How do you make a perfect waistband?
How to sew the perfect waistband
- Cut a length of fabric that equals your waistline measurement + 3cm seam allowance (1.5cm at each end).
- With right sides together, fold the length of fabric in half lengthways.
- Turn your waistband to the right side and press fold and seams.
What are the steps in attaching waistband?
- Step 1: Add a fusible interfacing on the WS of the front, wearer’s right-side and left-side lining waistbands.
- Step 2: Pin the main waistband to the skirt RS together.
- Step 3: Sew.
- Step 4: Take your lining waistband and Press 3/8” (1 cm) of one long raw edge towards the WS .
How do you sew a waistband together?
Instructions
- Cut Your Elastic to Fit. Following the instructions for your pattern, cut your elastic to fit the part of the body it’s going around.
- Pin the Ends Together.
- Join the Ends.
- Form a Square of Stitches.
- Divide the Elastic.
- Divide the Waistband Fabric.
- Apply the Band to the Fabric.
- Stitch.
How do I stiffen my waist?
Petersham is a sturdy woven tape used to stiffen covered waistbands and belts. Fusible slotted waistband stiffening helps to create perfectly folded edges for waistbands. Stay tape used to stabilise and support seams without adding extra bulk. Horsehair braid sewn to the hem of a garment to give body and shape.
What is the first step procedure in drafting your waistband?
Waistband construction Decide how wide you would like your waistband to be – consider a measurement between 2 and 6 centimetres. Draw a perpendicular line from either end of your original line, the height of your waistband. Complete the rectangle by connecting the end points of the lines drawn in the previous step.
How do you tighten your waist?
Attaching a Piece of Elastic to Your Waistband. Cut a small strip of elastic. If you do not want the look of an elastic waistband, you can sew a small strip of elastic into the back of your pants. This will help to cinch in your waistband in a less noticeable way.
How do you keep your waist from rolling?
Gently push the Ban Rol behind the seam allowance and, if necessary, use a point turner or tweezers to push it right into one finished corner of the waistband. Before pushing it into the other end of the waistband, place a pin through the first corner so that you do not pull the Ban Roll out of place.
How to sew the waistband of jeans?
Attach the waistband to the jeans Right sides facing, sew on the reverse side, start at one edge and sew over the folds. Again use a 1 cm (3/8 in) seam allowance. 12. Fold and press the edges on the inner waistband 13. Attach wonder-tape to the seam allowance on the inner waistband
How do you measure waistband length?
Length of the waistband = top edge of the skirt piece + 1″ seam allowance ( + 1″ overlap if you want an overlap for attaching fasteners like hooks, buttons etc) width of fabric piece = 4 1/4 inch for a 1.5 inch waistband Keep the waistband piece on the skirt waist edge, rightsides together.
How do you cut the side of a waistband?
Open your waistband again and fold it open the other side. Match your markings, and sew down the side, but don’t sew down the seam allowances. Cut off the excess on the sides, and snip off the fabric in the corner. Doing this will ensure a crisp corner when you flip the waistband right-way-out.
How do you make an elastic waistband with bias tape?
You can also use a hand needle and thread and sew tack stitches at seam joints. In this case a bias tape is sewn to the top edge and turned to the back and stitched there to make a casing for the elastic. Checkout the tutorial to sew this easy gathered skirt with a bias tape elastic waistband.