What are the disadvantages of paperless drywall?
Paperless Cons
- More expensive.
- Fiberglass particles tend to irritate skin, nose, eyes and throat during installation.
- Not as easy to repair damaged boards.
- Extra skim coat of joint compound is often needed to smooth out the rough fiberglass surface on the finished wall side.
- Not as widely available.
What is DensArmor drywall?
DensArmor Plus® Interior Panels have fiberglass mats for superior mould and moisture resistance compared to paper-faced drywall. Fiberglass mats, instead of paper facings, eliminate a potential food source for mould growth and may reduce remediation and scheduling delays associated with paper-faced drywall.
What is paperless drywall also known as?
Synopsis: For walls in damp environments, such as bathrooms, kitchens, and basements, paperless (or fiberglass-faced) drywall is a good alternative to the traditional paper-faced material.
What is DensArmor used for?
Primary Uses They are designed for direct attachment with screws or nails to wood and metal framing or existing surfaces. They may be used as a covering material for flat or curved structures. DensArmor Plus Panels are manufactured with fiberglass mat surfaces.
What are the advantages of using paperless drywall?
Paperless drywall is durable, too; it’s designed to resist warping, water absorption, and delamination, and it’s more abuse resistant than paper-faced drywall. Paperless gypsum panels are noncombustible, with zero smoke and zero flame spread development.
Where is paperless drywall used?
Paperless drywall can be used in any area where standard drywall can be used, and it is recommended by manufacturers for use especially in areas where higher moisture levels could raise concerns about mold.
Is DensArmor plus waterproof?
DensArmor Plus panels are GreenGuard Indoor Air Quality Certified® and have been listed as microbial resistant by the GreenGuard Environmental Institute. StoGuard® is a waterproof air barrier assembly that protects backup construction (sheathing and CMU) from moisture intrusion and air leakage.
Is DensArmor plus fire rated?
DensArmor Plus Fireguard exhibits 15 flame spread as tested per ASTM E 84 or CAN/ULC S-102. A specially formulated gypsum core that includes glass fibers allows DensArmor Plus Fireguard to help protect framing members and prevent or delay the spread of fire.
What are the advantages of paperless drywall?
What type of drywall should be used in a garage?
The most commonly used drywall for garages are standard ½ inch panels. The exception is ceilings that need ⅝ panels. Also, for attached garages, you’ll need to use ⅝ panels or type X rated drywall on the wall that connects the house to the garage.
What is blue sheetrock for?
Blue Board Drywall Blue board is used for veneer plastering, and the surface paper has special absorption qualities. It has a high water and mold resistance and there are fewer steps involved in veneer plastering. Blue board drywall is not made for mud, tape, or paint.
What is densarmor plus drywall?
DensArmor Plus is a new generation paperless drywall designed as a replacement for paper-faced drywall for building interiors. DensArmor Plus drywall incorporates glass mats on the surfaces of the drywall panel instead of paper facings found on traditional drywall.
What are the minimum dimensions for densarmor plus panels?
Framing shall be not more than 16″ (406mm) on center for 1/2″ (12.7mm) thick DensArmor Plus panels and not more than 24″ (610mm) on center for 5/8″ (15.9mm) thick DensArmor Plus panels. Suitable fascia and moulding shall be provided around the perimeter to protect the DensArmor Plus panels from direct exposure to water.
Can densarmor plus be used with veneer plaster?
Where DensArmor Plus is to receive a veneer plaster, longer working or open time as well as longer drying times can be expected due to the superior moisture resistance properties of DensArmor Plus. Veneer plasters adhere well to DensArmor Plus.
What is paperless interior gypsum drywall?
Finally the innovative, paperless interior gypsum drywall you have waited for! This interior wallboard panel replaces the paper facings found in traditional wallboard with fiberglass facings.