How to setup a TP Link?

How to setup a TP Link?

Turn off the modem,and remove the backup battery if it has one.

  • Connect the modem to your router’s Internet port with an Ethernet cable.
  • Turn on the modem,and then wait about 2 minutes for it to restart.
  • Connect the power adapter to the router and turn on the router.

    • How to configure a TP Link router?

    How to configure the basic wireless settings of TP-Link wireless DSL router. Step 1 Open the web browser and type the IP address of the device in the address bar (default is 192.168.1.1). Press Enter. Step 2 Type the username and password in the login page, the default username and password both are admin, Then click OK to log into the device.

    Why is my TP Link not working?

    – Ensure that you entered the correct Wi-Fi password of your router during configuration. – Hold the reset button/hole for 3s and reconfigure it. You can refer to Case 1. – Disable Mac filtering/Access Control/Band Steering functions on the main router. – If it is still the same, please provide the information attached below:

    What is TP Link?

    TP-Link is the world’s #1 provider of consumer WiFi networking devices, shipping products to over 170 countries and hundreds of millions of customers.

    How to operate your router in bridge mode?

    Using a device connected to your home network,open a web browser and go to the Admin Tool at http://10.0.0.1.

  • Enter the default username and password: Username: admin Password: password (case sensitive) Note: If you previously changed your Admin Tool password,use the new password to log in.
  • From the left-hand column,select Gateway > At a Glance.

    • How to restart TP Link router?

    TP-LINK ARCHER C6 AC1200 – Version 2.0 Hardware List: The following section presents the list of equipment used to create this tutorial.

  • Reboot schedule – Yes.
  • Reboot time – Enter the desired time to reboot.
  • Repeat – Select the desired reboot frequency.