How do you replace a dimmer module?
They are designed to be easily substituted into the back of an existing product. You can do this by removing the knob and unscrewing the nut on your existing dimmer switch. The dimmer will then be easily removable from the back of the product and switched with one of the modules below.
What is a dummy dimmer module?
Dummy dimmer switch module that can be used to convert a dimmer switch into an on/off light switch. Ideal for use in non dimming circuits such as fans. Allows you to keep the same appearance of a dimmer switch but will only turn lights on or off. Also saves having to use a grid system.
Can you just buy a dimmer switch?
Instead of merely turning lights on or off, get a wide range of light by installing a dimmer switch. Most dimmers are designed to fit a standard wall box opening, which makes it easy to replace the switch for any incandescent or halogen light with a dimmer.
Can any switch be made dimmable?
A dimmer switch can be installed anywhere that an existing on or off switch is in place. Replacing the current toggle switch with a dimmer switch will allow you to change the lights’ brightness, so long as you are using a light bulb that is compatible with the dimmer you have chosen.
How do you remove a module from a dimmer switch?
They are designed to be easily substituted into the back of an existing product. You can do this by removing the knob (and the plate, on a Screwless product) and unscrewing the nut. The dimmer will then be easily removable from the back of the product and switched with one of the modules below.
How do I replace a dimmer switch with a standard switch UK?
How to Replace a Dimmer Switch with a Standard Switch
- Turn off the power.
- Remove the screws from the switch panel.
- Use a voltage tester on the wires.
- Remove the dimmer switch from the box.
- Attach the new standard switch.
- Push the new switch into the switch box.
- Turn on the power and test the new switch.
Do dimmer switches need special wiring?
New dimmers have either a green grounding wire or a green ground screw that you’ll have to connect to a grounding source if one is available. Houses wired with plastic-sheathed cable almost always have bare copper ground wires that you’ll connect to the toggle dimmer switch.
How do you bypass dimmer?
To bypass the dimmer switch you should jump the white-green-stripe wire with the white-black-stripe wire, or just connect the white-green-stripe wire to ground. Don’t connect the solid green wire to ground or to the white-black-stripe wire or you’ll blow a fuse.
