How do I adjust my Glidermatic GTS?
Press and hold the ‘UP ADJ’ button until the door travels to the desired open position. Press ‘Limit’ once to save this position in the units memory. Unit will beep twice to confirm. Repeating this process, press and hold the ‘DN ADJ’ button until the door reaches the desired close position.
How do you manually open the Glidermatic GTS?
To put the door into manual operation, pull down firmly on the red ball hanging from your operator whilst simultaniously lifting your door slightly. Your door can now be manually raised so that any trapped vehicles can be removed.
How do I reset my Glidermatic GTS garage door?
www.gliderol.com.au To erase all handsets from the memory, hold down the reciever button (shown in step 2) for 15 seconds. Any other handsets previously used will need to be reprogrammed.
How do you open a Glidermatic door manually?
To put the door into manual operation, flip the red manual release lever (located at the end of your roller door curtain) 90 degrees so that it is pointing toward you. Your door can now be manually operated.
How do I reset my Glidermatic Optima?
To erase all handsets from the memory, hold down the ‘Learn’ button (shown in step 2) for 15 seconds. Any other handsets previously used will need to be reprogrammed.
How do you set the limit on a Gliderol?
Set the top/open door limit by using the arrow (Up & Down) buttons on the operator (or the buttons on your Gliderol Handset) to raise the door to it’s open position. Press ‘Enter’ to confirm limit.
How do you program a Glidermatic garage remote?
How to program a Glidermatic GRD+ remote control handset.
- Press and hold the Enter button for 2 seconds to enter the programming mode You will hear 2 beeps.
- Press the arrow buttons to luminate the Learn mode in the programming menu.
- Press the Enter button to confirm.
- Press the top button on your remote control handset.
How do you manually lock a Gliderol garage door?
Putting a zip tie on the manual release latch is an excellent way to manually lock your Gliderol door. Garage door openers normally have an emergency release lever that helps to unlock the door during a power outage. However, thieves can use this method to gain unauthorised access to your garage.
How do I manually override my electric garage door?
Here are the steps to get your door opened without a problem:
- Door Must Be in Down Position.
- Pull the Emergency Release Cord.
- Manually Move the Garage Door and Return to Down Position.
- Pull the Emergency Release Cord Toward the Door.
- Re-connect the Trolley to the Opener Carriage.
How do you program a Gliderol remote?
Programming your Remote into the Opener
- Press and hold the “Enter” for two seconds to access the operator menu.
- Use the arrow keys to select the Learn option, and press enter. The unit will beep 3x.
- Press any button on the remote. The motor will beep once if successful.
- Allow 3 seconds for the unit to exit setup mode.
How do I reset my Gliderol GTS?
Take the cover off the control box. The raised mini circuit board to the top left of the board has a red/brown button located in the bottom right corner. Press and release this button, then press and hold the larger button on the handset, your handset should now operate your door. To reset any previous codes.