Can I activate my phone number online?

Can I activate my phone number online?

Activate through your carrier’s website. If you’re activating a prepaid plan online, you will likely need to enter an Activation Code. This is typically included with your SIM purchase. If you don’t have one, you’ll need to call the number below for your carrier, or go into a retail store.

How do I activate my AT SIM card?

New phone or SIM card activation

  1. Go to att.com/getstartedbiz.
  2. Select Activate your device for AT wireless device.
  3. Enter the required information.
  4. Select Continue.
  5. Follow the prompts to complete your activation.

Can you activate AT SIM card online?

Go to Device Support. Choose your device. Scroll to Getting started and select Hardware & phone details. Choose Insert or remove SIM card and follow the steps.

How do I activate my new iPhone?

How to activate your iPhone

  1. Insert the SIM card you want to use into the tray and push it back into the phone.
  2. Turn on your iPhone by holding down the Power button until you see the Apple logo appear on the screen.
  3. Begin the setup process by following the on-screen instructions.

Can I activate my tmobile phone online?

To activate your new SIM card online, first insert your new SIM card and then go to the T-Mobile SIM website. Log in with your account credentials, or create an account if you do not yet have one by selecting Sign up for T-Mobile ID. Once you access your account, enter your phone number and your phone’s PIN.

How to activate portal in no mans Sky?

– Find a Monolith. Using the Signal Booster is the easiest way. – Activate the Monolith with the relevant trade commodity in your inventory. – Visit the portal and charge the Runes. – Talk to Travelers in space stations to get the locations of Unmarked Graves. – Visit the graves to get the Glyphs that match the Runes.

How do I activate the portal to the end?

Creation. In Survival mode,the player must venture to a stronghold to activate a pre-existing end portal,as end portal frame blocks cannot be obtained naturally.

  • Generation.
  • Behavior.
  • Sounds
  • Achievements.
  • Advancements.
  • History.
  • Trivia.
  • Gallery.
  • See also

    • How to deactivate a portal?

    Navigate to your settings and select Settings and Privacy. Then select Your Facebook Data. Then, under Deactivation and Deletion, select Deactivate Account. Finally, click Continue to Account Deactivation and then follow the onscreen instructions. To permanently delete your account, you must first locate the delete option.

    How do you activate Parent Portal?

    Portal has been replaced with a new parent portal application called ParentVUE. To access ParentVUE, parents will need to activate a new parent portal account. In order to activate your account, MCPS parents will receive an account activation letter that includes a unique Activation Key or URL necessary for setting up a ParentVUE account.

    https://www.youtube.com/watch?v=0O-roIogPTA

    How do you declare a global variable in C++ header file?

    How do you declare a global variable in C++ header file?

    The clean, reliable way to declare and define global variables is to use a header file to contain an extern declaration of the variable. The header is included by the one source file that defines the variable and by all the source files that reference the variable.

    Can I declare variables in header file?

    Yes. Although this is not necessarily recommended, it can be easily accomplished with the correct set of macros and a header file. Typically, you should declare variables in C files and create extern definitions for them in header files.

    Can I declare a global variable in main C++?

    To declare global variables in C++, we can declare variables after starting the program. Not inside any function or block. If we want to declare some variables that will be stored in some different file, then we can create one file, and store some variable.

    Can you initialize a variable in a header file C++?

    Variables should not be defined in header files, because the header file can be included in multiple source files, which would cause multiple definitions of the variable. The ANSI C standard will allow multiple external definitions, provided that there is only one initialization.

    What is a global variable in C++?

    Global variables are defined outside of all the functions, usually on top of the program. The global variables will hold their value throughout the lifetime of your program. A global variable can be accessed by any function.

    What happens if we include a static global variable in a header file?

    Basically, each source file together with all included header files is a single translation unit. So If you have a static variable in a header file then it will be unique in each source file (translation unit) the header file is included in.

    What is static variable C++?

    C++ProgrammingServer Side Programming. A static variable is a variable that is declared using the keyword static. The space for the static variable is allocated only one time and this is used for the entirety of the program. Once this variable is declared, it exists till the program executes.

    How do you declare a global vector?

    How declare a global vector

    1. global V1.
    2. Vll=[floor(Vrefg); floor(Vrefh)];
    3. V1=Vll;

    How do you declare a global string in C++?

    Here is how this variable is declared in global.cpp #include #include “../global.h” std::string globalWord = “”; This is how I used it in my library #include “../global.h” string text = globalWord; Thanks. c++ variables global-variables scope.

    Does C++ have global variables?

    In C++, a global variable is defined as a variable that can be used or accessed from anywhere in the entire program, which is one of the scope types in any programming language.

    How do you use global variables in CPP?

    Global Variables They are declared at the top of the program outside all of the functions or blocks. Declaring global variables: Global variables are usually declared outside of all of the functions and blocks, at the top of the program. They can be accessed from any portion of the program.

    Who won the Mitsubishi Electric Championship?

    Who won the Mitsubishi Electric Championship?

    Steve Flesch
    — Steve Flesch rallied from four shots behind Sunday with a 7-under 65 for a one-shot victory in the Mitsubishi Electric Classic, his second title at the TPC Sugarloaf. Flesch also won this tournament in 2018, his only other win on the PGA TOUR Champions.

    Who won the senior golf tournament in Hawaii?

    Jimenez, the cigar-smoking, free-spirited Spaniard, birdied the par-4 18th hole in regulation for a 6-under 66 and then beat Steven Alker on the second playoff hole to win the season-opening Mitsubishi Electric Championship at Hualalai for the third time.

    Where is the Mitsubishi Electric golf tournament being played?

    Duluth, Georgia
    The tournament is played in Duluth, Georgia with the best players on the PGA Champions Tour, the best golfers that are transitioning from consistently playing on the PGA Tour and into the more senior tour.

    Where is the Mitsubishi Classic being held?

    TPC Sugarloaf
    The Mitsubishi Electric Classic is a golf tournament on the PGA Tour Champions in Georgia in the greater Atlanta area. It debuted nine years ago in 2013 as the “Greater Gwinnett Championship,” and has been played each year at TPC Sugarloaf in Duluth, a northeast suburb.

    Who won on the Champions Tour today?

    Steve Flesch wins Mitsubishi Electric Classic for second time on PGA Tour Champions.

    Why is Farmers Insurance Open ending on Saturday?

    The tournament has been shifted to a Wednesday through Saturday format to avoid a conflict with Sunday’s telecasts of the NFL conference championship games. The scheduled Saturday finish is the first on the PGA Tour since the 1996 Waste Management Phoenix Open.

    Who won the senior golf tournament this weekend?

    Jim Furyk overcame a rocky 3-over-par start to capture the 41st U.S. Senior Open by three strokes over Mike Weir and Retief Goosen at Omaha (Neb.) Country Club.

    Is Sugarloaf Country Club gated?

    Sugarloaf Country Club Amenities: 24 Hour Gated Community. 27 – Hole Greg Norman designed TPC Private Membership Golf Club.

    What does REE mean in The Revenant?

    What does REE mean in The Revenant?

    Arikara
    Hugh Glass (Leonardo DiCaprio) is one of a group of men finishing up a fur trapping expedition in the wilderness. They are attacked by Ree (Arikara) warriors. Whoosh!

    How violent is The Revenant?

    The Revenant is rated R by the MPAA for strong frontier combat and violence including gory images, a sexual assault, language and brief nudity. Violence: – Frequent explicit violence with blood and brutal detail. – Violent acts shown in realistic detail with blood and tissue damage.

    How was the bear scene filmed in The Revenant?

    Not surprisingly, the scene didn’t actually involve a real bear. But it did require a lot of CGI, of course, and a man pretending to be a bear. In fact, one of the movie’s stuntmen, Glenn Ennis, told Global News, “There was no bear ever on set.

    Why do they scalp people in The Revenant?

    Scalping survivors was “visual evidence” of an attack that could be seen by those around. While the exact intent is unknown, some believe it was a warning to others or a way to embarrass the afflicted.

    Is The Revenant safe for kids?

    Violent historical drama. Not for young kids.

    What is the review of the revenant?

    The Revenant review – gut-churningly brutal, beautiful storytelling. 5 / 5 stars 5 out of 5 stars. Birdman director Alejandro González Iñárritu’s new movie pitches Leonardo DiCaprio against nature, bears and Tom Hardy in a tale of revenge, retribution and primal violence.

    Is the revenant the hottest blockbuster of the season?

    This isn’t Raqqa, though, it’s The Revenant: the hottest blockbuster of the season, winner of three Golden Globes a week ago, nominated for 12 Oscars last Thursday and yours for around £10-£15 this weekend at your local multiplex.

    Was Leonardo DiCaprio raped in the revenant?

    The film is based on a true story of the American frontier from 1823 and I’ll summarise the plot for you: man seeks revenge, man gets revenge. That’s it, basically, for two and a half hours, though there is a brief reprieve when you get to see Leonardo DiCaprio being mauled by a grizzly bear. Early reports suggested that he was raped.

    Are there any castles in North America?

    Are there any castles in North America?

    While fairytale castles may be associated more with Medieval Europe, the USA is home to many beautiful châteaux, mansions and palaces – you just need to know where to find them. We round up the most enchanting castles in America, from Hearst Castle in California to the grand Biltmore Estate in North Carolina.

    Where is the only full sized castle in North America?

    Toronto’s Casa Loma is the only real full-size castle in a North American city. full-size castle. When Casa Loma was constructed it was North America’s largest private residence.

    What is the only castle in North America?

    However, there is one structure on the North American continent that can truly claim to be a castle, Chapultepec Castle in Mexico City. Chapultepec has the rather dubious distinction of being the only castle within North America to ever house actual sovereigns.

    Is Casa Loma the only castle in North America?

    North America’s only castle, Casa Loma, is a Gothic Revival style house and gardens in midtown Toronto, Canada, that is now a museum and landmark.

    What is the oldest castle in America?

    Bacon’s Castle
    using a new exterior cell phone tour! Bacon’s Castle is the oldest brick dwelling in North America and was built for Arthur Allen and his family in 1665.

    What is the largest medieval castle?

    Malbork Castle Zamek
    The castle is a classic example of a medieval fortress and, on its completion in 1406, was the world’s largest brick castle….Malbork Castle.

    Malbork Castle Zamek w Malborku
    Built 13th century
    UNESCO World Heritage Site
    Official name Castle of the Teutonic Order in Malbork
    Type Cultural

    What is the largest castle in the United States?

    Biltmore Estate, Asheville, North Carolina With a square footage measuring more than 178,000 square feet, the Biltmore Estate is considered the largest privately owned home in the United States.

    What is the oldest castle in the United States?

    Why is Toronto called the 6ix?

    Yes, the second “t” is silent. “The 6ix” is a branded version of Toronto that Drake created, and we’ve gotta hand it to him, it’s stuck. The term is derived from the first official area code for Toronto, which was 416. Drake once told Jimmy Fallon that he was debating on calling it the 4, but later decided on the 6ix.

    What is the largest castle in the US?

    San Francisco Armory,locally known simply as The Armory,Mission District,San Francisco,built from 1912 to 1914.

  • Scotty’s Castle,Grapevine Mountains,Death Valley,California,built from 1922 to 1931.
  • Searles Castle,Great Barrington,Massachusetts,completed 1883.

    • What is the oldest castle in the US?

    Boldt Castle,New York,USA.

  • Dunrobin Castle,Scotland.
  • Castillo de San Marcos,Florida,USA.
  • Alcazar of Segovia,Spain.
  • Krak des Chevaliers,Syria.
  • Reichsburg Cochem,Germany.
  • De Haar Castle,Netherlands.
  • The Castle of Good Hope,South Africa.
  • Castillo San Felipe del Morro,Puerto Rico.
  • Portchester Castle,UK.

    • What is the best Castle in the world?

    Neuschwanstein Castle//Germany.

  • Hohenschwangau Castle//Germany.
  • Favorite Palace//Germany.
  • Burg Castle//Germany.
  • Imperial Palace (Hofburg)//Austria.
  • Clam Castle//Austria.
  • Hohenwerfen Castle//Austria.
  • The Palace of Versailles//France.
  • Château de Chantilly//France.
  • Frederiksborg Castle//Denmark.

    • How big is the biggest castle?

    The striking Neuschwanstein Castle overlooks the village of Hohenschwangau in southwest Bavaria. Ranking as one of the biggest castles in the world, it spreads out over 6,000 square meters. Ludwig II of Bavaria commissioned the castle in honor of music composer, Richard Wagner. Ludwig paid for it out of his own pocket.

    How many quarts is a 13×9 baking dish?

    How many quarts is a 13×9 baking dish?

    3 3/4 quarts
    How Many Quarts Are in a 9×13 Pan? Assuming the 9 by 13 inch pan has sides about 2 inches high, it can hold a volume of 14 to 15 cups. Since there are 4 cups in 1 quart, the pan holds between 3 1/2 and 3 3/4 quarts.

    Is a 9×13 pan 2 quarts?

    Is a 9×13 dish 2 quarts? To know the answer to this, you must first understand that there are four cups in a single quart. A 9×13 pan can hold between 3 ½ and 3 ¾ quarts. Therefore, a 9×13 dish can hold two quartz but is not necessarily a 2-quart baking dish.

    Is a 9×13 baking dish 3 quarts?

    The average 9×13 rectangular baking dish holds three quarts. Recipes that cook in a three-quart dish or Dutch oven can be cooked interchangeably in a 9×13 baking dish.

    How many quarts is a Pyrex 9×13?

    3 Quart
    Amazon.com: Pyrex Basics 3 Quart Oblong Glass Baking Dish, Clear 9 x 13 inch (Set of 2): Home & Kitchen.

    Is 3 at the same as 9×13?

    It might be a little different, but the point is, it’s incredibly versatile. And if you don’t already have a 3-quart baking dish, you should buy one as soon as possible. This baking dish—also sometimes identified by its dimensions, 13″x9″—is a kitchen essential that gives you real bang for your buck.

    What size pan holds 2 quarts?

    8-inch square cake pan
    Casserole Dish Substitutions

    CASSEROLE SIZE BAKING-PAN SUBSTITUTE
    2 quarts 8-inch square cake pan
    2½ quarts 9-inch square cake pan
    3 quarts 13x9x2-inch cake pan
    4 quarts 14x10x2-inch cake pan

    What size pan is 2 quarts?

    What does a 2 quart pan look like?

    The typical two-quart casserole dish is 8 inches wide by 8 inches long and 2 inches deep. These dimensions hold the exact two-quart volume needed for many casserole recipes. A rectangular casserole dish that is 11.1 inches long by 7.1 inches wide by 1.7 inches high also holds two quarts.

    How large is a 3 quart baking dish?

    And if you don’t already have a 3-quart baking dish, you should buy one as soon as possible. This baking dish—also sometimes identified by its dimensions, 13″x9″—is a kitchen essential that gives you real bang for your buck.

    How many liters is a 9×13?

    Do this by filling the pan with water all the way to the top—a true 13×9 pan should hold about 14 cups or 3.3 liters of liquid.

    What size baking dish is 4 quarts?

    14x10x2-inch

    How many quarts in a 9×13 Pan?

    Here is a point of how many quarts in 9×13 pan. It also depends on the size and height of the walls of the pan. The quarts in 9 x 13 pan having walls of height 2 inches, this pan can hold or keep 14 to 15 cups of volume inside it. Professional chefs who deal in baking are more conscious about correct measurements.

    How many quarts are in a gallon?

    Quarts is defined as a unit equal to a quarter of a gallon or two pints. In Britain, one quart is approximately equal to 1.13 liters, and in the United States, it is equivalent to 0.94 liters around. Some countries have set their standards.

    What is a good substitute for a 9×13 Pan?

    The most simple substitution for 9×13 pan is 8 square equal to 9 round pan. You can make bar recipes in shallower pans because some bars don’t rise so high.

    How many liters are in a quart?

    In Britain, one quart is approximately equal to 1.13 liters, and in the United States, it is equivalent to 0.94 liters around. Some countries have set their standards. Whenever you buy a pan or baking dish, you should do proper research about the size.

    How long is a 5 minute monologue?

    How long is a 5 minute monologue?

    Although pacing varies, a 5-minute speech is roughly 750 words. Publication coach Daphne Gray-Grant says that the average person speaks about 125-150 words per minute—meaning 5 minutes of talking would entail about 625-750 words.

    How many pages is a 4 minute speech?

    It takes most people between four to five minutes to read two pages of double-spaced twelve point font, so if your entire talk is a little shy of two full pages, you should be on track. Many people write one paragraph for their introduction, and one paragraph for their conclusion.

    What are some good monologues?

    “Orphans” by Lyle Kessler. Monologue: “I SAID I JUST NOW SEEN A FRIEND OF YOURS!

  • “Maricela de La Luz Lights the World” by Jose Rivera.
  • “The Foreigner” by Larry Shue. Monologue: “Don’t tell me you’ve never seen a knife….
  • “Between Riverside and Crazy” by Stephen Adly Guirgis.
  • “Mr.

    • What are some famous monologues?

    Romeo and Juliet

  • Macbeth
  • Richard II
  • Love’s Labour Lost
  • Julius Caesar
  • Much Ado About Nothing
  • Agamemnon
  • The Misanthrope
  • Death of a Salesman
  • Lysistrata

    • How to write a monologue with examples?

    – Create an outline that includes a beginning, middle, and end for the monologue. Note what will occur in each stage of the monologue. – For example, you may write: “Beginning: Elena the mute speaks. – Alternatively, write the first and last lines of the monologue, then create the content between them to generate ideas and thoughts for the monologue.

    What are some examples of monologues?

    Elizabeth Barrett Browning,‘ The Runaway Slave at Pilgrim’s Point ’. Our wounds are different.

  • Alfred,Lord Tennyson,‘ Ulysses ’. Vext the dim sea: I am become a name…Writers of dramatic monologues have often turned to mythical characters for their subjects
  • Robert Browning,‘ Porphyria’s Lover ’.
  • T.
  • H.
  • Elizabeth Bishop,‘ Crusoe in England ’.

    • What is the role of consultant in project management?

    What is the role of consultant in project management?

    Project consultants contribute their operational, strategic, or technical expertise to projects. They collaborate with clients to determine project parameters, develop project plans in line with business objectives, and assign project tasks and resources.

    What is the main role of a consultant?

    Consultants offer advice and expertise to organisations to help them improve their business performance in terms of operations, profitability, management, structure and strategy. Although the workload can be heavy, consulting is a sociable profession with plenty of networking opportunities.

    Is consultant a project manager?

    Project consultants differ from project managers in that project consultants often work for many businesses throughout their careers, assisting one business with a specific project before moving on to another, whereas project managers are permanent employees of a single business.

    Why are consultants important?

    Consultants provide a useful distance from business challenges; they are not emotionally invested in operations in the same way that business owners are, and they can more easily identify and address challenges, whether the issue is implementing a new technology or completing a merger or acquisition.

    How do you manage a consultant?

    Eight Steps to Consultancy Success

    1. Build a balanced relationship.
    2. Clarify the role.
    3. Define direction.
    4. Practice scope control.
    5. Get them up and running quickly.
    6. Cement trust with the team.
    7. Provide feedback.
    8. Be vigilant.

    Can project managers become consultants?

    A project manager develops skills, knowledge, and experience through years of hard work. After becoming a consultant, the project manager can offer that hard-won experience and skill to others. Consultants are in charge of scheduling their own time, and setting their own rates.

    What does a project consultant do?

    Researching internal knowledge database (in McKinsey,this called PD)

  • Researching the internet
  • Studying reports by independent parties (e.g: Nielsen,..)
  • Interviewing experts
  • Interviewing clients
  • Interviewing customers
  • Mystery shopping (the method of pretending to be a customer and experience competitor’s products and services)
  • Data analyzing
  • Surveying
  • ….

    • What is a project consultant?

    Time and money are gained or lost every day at the project level.

  • A proven track record.
  • TCGen’s Agile approach includes….
  • TCGen’s Project Management consulting expertise addresses a range of problems….

    • How much do project management consultants make?

    These charts show the average base salary (core compensation), as well as the average total cash compensation for the job of Project Management Consultant in the United States. The base salary for Project Management Consultant ranges from $77,878 to $97,412 with the average base salary of $87,177.

    What is project consulting?

    Working as a project consultant typically means that an individual will assist in the completion of a project from beginning to end. It’s up to him to provide his knowledge and expertise throughout all stages to ensure the best possible results.

    How do you detect adulteration in milk?

    How do you detect adulteration in milk?

    Testing Method: Put a drop of milk on a polished slanting surface. Pure milk either stays or flows slowly leaving a white trail behind. Milk adulterated with water will flow immediately without leaving a mark.

    What is the adulteration of milk?

    Some of the major adulterants in milk having serious adverse health effect are urea, formalin, detergents, ammonium sulphate, boric acid, caustic soda, benzoic acid, salicylic acid, hydrogen peroxide, sugars and melamine.

    Which device is used to detect adulterants in milk?

    Fluorometer: It is a device used to measure parameters of visible spectrum fluorescence i.e. intensity and wavelength. The fluorometer can be used to detect biomolecules and proteins using the copper nanoparticles. The device can also be modified to detect other substances such as lead and mercury.

    What is adulteration detection?

    One of the major challenges of urine drug testing is adulteration, a practice involving manipulation of a urine specimen with chemical adulterants to produce a false negative test result. This problem is compounded by the number of easily obtained chemicals that can effectively adulterate a urine specimen.

    What is milk testing?

    The Milk Quality area tests samples for the presence of bacteria, inhibitory substances, foreign matter and undesirable odours. These tests help to define the quality of your sample. The total bacterial count and sensory tests form part of the mandatory test requirement for any dairy producer.

    How check milk is pure or not?

    To check, put a drop of milk on your paw or any slanted surface and let it flow down. If the milk leaves a path behind, it’s not pure else its good. Starch in milk: If your vendor has added starch to milk, you’ll be able to find it by adding two tablespoons to salt (iodine) to 5 ml of milk.

    How can milk be tested for contamination?

    Boil a small amount of milk in a spoon, test tube or other suitable container. If there is clotting, coagulation or precipitation, the milk has failed the test. Heavy contamination in freshly drawn milk cannot be detected, when the acidity is below 0.20-0.26% Lactic acid. The test is quick and simple.

    What are the types of adulteration?

    Types of adulterants

    Type Substances Added
    Intentional Adulterants Sand, marble chips, stones, mud, other filth, talc, chalk powder, water, mineral oil and harmful colour.
    Incidental adulterants Pesticide residues, droppings of rodents, larvae in foods.

    How do you test milk?

    What is the organoleptic tests of milk?

    The organoleptic test permits rapid segregation of poor quality milk at the milk receiving platform. No equipment is required, but the milk grader must have good sense of sight, smell and taste. The result of the test is obtained instantly, and the cost of the test are low.

    Why is milk tested?

    Milk samples are tested for the amount and types of bacteria in them. All milk (all food, really) has some bacteria in it. This is why pasteurization of milk is so important. If the samples have too many bacteria, they are discarded.

    Did Jabba the Hutt Do Princess Leia?

    Did Jabba the Hutt Do Princess Leia?

    Jabba the Hutt never had sex with Leia or any other slave girl in his palace because he was and had always been in love with Han Solo.

    What does Jabba do to Princess Leia?

    When Jabba Desilijic Tiure captured Princess Leia Organa at his palace, he forced her to wear a dancing-girl costume and a chain. She strangled him to death with that chain, then exploded his sail barge as she escaped.

    Why did Jabba dress Leia?

    According to the narrative, Leia dresses as a man to fool Jabba and rescue Han, and then dresses in the bikini because she’s forced to by Jabba. But you could also see the story as a sublimated reaction to Leia’s emotional and sexual awakening.

    Who saves Princess Leia from Jabba?

    It occurred when Luke Skywalker, Obi-Wan Kenobi, Han Solo, Chewbacca, C-3PO, and R2-D2, aboard the freighter Millennium Falcon, rescued Princess Leia Organa from the Galactic Empire’s first Death Star.

    Who kidnapped Princess Leia in Star Wars?

    Introduced in the original 1977 film Star Wars, Princess Leia Organa of Alderaan is a member of the Imperial Senate. She is captured by Darth Vader (portrayed by David Prowse, voiced by James Earl Jones) on board the ship Tantive IV, where she is acting as a spy for the Rebel Alliance.

    Why was Lando wearing Han’s clothes?

    Lando wears Han’s clothes for several reasons — it makes sense in his new position as a Rebel, it may harken back to his time in the Correllian military, and it’s just practical filmmaking.

    Are there any female Hutts?

    Hutts are hermaphrodites with either male or female personalities, appetites and appearances. They are dominantly male or female in biology. Both ‘males’ and ‘females’ gestate offspring and have both sex organs.

    Is it true that Jabba pawed Princess Leia?

    Absolutely. There is no doubt that Jabba pawed, fondled, pinched, prodded and slobbered on Princess Leia. He’s the Dov Charney of a galaxy far, far away. Jabba surrounded himself with a plethora of beautiful, weak-minded aliens who were forced to act as if he doesn’t look like a greasy turd.

    Why did Jabba let Leia sit up?

    Certain that he had taught her an important lesson in obedience, Jabba allowed the princess to sit up, but still kept her on a short tether. As Leia finally gulped fresh air back into her aching lungs, the Hutt began to stroke her hair and shoulder to try to console himself over the rancor’s demise.

    Why did the Hutts want to kidnap Leia?

    Thousands of years ago on Nal Hutta, ancient Hutt tribes would kidnap beautiful females like Leia and force them into sexual slavery. As a result, certain Hutts developed an evolutionary lust for beautiful humanoid females.

    How did Lea enter Jabbas throne room?

    Leia was terrified of what was to come when her torture rack was attached to the lift that was to lower her into Jabbas throne room. The guard said “Send her down!” and an opening appeared below her. Suddenly, the device she was attached to began to descend into the room below. As she entered, people shouted and jeered at her over the band.