Vivu.tv

Advices

Where can I find WWN in ESXi?

Where can I find WWN in ESXi?

2. How to find HBA WWN via ESXi Shell / CLI:

  1. Connect to ESXi shell either via putty/SSH or DCUI (Direct Console User Interface) / server console.
  2. Run ‘ls /proc/scsi/’ and check the folder names:
  3. Look for a folder like ‘qla2xxx’ – QLogic HBA, ‘lpfc820’ – Emulex HBA, ‘bnx2i” – Brocade HBA;
  4. Run ‘ls /proc/scsi/qla2xxx’.

Where is HBA in ESXi model?

Hello, as you probably know the only way to find out about HBA firmware and driver versions these days is by running:

  1. /usr/lib/vmware/vmkmgmt_keyval/vmkmgmt_keyval -d to see which are the HBA devices, then.
  2. /usr/lib/vmware/vmkmgmt_keyval/vmkmgmt_keyval -l -i vmhba1/qlogic to actually retrieve the needed info for a hba.

How do you check multipathing on ESXi host?

Obtain multipath settings for your storage in the vSphere Client:

  1. Select an ESX or ESXi host in the vSphere Client and click the Configuration tab.
  2. Click Storage.
  3. Select a datastore or mapped LUN.
  4. Click Properties.
  5. In the Properties dialog box, select the desired extent, if necessary.

How will you identify the LUN on ESXi server?

The maximum number of LUNs is 256 and the format is /dev/disks/naa. xxxx . You can trace the storage system from the VMware ESXi/ESX server through the following layers: Host adapter level – The host adapter driver provides the list of LUNs that are detected for each Fibre Channel port.

Where are VMS stored on ESXi?

On ESX/ESXi hosts, virtual machine disk (VMDK) files are located under one of the /vmfs/volumes, perhaps on shared storage. Storage volumes are visible from the vSphere Client, in the inventory for hosts and clusters. Typical names are datastore1 and datastore2.

Where is the WWN number on a Linux virtual machine?

HBA card wwn number can be manually identified by filtering the associated files under the “/sys” file system. The files under sysfs provide information about devices, kernel modules, filesystems, and other kernel components, which are typically mounted automatically by the system at /sys.

How do I know if VIB is used?

To determine which drivers are installed:

  1. In ESXi 5.x, run this command: esxcli software vib list | less.
  2. In ESXi 4.x, run this command: esxupdate query –vib-view | less.

How do I find my ESXi network adapter?

Check the current status of the vmnic from either the VMware vSphere Client or the ESXi service console:

  1. To check the status from the vSphere Client: Select the ESX host and click the Configuration tab. Click Networking.
  2. To check the status from the ESXi service console, run this command: esxcli network nic list.

How do I find my NAA ID for Datastore?

Now select any host and navigate to Configure -> Storage Devices -> Click on any Device under the Storage Devices tab. This will provide you information about datastore’s NAA ID and LUN ID.

What is Esxcli command?

The ESXCLI command set allows you to run common system administration commands against vSphere systems from an administration server of your choice. The actual list of commands depends on the system that you are running on. Run esxcli –help for a list of commands on your system.

How do I find my LUN ID for Datastore?

  1. In vSphere, select the host configuration tab, storage.
  2. Select the Devices View.
  3. Sort by LUN # and locate the LUN you want to verify.
  4. Right click the LUN in the Devices list and select “Copy identifier to clipboard”
  5. Copy the converted string and paste to a work note.

What format does ESXi use?

VMDK

Filename extension .vmdk
Developed by VMware
Latest release 5.0 December 20, 2011
Type of format Disk image file
Website code.vmware.com/web/sdk/6.7/vddk

How to install VMware ESXi 5 step by step?

Step 1: The VMware ESXi Hypervisor boot menu. Step 2: Installation starts automatically. Step 3: The progress of booting is shown. Step 4: Confirm the Welcome screen by pressing Enter. Step 5: EULA License (press F11), the available devices will be scanned afterwards. Step 6: Select the installation disk. Pressing F1 will display details about

How to enable SSH remote access on VMware ESXi 5?

Load the DCUI screen and press F2 to log in. For example,Bare Metal Cloud customers use the Remote Console via the BMC portal.

  • Enter the root password. For phoenixNAP BMC servers,the root password appeared when you deployed your ESXi server.
  • Navigate to Troubleshooting Options and hit Enter.

    • How do I patch ESXi 5?

    Requirements. For this demo,I’ll be using WinSCP.

  • Installing a patch. There are 6 steps to installing patches on ESXi.
  • Upgrading ESXi using an offline bundle.
  • Conclusion.
  • 26 thoughts on “Patching and Upgrading ESXi using ESXCLI commands”

    • How to install VIB on VMware ESXi?

    In general,VIB has 3 parts: File Archive – the main file. The file which gets deployed to the ESXi host.

  • Use CLI to update your ESXi host: Previously each time there was a new release of VMware ESXi,then there was a new release of VMware tools.
  • More from ESX Virtualization: What is VMware Memory Ballooning? What is VMware vMotion?

    • By Naveed Callahan

    You Missed