How do I configure a VLAN on a Dlink switch?

How do I configure a VLAN on a Dlink switch?

Configuration:

  1. Access the web interface of the unit using the default IP http://10.90.90.90 (Remem-ber to set a fixed IP in the same range on the computer).
  2. Enter the password “admin” default one.
  3. Once inside the configuration interface refer to “VLAN”.
  4. Inside VLAN you must activate asymmetric VLAN and then apply.

How do I create a VLAN interface in Windows 10?

  1. Go to Windows Device Manager.
  2. Open the properties of the port where you want to configure the VLAN.
  3. Go to the VLAN tab.
  4. Click the New button.
  5. Type the VLAN ID number into the VLAN ID box.
  6. Accept the VLAN name entered by default or type in a new name.
  7. Click OK.

How do I access my D Link manageable switch?

Step 3: Open a web browser and type in the address bar, type in the URL http://10.90.90.90 and press Enter on the keyboard. Click on Login at the top of the page. By default, there is no user name and password, click OK. You will now be logged into the Web Management Interface.

How do I assign a VLAN to a computer?

Configure VLANs in a Microsoft Windows Environment

  1. Click Control Panel.
  2. Click Network Connection.
  3. Click the folder icon from the sub-manual bar.
  4. Right-click the Sun Dual 10GbE SFP+ PCIe 2.0 Low Profile Adapter port, then select Properties.
  5. Click Configure.
  6. Click VLAN, then click on New.

How do I configure a manageable switch?

How to configure a network switch

  1. Step 1: Connect to the console.
  2. Step 2: Set a management IP and default gateway.
  3. Step 3: Set hostname and domain name.
  4. Step 4: Set logins on VTY lines and console port.
  5. Step 5: Set Privileged EXEC password.
  6. Step 6: Enable SSH.
  7. Step 7: Create VLANs.
  8. Step 8: Add access ports to a VLAN.

How do I log into my D-Link switch?

Type IP address 10.90. 90.90 in the WEB Browser of PC, you will then be asked to enter ID and Password so that you can log into the Switch device. The default ID is “admin”. The default Password is “admin”.

What is the difference between tag and untagged VLANs?

VLAN-enabled ports are generally categorized in one of two ways, tagged or untagged. These may also be referred to as “trunk” or “access” respectively. The purpose of a tagged or “trunked” port is to pass traffic for multiple VLAN’s, whereas an untagged or “access” port accepts traffic for only a single VLAN.

Do all D-Link switches support VLANs?

Not all the D-Link switches support VLAN. it is DGS-3100 48 Port switch. I think native vlan is just a Cisco term. A native vlan is simply a vlan that is untagged on a trunk port. Usually Cisco require this because management packets such as for spanning tree will need to be send without vlan tagging. Hope this helps,

How do I configure a VLAN?

Example Setup: • VLAN configuration Step 1 – Create the vlan Add the id vlan and click “Apply” – L2 Features > VLAN > 802.1Q VLAN CLI commands: vlan 10.

How to change the name of the VLAN?

Click “Edit” and change the name of the VLAN in the VLAN Name column, once changed the name pique at the end of the line Apply. 5-16 ports of each unit, where users will connect using the Access mode.

How many Static VLAN groups does the dgs-1100-05 support?

The DGS-1100-05 supports up to 32 Static VLAN Groups so that should be plenty for a small business network. Click here for more information on D-Link’s Web Smart Switches. Registration confirmation will be emailed to you.