathy. Fluid buildup under the retina (choroidopathy).

What is the AV ratio in the eye?

The A/V ratio was determined using mean arteriole and venule width, the sum of widths of arterioles and venules, the sum of squares of widths of arterioles and venules, the central retinal artery equivalent (CRAE) and the central retinal venous equivalent (CRVE).

What are the symptoms of high blood pressure in the eyes?

What is hypertensive retinopathy (HR)?

Hypertensive retinopathy (HR) occurs when the retinal vessels get damaged due to elevated blood pressure. There has been significant evidence that hypertensive retinopathy acts as a predictor of systemic morbidity and mortality due to TOD.[1] 

What is hypertensive retinopathy and choroidopathy?

Treatment / Management The main purpose of screening for hypertensive retinopathy is that retinal vessels are the only blood vessels visible on routine examination. The effects of chronically elevated HTN are easily visible in the eye as hypertensive retinopathy and choroidopathy, and this reflects the vascular changes occurring in other systems.

What is the purpose of screening for hypertensive retinopathy?

The main purpose of screening for hypertensive retinopathy is that retinal vessels are the only blood vessels visible on routine examination. The effects of chronically elevated HTN are easily visible in the eye as hypertensive retinopathy and choroidopathy, and this reflects the vascular changes occurring in other systems.

What causes vision loss in hypertensive retinopathy?

Vision loss in hypertensive retinopathy is because of either secondary optic atrophy after prolonged papilloedema or retinal pigmentary changes after exudative retinal detachment. Complications Complications include[14]: Retinal artery occlusion

How do I change my vCenter appliance password?

Procedure

1. Browse to the vCenter Server Appliance in the vSphere Web Client or the VMware Host Client inventory.
2. Open the vCenter Server Appliance console.
3. Click inside the console window and press F2 to customize the system.
4. Type the current password of the root user and press Enter.

How do I reset my vCenter admin password?

In the vCenter Server Appliance Connect to vCenter Server Appliance through SSH. Press 3 to enter the Reset account password option. A new password is generated. Use the generated password to log in to [email protected] account.

How do I reset my vCenter 6.0 password?

Reboot the vCSA 6.0 using the vSphere Client. When the GRUB boot loader appears, press the spacebar to disable auto boot….to the kernel boot options.

1. Press Enter. The GRUB menu reappears.
2. Type b to start the boot process. The system boots to a shell.
3. Reset the root password by running below command. passwd root.

How do I reset my vCenter 6.5 password?

Procedure

1. Access the appliance shell and log in as a user who has a super administrator role. The default user with a super administrator role is root.
2. Run the localaccounts. user. password. update –username user name –password command.
3. Enter and confirm the new password when prompted.

How do I reset my vCenter password?

Procedure

1. Enter the username and password for [email protected] (or another member of the VMware vCenter Single Sign On administrators group.
2. In the upper navigation pane, click your username to access the menu.
3. Select Change Password and enter your current password.
4. Enter a new password and confirm it.

How do I reset my vCenter 5.5 password?

How to reset root password on vCenter Appliance 5.5?

1. Reboot the vCSA using the vSphere Client.
2. When the GRUB bootloader appears, press the spacebar to disable autoboot.
3. Type p to access the appliance boot options.
4. Enter the GRUB password.

How do I change my vCenter 6.7 password?

In the vCenter Server Appliance Management Interface, click Administration. In the Password section, click Change. Enter the current password and the new password, then click Save.

How to reset vCenter Server appliance root password?

Reboot the vCenter Server Appliance.

After the VCSA Photon OS starts,press the e key to enter the GNU GRUB Edit Menu.

Locate the line that begins with the word Linux.

Append these entries to the end of the line: rw init=/bin/bash The line should look like the following screenshot:

Press F10 to continue booting.

Run the command

How to install vCenter appliance?

Mount the ISO image on PC.

Open the vcsa folder and install the plug-in.

In the root of the ISO image,double-click the vcsa-setup.html file.

Wait until you are prompted to enable the client integration plug-in to run. Click Install.

How to remove VDP appliance from vCenter?

– Log in to the vSphere Web Client with an vCenter Server Administrative user. – When the error appears, click No. – Navigate to Administration > Client Plug-Ins. – Locate the client plug-in you want to disable. – Right-click this entry and select Disable. – Click Yes on the pop-up box for disabling the plugin.

How to back up a vCenter Server appliance?

Create a typical backup job.

VMware Tools Quiescence is disabled on the job level.

Ensure Application-Aware Processing and Guest File System Indexing are either disabled or excluded for the VCSA VM.

Customize other settings to desired configuration.

What does the prefix Clado mean?

branch
a combining form meaning “branch,” used in the formation of compound words: cladophyll.

What does techno mean as a root word?

techno- a combining form borrowed from Greek where it meant “art,” “skill,” used in the formation of compound words with the meaning “technique,” “technology,” etc.: technography.

What does the word phone mean translate to and where was its origin?

The term is derived from Greek: τῆλε (tēle, far) and φωνή (phōnē, voice), together meaning distant voice. A common short form of the term is phone, which came into use almost immediately after the first patent was issued.

What is the Greek root word that means wing?

Ptero-
Ptero- comes from the Greek pterón, meaning “wing” or “feather.” Here’s a word connection that may surprise you: the word helicopter also has a root in the Greek pterón.

How old is Skeppy?

22 years (January 17, 2000)Skeppy / Age

What is the root of a cladogram?

The root is the central trunk of a cladogram that indicates the ancestor common to all groups branching from it. A cladogram uses branching lines that end in a clade, which is a group of organisms sharing a common hypothetical ancestor. The points where the lines intersect are the common ancestors and are called nodes.

What is the difference between root and node and clade?

The root is initial ancestor that is common to all groups branching off from it. The clades are the branches that indicate related groups and their common ancestors. Nodes are the points that indicate the hypothetical ancestors.

What is a cladogram of hominids?

cladogram a cladogram of the hominoids, showing that chimpanzees and gorillas are more closely rleated to humans than are orangutans and gibbons clad·o·gram  (klăd′ə-grăm′, klā′də-)

What is a node in a cladogram?

A cladogram uses branching lines that end in a clade, which is a group of organisms sharing a common hypothetical ancestor. The points where the lines intersect are the common ancestors and are called nodes .

How do I Download Git client on Mac?

The easiest way to install Git on a Mac is via the stand-alone installer:

1. Download the latest Git for Mac installer.
2. Follow the prompts to install Git.
3. Open a terminal and verify the installation was successful by typing git –version : $ git –version git version 2.

Which Git client is best in Mac?

10 Best GUI Git Clients for Mac

• Sourcetree.
• Tower.
• GitKraken.
• Sublime Merge.
• SmartGit.
• GitUp.
• Aurees Git Client.
• GitBlade.

Is GitHub desktop available for Mac?

About GitHub Desktop installation You can install GitHub Desktop on supported operating systems, which currently include macOS 10.12 or later and Windows 7 64-bit or later. If you have an account on GitHub or GitHub Enterprise, you can connect your account to GitHub Desktop.

Can you use Gitbash on Mac?

In Mac you’ve already got Bash. If you go to your Launchpad and search for Terminal , this is the application you’ll use. In Windows you got Bash when you installed Git. Go to Programs > Git and select Git Bash .

How do I create a git repository on a Mac?

Initialise a Repository From Local MacBook (without git clone)

1. Create a project folder.
2. Initialise local git repo.
3. Add remote git repository.
4. Create a new local branch.
5. Start developing your project.
6. Add all files you want to commit.
7. Specify git credentials.
8. Push your local changes to remote branch.

How do I install GitHub client?

Installation

1. Open a browser.
2. Visit desktop.github.com.
3. Click Download for WIndows (64bit).
4. When prompted, click Run.
5. Allow the installation to download and install.

What is GitHub desktop client?

GitHub Desktop is an application that enables you to interact with GitHub using a GUI instead of the command line or a web browser. GitHub Desktop encourages you and your team to collaborate using best practices with Git and GitHub.

Who is Brandon Copeland?

Brandon Matthew Copeland (born July 2, 1991) is an American football linebacker who is a free agent….Brandon Copeland (linebacker)

Copeland in 2021
Personal information
Born:	July 2, 1991 Sykesville, Maryland
Height:	6 ft 3 in (1.91 m)
Weight:	263 lb (119 kg)

What is Brandon Copeland salary?

On the field, Copeland has a $990,000 base salary with the Falcons this year. Prior to signing with Atlanta this offseason, he spent time with the Patriots (2020), Jets (2018-2019) and Lions (2015-2017). He originally entered the NFL as a rookie free agent with the Ravens.

Who did Brandon Copeland play for?

Brandon Copeland (born March 31, 1986) is a former American and Arena football wide receiver. He began his football career in college at Bridgewater College for four seasons with the Eagles. In all four of his seasons with the Eagles, Copeland saw significant playing time.

Is Brandon Copeland a professor?

NFL player Brandon Copeland returning to Penn as a professor this spring.

What number is Brandon Copeland?

51Detroit Lions / Linebacker
51New York Jets / Linebacker51Tennessee Titans / Linebacker
Brandon Copeland/Number

How much money does a NFL linebacker make?

Linebackers. The average salary for linebackers is $1.8 million, and the Dallas Cowboys are paying the top two players, DeMarcus Ware ($11.1 million) and Anthony Spencer ($10.6 million via the franchise tag). David Harris is the top-ranked inside linebacker on the list, making $9 million.

What is Brandon Copeland’s base salary with the Falcons?

Brandon Copeland Contract Brandon Copeland signed a 1 year, $1,040,000 contract with the Atlanta Falcons, including a $50,000 signing bonus, $300,000 guaranteed, and an average annual salary of $1,040,000.

Where does Brandon Copeland teach?

At Penn, Brandon teaches a class called “Life 101” in his offseason. Brandon is teaching that class that we all wish we had in college, covering: Credit 101.

What is the lowest paid position in football?

The actual lowest paid position changes slightly each year as contracts change, but these three are always the among the lowest: fullback, tight end and long snapper. The current position earning the least pay is the fullback, with a median income of $616,000.

Who is highest paid linebacker in the NFL?

The highest-paid linebackers in the NFL | 2-10

• 5) Deion Jones, Atlanta Falcons | AAV: $14.25 million.
• 4) Foyesade Oluokun, Jacksonville Jaguars | AAV: $15 million.
• 3) C.J.
• 2) Fred Warner, San Francisco 49ers | AAV: $19 million.
• 1) Darius Leonard, Indianapolis Colts | AAV: $19.7 million.

Where did Brandon Copeland attend college?

University of PennsylvaniaBrandon Copeland / College

What is a package seat at the Lyceum?

Box Seats. The Lyceum Theatre’s box seats offer a restricted but unique view of the show with increased privacy. Boxes E and K are close to the stage and provide an amazing view of The Lion King’s opening sequence. Boxes A, B, F and G are set further back and higher up the sides of the auditorium.

Where are the best seats for Lion King?

The front mezzanine seats of any theatre are usually considered the best of the lot and that stands true for the Minskoff as well. Rows A-C, seats 119-129, offer the cleanest view of the stage in all its wondrous glory.

How many hours is the Lion King musical?

2 hours and 30 minutes
2 hours and 30 minutes, including one intermission.

How much does it cost to see the Lion King in London?

London theatre breaks to see The Lion King start from only £161 per person and each package includes: return coach travel (except for self-drive), overnight accommodation in a quality hotel, hotel-to-venue transfers, free time in London plus The Lion King theatre tickets with the option to upgrade to better seats.

How do I book tickets for the Lion King (2021)?

Now in its 21st year at London’s Lyceum Theatre, visionary director Julie Taymor’s acclaimed reimagining of Disney’s beloved film will redefine your expectation of theatre. Secure your tickets today and book with Disney’s official box office for The Lion King, Disney Tickets. Seats are now available for this holiday season and beyond from just £20.

Is the Lion King at the Lyceum Theatre London?

Now in its 21st year at London’s Lyceum Theatre, visionary director Julie Taymor’s acclaimed reimagining of Disney’s beloved film will redefine your expectation of theatre. Secure your tickets today and book with Disney’s official box office for The Lion King, Disney Tickets.

When is the next Lion King relaxed performance in London?

The next Relaxed Performance of The Lion King in London will take place at the Lyceum Theatre on Sunday 31 May 2020, tickets are now on sale. Click here for more information.

Which beads are best for hair extensions?

Aluminum beads are stable, long lasting and without a doubt the highest quality beads available. There is no need to match the bead color to the large variety of hair extension colors.

What are the bead hair extensions called?

Otherwise known as I-Tip or I-Link, microbead extensions use tiny beads to attach extensions to the natural hair.

What are the different types of extensions for hair?

The Different Types of Hair Extensions

• Clip-in Hair Extensions.
• Tape-In Hair Extensions.
• Sew-In Hair Extensions/Weave.
• Fusion & Pre-Bonded Hair Extensions.
• Microlink Hair Extensions.
• Wigs & Hair Pieces.
• Visit Show Salons in Londonderry.

Do silicone beads have metal?

Silicone beads are actually made of aluminum, a soft metal. Their name comes from the supple silicone coating that’s inside the beads, which lends them a smooth and soft hold that won’t fade or rust.

How much are K tip extensions?

The Cost. Since keratin hair extensions are pretty much the highest quality extensions you can get, they definitely don’t run cheap. Depending on what your desired result is, they can cost anywhere from $500 (a “half-head” for some added volume and fullness) to $3,000 for a full head of extensions.

What is micro bead extensions?

Micro bead extensions are made from Remy hair, which is 100 percent human hair. They attach to the head thanks to very small and discreet beads. The hair is clamped into place, lying flat to the head and adding volume and length. There are no damaging tools involved, and the application does not take that long.

How long do beaded extensions last?

around six-twelve months
Beaded hair extensions can last a long time. It is always important that you take care of your beaded hair extensions, as they are made from 100 percent human hair. This is going to make sure that they last longer. They can last around six-twelve months when they are properly cared for.

What types of hair extensions last the longest?

Generally speaking, bonded hair extensions will last the longest in place, since they are bonded to your strands of hair. You can expect to have these extensions in place for 3-6 months, depending on how fast your hair grows.

What does the silicone on the beads do?

How do you remove silicone bead extensions?

Try squeezing lightly at first and only increase the pressure if the ring doesn’t loosen. Once the ring has widened, the extensions will release and should slide out easily. If the extensions have been worn for some time, they may need a gentle pull to release the extension away from the hair.

How long do K tip extensions last?

6 months
Ktips are pricey, but for good reason. They look amazing and last for up to 6 months. You wear your hair every day, so it is an investment in your personal look and style.

What are the best micro bead hair extensions?

What is double-drawn hair? Double-drawn hair is perfectly thick hair,all of the equal lengths from top to bottom.

Why should I choose Remy hair? Remy hair,also known as Remi,is the absolute highest quality hair available.

What is Remy Premium Plus hair?

How to remove beaded hair extensions at home?

It is recommended to give hair a break from extensions.

It is recommended hair color or any other chemical treatments for a couple of weeks.

Throw beads out,and do not re-use beads.

Take proper care of hair extension to minimize tangles and matting in natural hair,and preserve hair extensions for future use.

How to sew in hair extensions without braids?

Decide if you want human hair or not. There are two kinds of extensions: human hair and synthetic hair.

Consider synthetic hair instead. If you’re looking to add thickness,synthetic is a great way to go because it creates more volume.

Choose a color.

Calculate how much hair you need.

Consider how you’ll wear your hair.

Wash and condition the hair.

What are the best hair extensions?

Tape-in hair extensions are perfect for those with fine hair.

Sew-in hair extensions work best for curly and thick hair.

Bonded and micro-bead hair extensions are meant for those with thick or medium thick hair.

https://www.youtube.com/watch?v=_l8UshNCqsE

What happens to mages in Dragon Age?

In the Dragon Age, most mages in Thedas belong to the Circle of Magi. As such, they are taken from their families while still children, and highborn children who are able to use magic will lose all claims to their family’s estates and titles when they are taken to the Circle.

Are mage good in Dragon Age: Inquisition?

Mages are some of the most powerful damage dealers in Inquisition, but they are significantly less durable than the other classes, and their high damage output can attract the attention of enemies.

Who is the best mage in Dragon Age: Inquisition?

1. Knight Enchanter – Best Dragon Age Inquisition Mage Specializations. Knight Enchanter is the most unique of all the Dragon Age Inquisition Mage Specializations.

Is Anders a blood mage?

Dragon Age Awakening: Anders is a blood mage – YouTube.

What is maige?

[adverb] well; carefully; fine; all right.

Should I choose mages or templars Dragon Age Inquisition?

Fans may have romanced some of them, or the player character is of the Mage class. Logically speaking, a Mage would probably prefer to choose Mages over Templars. Though Vivienne might disagree. Dorian and Solas obviously prefer the player choosing Mages over Templars.

Can you be a blood mage in Dragon Age: Inquisition?

Trivia. There is technically no blood magic specialization in Dragon Age: Inquisition. The writers thought that doing it properly it would require a lot more reactivity than other specializations, which would be detrimental to other content.

Should I choose mages or templars Dragon Age: Inquisition?

Can you be a blood mage in Dragon Age Inquisition?

What is the most powerful build in Dragon Age Inquisition?

Here are the top 10 best builds in Dragon Age: Inquisition.

1. Knight Enchanter Build. Spiritblade is the most elegant way to slice your enemies to ribbons.
2. Ultimate Tank Build.
3. Assassin Archer Build.
4. Invisible Pyromancer Build.
5. Artificer Archer Build.
6. Sword and Shield Reaver.
7. The Crusher.
8. Dual Wield Daggers Tempest Build.

Why did Anders leave the GREY wardens?

Anders healing a refugee Anders has left the Wardens to live in Kirkwall, where he uses his healing abilities to aid Fereldan refugees free of charge. He can be found in Anders’s Clinic in Darktown.

Why did Anders destroy the Chantry?

Its like what Isabela said, “Justice is an idea, it makes sense in a world of ideas, but not our world.” Anders destroyed the Chantry to ensure that there would be war, to ensure that things would change, for better or worse.

Are mages dangerous in Dragon Age?

Ignoring the mage conflicts in the Dragon Age universe is impossible, as it is central in main quests. No two mages are cut from the same cloth though. Some agree that they are dangerous while others think they deserve freedom, no matter the fears of people.

Are spirit healers watched by Templars in Dragon Age?

Few mages are watched more closely by the templars than spirit healers. For all the good they can do, their consorting with any denizen of the demon-infested Fade is a matter of intense suspicion. Still, the benefits outweigh the risks, if only just. Spirit Healer is one of the specializations available to the mage class in Dragon Age II .

What are the Mage conflicts in Dragon Age?

Updated August 19, 2021 by Allison Stalberg: Mages are a driving force in Dragon Age’s story. On one end, they can be dangerous and unpredictable and on the other hand, they can be saviors of Thedas. Ignoring the mage conflicts in the Dragon Age universe is impossible, as it is central in main quests.

Can a mage cast offensive spells in healing aura?

While this mode is active, the mage can use spirit healer spells and becomes a focus for restorative energies, increasing the natural healing of all allies within the aura. However, the mage cannot cast any offensive spell for the duration of the effect. Healing Aura now stretches further across the battlefield.

What was a copper boiler wash tub used for?

These old copper tubs were used to heat water for clothes washing, plucking poultry, and canning. This one has been well taken care of and polished to a lustrous shine.

What is the value of a copper boiler?

How Much is a Copper Boiler? A copper boiler can differ in price owing to various characteristics — the average selling price 1stDibs is $1,292, while the lowest priced sells for $685 and the highest can go for as much as $2,970.

How old are copper boilers?

Copper Boiler or Canner from about 1900.

What is a copper wash boiler?

A wash copper, copper boiler or simply copper is a wash house boiler, generally made of galvanised iron, though the best sorts are made of copper. In the inter-war years they came in two types. The first is built into a brickwork furnace and was found in older houses.

How do you clean a vintage copper boiler?

Baking soda and lemon juice. Apply the paste to the copper surface and start scrubbing and rubbing. It will be messy and requires some effort. When done, rinse well with water and buff dry with a soft cloth.

What were a copper and a mangle?

Clothes were soaped, scrubbed, rinsed, boiled in the copper, put through the mangle (two rollers that squeezed water out of clothes), soaked in ‘blue’ (to whiten bedclothes and white clothes), rinsed and put through the mangle again before being hung out to dry.

How do you clean an old copper boiler?

What is a wash boiler?

Definition of washboiler : a large metal vessel used for boiling clothes.

Should you clean antique copper?

Antique copper gives off a wonderful glow when properly cared for. Like all old metals, however, it must be handled with respect and gentle care to bring out its best. Wash your item in soapy water, gently scrubbing with scrubber-side of sponge to remove any accumulated dirt (crusty, sticky or mysterious).

How do you clean old copper wash?

Here’s how to clean copper with an old standby: vinegar.

1. Mix 1/4 cup salt, 1/4 cup flour and enough vinegar to make a thick paste.
2. Use a soft cloth to rub the paste on the surface of the copper.
3. Buff the copper item until it shines.
4. Rinse with warm water and dry thoroughly.

Why were Mondays wash days?

Victorian advice on housekeeping routines set in stone the idea that Monday should be wash-day, so that everything could be dried, pressed, aired and folded well before Sunday, the day of rest and clean clothes.

How did they wash clothes in the 1940s?

The hot clothes were rinsed in two or three changes of cold water and squeezed roughly by hand before being put through the mangle, which stood on the floor. Mangling was a two-handed job. The left hand fed the folded clothes through its two eight-inch diameter rollers, whilst the right turned the big iron handle.