Can you use a long cage derailleur with 11 28?

Can you use a long cage derailleur with 11 28?

If he is running 11-34 and all is fine in small – small, then all will be fine in small – small with an 11- 28 the derailleur will not be under as much tension in 28 as 34, the chain can be shortened if you want to, but if it isn’t causing a problem in small – small with a 11 – 34 it won’t cause a problem with 11 – 28.

What is the max cassette for short cage derailleur?

All derailleurs have a maximum cassette size. This is often indicated as the maximum number of teeth that can be on the biggest cog (often referred to as low sprocket max in manuals). So when you see that a derailleur has a maximum cassette size of 30T you know that the biggest cog on the cassette cannot exceed 30T.

How do I know if my derailleur is long or short cage?

Shimano categorizes its rear derailleurs into three tiers depending on the cage length, and they’re denoted by the suffix on the model number. “-SS” refers to the short-cage versions, with a maximum chain capacity of 33T or less.

What’s the difference between long cage and medium cage derailleurs?

If you are in-between the capacity ranges of the two, which is often the case with mountain bikes, then note the following: long cage derailleurs will accommodate a wider gear range and deliver a better chain line, while medium cage derailleurs are less likely to be hit by rocks on the trail.

What is the difference between a short medium cage rear derailleur?

The only difference between the two is the amount of chain slack they can take up. In theory, the fact that the short RDs have a shorter cage means that the amount of movement is less due to the lower angle and lower flex.

Can I use 11 speed derailleur with 10 speed shifter?

Can An 11-speed Derailleur Work With a 10-speed Cassette and Shifter? Condensed Answer: Shimano’s 11-speed derailleurs have a different rear shift ratio than 10-speed derailleurs and are therefore not compatible with 10-speed indexed shifters.

Can I use a 11 speed cassette with a 10 speed derailleur?

No, that will not work. The shifts will not line up across the entire range, because an 11-speed cassette is not just a 10-speed cassette with an extra cog stuck on at the same spacing.

What is short cage and long cage difference?

A chain that slacks can be represented as the force acting on the lever (derailleur’s cage in our case) and puts tension on the spring. Long cage = easier to move / short cage = harder to move. If you use only one chainring you can use a short cage derailleur.