What does vacuum condenser mean on Sub-Zero refrigerator?
The “Vacuum Condenser” message appears when the unit is not running efficiently or temperatures are too high. This can be due to a dirty condenser, a door sealing issue, or a problem with the unit. If temperatures are high, call for Factory Certified Service.
How do you clean a Sub-Zero 632 condenser?
Answer:
- Turn the unit off at the control panel Unit On/Off button or turn the control dial down past 1.
- Open the doors and remove the louvered grille or grille panel.
- Use a soft bristle brush attachment on a vacuum to remove dust and lint from the condenser area.
- Turn the unit on and monitor temperatures.
How do you clean a vacuum condenser?
First pull out on the bottom edge of the grill and tilt forward. Then using a soft bristle brush vacuum to remove dust and lint from the condenser. To avoid bending the condenser fins be sure to vacuum in the direction of the fins up and down.
What temp should Sub-Zero freezer be?
What is the Ideal Temperature in a Sub-Zero Freezer & Refrigerator? The best temperature for your Sub-Zero refrigerator is 38 degrees Fahrenheit and the freezer should be set to 0 degrees.
Where is the condenser on my Sub-Zero fridge?
On Sub-Zero refrigerators the condenser coils are located on the top of the unit behind the large grille, and can be easily accessed by simply lifting the grille up to expose the condenser coils.
Where is the compressor on a Sub-Zero refrigerator?
In most Sub-Zero 500 Series fridges the compressor is located at the top part of the refrigerator, behind a grill. Carefully unhinge and remove the grill and then the cover. Depending on the model, you may see two compressors – for the freezer and for the refrigerator.
How do you remove a Sub-Zero compressor cover?
No tools are required to remove the grille. To remove, lift straight up, pull the bottom edge of the grille out, and pull down to release from its mounting bracket.
How do I make my Sub-Zero freezer colder?
Adjust the Temperature
- Press the colder or warmer key for the desired refrigerator or freezer section. Unit normally shows the actual temperature.
- After setting to desired temperature, display will return to actual temperature after 3 seconds.
- The temperature change is not immediate.
Why is my Sub-Zero not cold?
If you have a Sub-Zero refrigerator not getting cold, the temperature setting may be too high. For proper cooling, your refrigerator’s electronic temperature control should be set at 38°F. Your freezer should be set to 0°F or your Sub Zero ice maker won’t make ice.
Where is the condenser coil on a refrigerator?
Condenser coils are located on the back of the fridge or across the bottom. These coils cool and condense the refrigerant. When the coils are clogged with dirt and dust, they can’t efficiently release heat.