How do I delete an EFI entry?

How do I delete an EFI entry?

To delete old EFI entries, open an elevated Command Prompt, type bcdedit /enum firmware, and press Enter. Unlike the command used for the Windows Boot Manager, the “enum firmware” command lists all objects available in the BCD store, including any Linux installations.

Can I delete Bcdedit EXE?

Use the BCDEdit /deletevalue command to remove options that were added using the BCDEdit /set command. Before deleting BCDEdit options you might need to disable or suspend BitLocker and Secure Boot on the computer. To delete a boot option value that you have set, use the BCDEdit /deletevalue command.

How do I remove OS boot manager?

Follow these steps:

  1. Click Start.
  2. Type msconfig in the search box or open Run.
  3. Go to Boot.
  4. Select which Windows version you’d like to boot into directly.
  5. Press Set as Default.
  6. You can delete the earlier version by selecting it and then clicking Delete.
  7. Click Apply.
  8. Click OK.

How do I delete a boot entry?

Delete Windows 10 Boot Menu Entry with msconfig.exe

  1. Press Win + R on the keyboard and type msconfig into the Run box.
  2. In System Configuration, switch to the Boot tab.
  3. Select an entry you want to delete in the list.
  4. Click on the Delete button.
  5. Click Apply and OK.
  6. Now you can close the System Configuration app.

How do I change boot manager?

Press Win + R and type msconfig in the Run box. On the boot tab, select the desired entry in the list and click the button Set as default. Click the Apply and OK buttons and you are done.

How do I remove boot manager from BIOS?

From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Boot Options > Advanced UEFI Boot Maintenance > Delete Boot Option and press Enter. Select one or more options from the list. Press Enter after each selection. Select an option and press Enter.

How do I reset my BCDEdit?

  1. Restart the computer.
  2. Press the F8 key to open Advanced Boot Options.
  3. Select Repair your computer. Advanced Boot Options on Windows 7.
  4. Press Enter.
  5. At the System Recovery Options, click Command Prompt.
  6. Type: bcdedit.exe.
  7. Press Enter.

How do I delete BCDEdit options?

Use the BCDEdit /deletevalue command to remove options that were added using the BCDEdit /set command. Before deleting BCDEdit options you might need to disable or suspend BitLocker and Secure Boot on the computer.

What does the BCDEdit/deletevalue command do?

The BCDEdit /deletevalue command deletes or removes a boot entry option (and its value) from the Windows boot configuration data store (BCD).

What is the BCDEdit/set command?

The BCDEdit /set command sets a boot entry option value in the Windows boot configuration data store (BCD). Use the BCDEdit /set command to configure specific boot entry elements, such as kernel debugger settings, memory options, or options that enable test-signed kernel-mode code or load alternate hardware abstraction layer (HAL) and kernel files.

How do I use BCDEdit/store?

/store. This option can be used with most BCDedit commands to specify the store to be used. If this option is not specified, then BCDEdit operates on the system store. Running the bcdedit /store command by itself is equivalent to running the bcdedit /enum active command.