How do you open a push flush cistern?

1 Answer from a MyBuilder Bathroom Fitter a) Push one button down, then put you finger under the other button and pop it out, then pop the other button out. When both buttons have been removed, there is usually a plastic pozi head screw to undo. Remove the screw and it will all come apart.

How do you remove a dual flush toilet cistern?

Push one button down all the way and keep it down (the toilet will flush). Turn your finger so that your fingernail engages with the side of the other button. Both buttons have a finger nail notch on the side. Dig your nail into the notch and pull out the button.

Which is the short flush button?

The dual flush button allows the user to control the waste water. The smaller button (half flush) delivers a smaller volume of water than the larger button (full flush).

How do you remove a toilet flush plate?

Here’s how to access a concealed toilet cistern:

1. Locate the toilet cistern’s push button.
2. Slightly lift the cover plate and remove it.
3. Carefully remove the flushing rods located at the centre of the concealed cistern frame.
4. Unfasten any plastic bolts manually to release the frame.

What are the 2 buttons on top of toilet?

They feature two different buttons to perform two different kinds of flushes. The difference in buttons depends on the waste in the toilet. One button for liquid waste, another for solid waste. According to studies, this system can help save up to 67 percent of water used to flush, and in return, saves you money.

How do I remove a flush valve nut?

The Bottom Line

1. Step 1: Close the water supply line.
2. Step 2: Place a towel under the toilet tank.
3. Step 3: Take the lid off the top of the tank.
4. Step 4: Drain the water from the tank.
5. Step 5: Remove the plastic coupling.
6. Step 6: Unscrew the nut by turning it clockwise.

How do you replace a toilet valve?

How to Replace a Toilet Shut-Off Valve

1. STEP 1: Cut the water supply.
2. STEP 2: Drain the water lines.
3. STEP 3: Disconnect the supply line.
4. STEP 4: Remove the old toilet shut-off valve.
5. STEP 5: Install the new shut-off valve.
6. STEP 6: Attach the toilet supply line.
7. STEP 7: Turn on the water.