How do I set a default HP switch?
Solution:
- Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch. The power and fault lights come on.
- Continue to press the Clear button while releasing the Reset button.
- When the Self Test LED begins to blink, release the Clear button.
How do I reset my HP A5500 switch?
Re: How to Reset HP A5500 series Switch JD377A If so and you are at the or similar prompt, type reset saved-configuration. Then reboot the switch. But be careful. It will prompt you to save the current configuration or you will lose it.
How do I factory reset my HP 1920 switch?
To execute the factory default reset on the switch, perform these steps:
- Using a small, thin tool with blunt ends (such as a paper clip), press the Reset button on the front of the switch.
- Continue to press the Reset button until the Fault LED light begins to flash.
- Release the Reset button.
How do you reset a manageable switch?
The easiest way to reset the switch to its factory default settings is to look for its reset button located on the front panel, then press and hold for more than 10 seconds. You can also do it through the web interface of the switch.
How do I reset my HP 2920 48g?
To execute the factory default reset on the switch, perform these steps:
- Using pointed objects, simultaneously press both the Reset and Clearbuttons on the front of the switch.
- Continue to press the Clear button while releasing the Reset button. When the Test LED begins to blink, release the Clear button.
How do I reset my HP 1820 48G?
While the switch is on, I press and hold a paperclip on the reset button of this switch for 5-10 seconds. Then all the LEDs remain fixed and I release the button. After a couple of minutes, switch have the IP 192.168.
How do I reset my HP Deskjet 2620 to factory settings?
2620-24-PPoE+: factory default reset on the switch
- Using pointed objects, simultaneously press both the Reset and Clear. buttons on the front of the switch.
- Continue to press the Clear button while releasing the Reset button.
- When the Self Test LED begins to flash, release the Clear button.