How do I fix E1 33 error on my boiler?
If your boiler has shut down and is showing error code E133 or E28, then your condensate pipe may be frozen.
- Switch your boiler off at the control panel, and turn off the electricity at the wall.
- Find where the pipe is frozen, usually the most exposed part of the pipe.
What does E131 mean on a boiler?
Overheat lock out
Fault codes the end user may be able to clear
| Code | Possible fault |
|---|---|
| E125 | Overheat |
| E131 | Overheat lock out |
| E133 | Gas supply fault |
| E168 | PCB lock out |
Why does my Potterton boiler not fire up?
The boiler needs to recognise the fan is operational before starting up. The printed circuit board (PCB) gets this signal from an air pressure switch, which measures internal air pressure to determine if the fan is working. So, if the fan isn’t recognised, or the signal is intermittent, the boiler will: Not fire up, or.
What does E1 33 mean on a Potterton boiler?
E133. Indicates that the gas supply has been interrupted, ignition has failed or the flame has not been detected. Ensure that the gas supply has not been turned off, and turn the selector switch to the reset position and hold for at least 5 seconds.
Why does my boiler say E1?
Most of the time, the E1 Error Code means that the boiler is running low on pressure. All you have to do is repressurise your boiler, and everything will go back to normal.
How do I reset my Potterton boiler?
- Reset. bar.
- Off position. The boiler will not operate.
- Central heating. and hot water. Both heating and. hot water will operate.
- Hot water. Hot water will operate.
- Reset. Hold for approximately. 5 seconds and release.
What does E125 mean on a boiler?
E125 is a circulation fault code, this means water from the boiler supply radiators isn’t moving as it should, this could mean the pump is not functioning properly or a blockage. As with any boiler fault code relating to circulation or overheating , it is always worth ensuring the boiler has adequate pressure.
Why is my boiler not igniting?
If the boiler is not igniting, there is a possibility the valve is blocked, seized or there is damage in the wired connections. No Pilot Light: When the boiler is not igniting and the pilot light has gone out, this usually means debris has blocked the jet.
How do you Repressurise a combi boiler without a filling loop?
How to Repressurise a Boiler When There’s No Filling Loop
- Step 1 — Turn the Boiler Off.
- Step 2 — Find the Filling Key.
- Step 3 — Find the Manifold.
- Step 4 — Turn the Filling Key.
- Step 5 — Repressurise the Boiler.
- Step 6 — Turn the Nut to Repressurise the Boiler.
What does 00 mean on boiler?
’00’ or ‘0’, depending on your Logic model, informs you that the boiler is in standby and not receiving a demand from either the hot water or central heating. If you receive this fault code, try running a tap or turning the heating on to see if the status changes.
What type of boiler is Potterton Promax he plus?
The Potterton Promax HE Plus 15kW boiler is designed for open vented central heating and hot water systems with a hot water storage cylinder. It has a SEDBUK efficiency rating of 89.40%. The main advantage of the Promax HE Plus is its size.
What are the technical parameters of Potterton Promax Combi ERP 24?
4.2 Technical Parameters Technical parameters for boiler combination heaters Condensing boiler Potterton Promax Combi ErP 24 Rated heat output Seasonal space heating energy efficiency Auxiliary electricity consumption Other items 28 33 Low-temperature boiler(1)
What are the advantages of the Promax he plus?
The main advantage of the Promax HE Plus is its size. Weighing in at 26kg it’s very compact and measures 60x39x32. The 15kW model will more than meet any low heating requirements. But if you have high hot water and heating needs 24kW and 30kW options are also available.
Is the Promax Combi condensing combination boiler water byelaws approved?
The Promax Combi Condensing Combination Boiler is a ‘Water Byelaws Scheme – Approved Product’. To comply with the Water Byelaws your attention is drawn to the following installation requirements and notes (IRN).