Are Penco guitars good?
The Penco brand was of relatively high quality. Their acoustics were usually but not always made with laminated back and sides and often laminated tops. Penco made Martin and Gibson style acoustic guitars.
What is an adjustable saddle on a guitar?
If the strings are too high or too low, you have to adjust the action. To adjust the action, you need to raise or lower a part of the bridge known as the saddles (the parts just in front of the bridge where the strings sit). You raise or lower the saddle by turning the hex screws with a tine hex wrench.
How high should a guitar saddle be?
It is suggested that the saddle should be placed exactly twice as far from the nut as the 12th fret, based on the simple math of fret scales.
Where is Penco made?
In the 1950’s, the name was shortened to Penco Products and the plant and offices were expanded to a modern facility in Oaks, Pennsylvania, near Valley Forge, PA. In 1994 the company added a manufacturing plant in Salt Lake City, Utah, which now serves as our Center for Design Excellence.
Which way do I move my saddle for intonation?
Setting the intonation on a guitar basically involves moving the saddles forward or backwards until all of the notes all of the way up the fret board play as in tune as possible.
How high should the saddle be above the bridge?
Before you decide whether or not to make an adjustment you should also consider that your saddle must fit deep and snug in the slot without wiggle room, that the saddle top radius should match that of your fingerboard, and that the desired saddle height should probably not average less than 1/32 inch or more than 3/16 …
Who owns Penco?
3rd generation and current owners, Jeff Peterson and Scott Sapna, took over all daily operations. September 2017 marked the latest branch addition for Penco when a location was opened in Milford, DE.
Where are Penco lockers made?
Hamilton, NC
Penco’s Steel Lockers for a Wide range of Needs Penco Patriot Fully Framed lockers are manufactured in the United States at our 475,000 square foot facility in Hamilton, NC. Using modern metalworking equipment and a state-of-the-art powder coat paint system, Penco delivers outstanding quality with superior service.