How do I Telnet to APC?
On the login screen, use the default username and default password. After a successful login, you will be sent to the APC UPS Dashboard. Access the Configuration menu, access the Network menu, access the Console menu and select the Access option. Select the Telnet check box and click on the Apply button.
How do I access APC Smart UPS Web interface?
Connect to the UPS/device serial port using the correct APC configuration cable….9600 bps, 8 data bits, no parity, 1 stop bit, and no flow control.
- Apply the port settings to establish the connection.
- Press enter 3-5 times to display the username prompt.
- Use the default username and password of “apc”.
How do I Telnet to UPS?
To use Telnet to access the command line interface: 1. From a computer that has access to the network on which the NMC is installed, at a command prompt, type telnet and the IP address for the NMC (for example, telnet 139.225. 6.133, when the NMC uses the default Telnet port of 23), and press ENTER.
How do I reset my APC network card?
Solution: To reset the network interface of a SMT, SMTL, or SMX model UPS, on the display interface hold the UP and DOWN buttons simultaneously for 5 seconds. The display flashes to indicate that the network interface has restarted.
How do I reset my APC Network Management Card 2?
Tutorial APC UPS – Reset the Management interface Locate the APC network management interface on the back of your APC UPS. Press the reset button for 20 seconds. Wait for the network led change to the orange color. The APC UPS network management interface will reset its configuration back to the factory default.
How do I reset my APC Smart UPS 1500?
APC Smart UPS – How to reset / restart
- Turn off and unplug UPS from wall.
- Press and hold the OFF button again.
- You may see a quick flash of the LED’s and you should hear an audible “”click”” from the UPS.
- Turn UPS back on.
How do I restart my APC UPS management card?
Open your browser and enter the IP address of the APC UPS. On the login screen, use the default username and default password. After a successful login, you will be sent to the APC UPS Dashboard. Select the Reboot Management Interface and click on the Apply button.
What is the default password for APC UPS?
The default user name and password are both apc. A Device User has read and write access to device-related screens. Administrative functions like session management under the Security menu and Firewall under Logs are greyed out. The default user name is device, and the default password is apc.
How do I configure an APC network management card?
An APC Network Management Card must be configured with network settings before it can communicate on the network. Once the cards have been configured with an IP address, Subnet Mask, and Default Gateway the cards can be accessed, managed, and controlled from other computers on the network.
Who wrote the ap9635 network management card 2 user guide?
Network Management Card 2 User Guide Author APC by Schneider Electric Subject SCREEN – Network Management Card 2 User Guide Keywords AP9630, AP9631, AP9635 Network Management Card 2 Created Date
How to recover a lost password from a network management card 2?
UPS Network Management Card 2 User’s Guide5 How to Recover from a Lost Password You can use a local computer that connects to the NMC 2 through the serial port to access the command line interface. 1. Select a serial port at the local computer, and disable any service that uses that port.
What is the network management card 2 user’s Guide for UPS?
UPS Network Management Card 2 User’s Guide28 Duration of Shutdown Specify the length of time for which the UPS is powered off. Sync Control Shutdown Specify the shutdown options in response to commands from a Synchronized Control Group. See “Synchronized Control of your UPS devices” on page 35. Basic Shutdown Delay