What is the latest IPC 610 revision?
IPC Releases New “H” Revision to Two Leading Standards for Electronics Assembly, IPC J-STD-001 and IPC-A-610
- Section 8 is all new – Cleaning and Residue Requirements.
- 1.56 µg/NaCI equivalence/cm2 value for resistivity of solvent extract (ROSE) – no longer acceptable basis for qualifying a manufacturing process.
What is the difference between J-STD-001 and IPC-A-610?
For example, IPC-A-610 specifies mandated criteria that should be used daily by board inspectors. The J-STD-001, on the other hand, provides the best practices that process engineers, supervisors and technicians should follow to achieve acceptable boards.
What is J IPC standard?
IPC J-STD-001, Requirements for Soldered Electrical and Electronic Assemblies, has emerged as the preeminent authority for electronics assembly manufacturing worldwide. The standard describes materials, methods and verification criteria for producing high-quality soldered leaded and lead-free interconnections.
What is IPC-A-610 Class 3?
IPC-A-610 Class 3 The highest standard of the IPC classes is Class 3, which means an electronic assembly must be built in accordance with all of the IPC criteria. This will include laminate selection, plating thickness, material qualifications, manufacturing processes and inspection.
What are IPC 620 standards?
The IPC/WHMA-A-620 is a quality standard that describes the Requirements and Acceptance for Cable/Wire Harness Assemblies. It was created as a joint project of the Association Connecting Electronics Industries (IPC) and the Wire and Harness Manufacturers Association (WHMA).
What is IPC A-610 Class 3?
What is IPC 610 Class II?
IPC-A-610 Class 2 Class 2 of the IPC standards is typically the most requested for non-critical electronic assemblies where longer-term reliability is desirable, but perhaps not essential. Class 2 does still allow for a certain degree of imperfection.
What is J-STD-001 certification?
IPC J-STD-001 is an individual level certification based on a standard published by IPC titled “Requirements for Soldered Electrical and Electronic Assemblies”. The standard lists requirements for the manufacture of electrical and electronic assemblies and includes materials, methods and verification criteria.
What is IPC-A-610 revision E?
IPC-A-610 is invaluable for all inspectors, operators and trainers. Revision E has 809 photos and illustrations of acceptability criteria-165 of them new or updated. This revision has been critically reviewed for clarity and accuracy.
Who should get an IPC-A-610 certification?
Anyone responsible for the quality and reliability of electronic assemblies should consider becoming an IPC-A-610 Certified IPC Trainer. Trainers and quality supervisors versed in electronic assembly are excellent candidates for A-610 training, as are engineering and manufacturing supervisors with assembly responsibilities.
Is this revision to the IPC J-STD-001 document accurate?
This revision has been critically reviewed for clarity and accuracy. The document synchronizes to the requirements expressed in other industry consensus documents and is used with the material and process standard IPC J-STD-001.
What is the IPC-A-610 soldering criteria?
Purpose and application of IPC-A-610 Soldering criteria, including lead free connections Soldered requirements for connecting to terminals Soldered connection requirements for plated-through holes Surface mounting criteria for chip components, leadless and leaded chip carriers