Can you use 500k pots on a Strat?
The two most common pot values used in guitar circuits are 250k and 500k. 250k pots are commonly used in single coil pickup guitars ie. in a Strat or Tele, whilst 500k pots are generally used with humbucker pickups.
What happens if you use 500k pots on single coil pickups?
For the guitarist in search of the perfect tone, however, mixing humbuckers and single-coil pickups can present a real problem. With such a combination, choosing to go with the 500k pots can make your single-coils sound harsh and brittle. Going with the 250k pots can cause your humbuckers to sound dark and muddy.
Are 500k pots louder than 250K?
The rule is: Using higher value pots (500K) will give the guitar a brighter sound and lower value pots (250K) will give the guitar a slightly warmer sound. This is because higher value pots put less of a load on the pickups which prevents treble frequencies from “bleeding” to ground through the pot and being lost.
Can you use a 500k volume pot with a 250K tone pot?
You will achieve a tone brighter than a 250k pot but darker than a 500k. However, a change in pot value will affect the center frequency of your tone control and can result in a different sound while using it.
What do Orange Drop capacitors do?
The Orange Drop capacitor line introduced in the 60s heralded the capacitors of the modern era—with stability, resistance to temperature variation, low moisture absorption, excellent characteristics in AC circuits, no microphonics, and other desirable attributes.
Can I use 250K pots with humbuckers?
Traditional Humbuckers can sound dark and muddy through a 250K pot, and Single Coil Strat or Tele Pickups can sound shrill and “crispy” through a 500K pot. By choosing the correct pot value, we tailor our electronics to the pickup’s true voicing.
What pots does Fender use?
Most Fender-type guitars use split-shaft pots, meaning the shaft of the control has a slit down the middle.
https://www.youtube.com/watch?v=SJA3bL5mKJE