What is the largest concrete pump?
Cifa-Zoomlion has received the Guinness World Record for the tallest concrete pump, with a boom of 101m. It topples the previous record of 86m, held by Zoomlion’s rival in the concrete pump industry, Sany. Prior to that pump, Zoomlion had been the holder of the record, for an 80m pump.
How far does a 47 meter concrete pump reach?
Boom Specifications
| Vertical Reach | 46.5 m (152’7”) |
|---|---|
| Reach from Front -Cabover | 39.5 m (129’7″) |
| Unfolding Height | 10 m (32’10”) |
| 1st Section Length | 9.3 m (30’6”) |
| 2nd Section Length | 7.8 m (25’7”) |
How far can a concrete pump?
A line pump usually reaches 150 meters, with additional flexible piping available. Boom pumps can reach around 72 meters when fully extended – with additional extensions also available.
What is the biggest concrete pump truck?
With a 70 m vertical reach, Putzmeister’s M 70-5 is the biggest truck-mounted concrete placing boom in the world. Putzmeister is celebrating its 50th anniversary in style with the launch of the largest concrete truck pump in the world, the 70 m vertical reach M 70-5.
What is a concrete line pump?
A concrete line pump is a long hose attached to a stationary pump mounted on a trailer. This hose allows you to more easily direct the concrete pour and is great for horizontal pumping, as you can extend the hose virtually as long as you need it.
What type of pump is best for concrete?
boom concrete pump
A boom or truck mounted concrete pump is best suitable for the construction of huge road and highway projects. For concrete pouring at several altitudes, where there is a limited area for the concrete pouring, a boom concrete pump is the best choice.
What is the reach of a concrete pump truck?
How far can a concrete pump truck reach? The vertical reach of a typical boom pump is 41.9 metres (137 feet). And the horizontal reach is 38 metres (124.7 feet). However, longer booms can reach more than 200 feet.
How wide is a standard concrete truck?
-Rear Drive Rear Discharge Mixer 30-74000lbs, Minimum truck height 11’8″ (if requested) to 12′ 2″ Length of truck axle up 28-32 ft, 8 foot width(9 to clear) 19ft of chute. Max chute height 5 ft dependent on slump and length.
What is the capacity of a concrete truck?
around 8 cubic yards
Concrete trucks weigh an average of 25,000 lbs. by themselves and up to 40,000 lbs. when carrying a full load. Their capacity is around 8 cubic yards, but can be up to 10 cubic yards if fully-loaded.
What type of pump is used for concrete?
Stationary pumps: A stationary pump, or trailer-mounted pump, is the most basic form of concrete pump.
What are the major problems in using pumping for concreting works?
Major Problems in Concrete Pumping Works
- Blockage of Concrete Pump.
- Segregation and Bleeding in Concrete Mix.
- Concrete Mixture.
- Handling Concrete.
- Selection of Pumping Equipment.
- Use of Poor-Quality Materials.
- Selection of Improper Additives for Concrete.
- Failure to Maintain Pump Pipeline.
How fast is a concrete pump?
Ground line hydraulic pumps can shift concrete at 1m³ each minute and can extend to a distance of around 150 meters, in order to reach the pour site. This makes concrete pouring in awkward areas simple, as the pipes and hoses can go up, over and around obstacles.
What is the 61-meter?
In addition to the unit’s already compact outrigger footprint, the 61-Meter features Putzmeister’s One-Sided Support (OSS) system as standard, to further minimize the space required when pumping. A NEW STANDARD OF INNOVATION AND EXCELLENCE
What is the Putzmeister 61-meter?
In addition to the unit’s already compact outrigger footprint, the 61-Meter features Putzmeister’s One-Sided Support (OSS) system as standard, to further minimize the space required when pumping. A NEW STANDARD OF INNOVATION AND EXCELLENCE ERGONIC®SYSTEM BENEFITS ERGONIC GRAPHIC DISPLAY (EGD)
Why choose a 61-meter roll-and-fold boom?
LARGE ON REACH, SMART IN DESIGN Congested job sites are no match for the maneuverable, four-section Roll-and-Fold boom design of the 61-Meter. The boom’s well-designed layout of components incorporates fewer bends for easier service, a smoother concrete flow, a longer service life and greater parts commonality.