How do I connect my Korg Volca keys to my computer?

The process is virtually identical for the Korg Volca Synths.

1. Connect a 3.5 mm to 1/4 inch adapter (such as this) to the headphones output of your Korg Volca.
2. Connect the 1/4 inch end into an input in your audio interface.
3. Plug the audio interface into your PC or laptop.

How do I change the MIDI channel on Korg Volca keys?

Setting the MIDI channel While holding down the MEMORY button, turn on the volca keys. 2. Keyboard buttons 1 to 16 correspond to the MIDI channels 1 to 16. Press the button that corresponds to the desired channel, and the LED below the keyboard button will light up.

How do I reset my Korg Volca keys?

To restore all sequence data to the factory defaults on your Korg Volca Beats, Bass, or Keys:

1. Hold FUNC and MEMORY while turning on your Volca module.
2. The REC and PLAY buttons will blink and the display will show Ld.Pr.
3. Press the REC button to restore factory defaults or press PLAY to cancel.

How do I connect my MIDI keyboard to Volca keys?

To set the midi channel of the Volca, hold down the memory key when starting it up. The touchplate keys will then let you select between midi channels 1-16 (first key is channel 1, second is 2, etc). Don’t know how to set the output channel on your Yamaha, but it should be covered in the manual.

How do I sync my Korg Volca to MIDI?

Syncing to an External MIDI Clock

1. While holding down the FUNC button, turn on your Volca module.
2. Press the Step 6 button.
3. When the LED is lit, this means the clock is set to Auto.
4. When you’re done, press the REC button.

How do I connect hardware synth to audio interface?

The quick steps for connecting a synth to your computer or laptop are:

1. Connect an audio interface to your laptop or PC using USB.
2. Connect a ¼” guitar lead to your audio interface.
3. Plug the cable into the ‘line output’ on the synth.
4. Open up your recording software or DAW.

How do you reset a Korg Volca drum?

Factory reset

1. Press and hold the FUNC and PLAY buttons while turning the unit on.
2. When the PLAY and REC buttons start flashing, press the PLAY button to perform the factory reset. Press the REC button to cancel.

How do I factory reset my Volca FM?

While holding down the FUNC and MEMORY buttons, turn the volca fm on. The • (REC) and ▶ (PLAY) buttons will blink. 2. Press the • (REC) button to restore the factory defaults and start volca fm.

How do I connect my Korg Volca to MIDI?

Connect a 3.5 mm to 1/4 inch adapter (such as this) to the headphones output of your Korg Volca. Connect the 1/4 inch end into an input in your audio interface. Plug the audio interface into your PC or laptop.