How do I reset my Lenovo T61 laptop?
Re: Restoring Lenovo T61 to factory settings?
- Press the blue thinkvantage button during initial startup of the laptop.
- Then select restore to factory condition.
- Choose full factory restore.
How do I reset my Lenovo laptop BIOS password?
Extra Tip: How to Reset the BIOS Password on Lenovo Laptop?
- Open the computer case and find where the CMOS battery locates. Take out the CMOS battery and wait 10 – 25 minutes before putting it back in.
- Plug everything back in, power up the computer and enter the BIOS again. Now there is no more BIOS password anymore.
How remove Lenovo BIOS lock?
You can remove the BIOS and supervisor password by shorting the security chip. This can be done simply by putting a conductor (like a small screwdriver) on the SDA and SCL pins of the security chip during the bootup process. Remember to ALWAYS remove the BIOS battery.
What is the default password for Lenovo admin?
*blank
Hello, the default admin password is *blank* so you can hit enter to access the Administrator section of Device Settings.
How do you bypass a BIOS password?
BIOS passwords cannot be recovered. If you have forgotten one of the passwords that is set in the BIOS, resetting the CMOS or NVRAM helps reset the BIOS to factory default settings and remove the passwords from the BIOS. WARNING: Clearing the CMOS or NVRAM using a jumper resets the passwords in the BIOS.
What is Lenovo BIOS password?
Supervisor password (BIOS password) The supervisor password protects the system information stored in the ThinkPad Setup program. If you have set a supervisor password, no one can change the configuration of the computer without the password.
How do I reset my BIOS Administrator password?
Reset BIOS Password
- Enter the BIOS password (case sensitive).
- Press F7 for Advanced Mode.
- Select the ‘Security’ tab and ‘Setup Administrator Password’.
- Enter and confirm your new password, or leave this blank.
- Select the ‘Save & Exit’ tab.
- Select ‘Save Changes and Exit’, then confirm when prompted.
How do I remove a BIOS password?
On the computer motherboard, locate the BIOS clear or password jumper or DIP switch and change its position. This jumper is often labeled CLEAR, CLEAR CMOS, JCMOS1, CLR, CLRPWD, PASSWD, PASSWORD, PSWD or PWD. To clear, remove the jumper from the two pins currently covered, and place it over the two remaining jumpers.