How do I update AutoStar Meade?
When downloading is complete, double click on the saved file to start the installation. Follow the instructions provided to install Autostar Update (ASU) on your machine. When installation is complete, start ASU by selecting “Start Menu” -> “Programs” -> “Meade” – > “AutoStar Updater”.
How do you look through a telescope eyepiece?
Look through the eyepiece. Place your eye just behind it to take advantage of its eye relief. Do not place your eye directly against the eyepiece; getting too close will prevent you from blinking and also cause a black ring to appear around the field-of-view.
Why can’t I focus my telescope?
Many refractors rely on the star diagonal to bring the eyepiece into the focusing range of the telescope, so if you can’t get anything to focus, make sure you always have the diagonal in place between the eyepiece and the telescope. Again, use the lowest magnification.
Why can’t I see through my telescope?
If you are unable to find objects while using your telescope, you will need to make sure the finderscope is aligned with the telescope. The finderscope is the small scope attached near the rear of the telescope just above the eyepiece holder. This is best done when the scope is first set up.
What version of Autostar Updater does Meade envisage support?
AutoStar Updater 5.9 or greater can detect either version and load the appropriate firmware. Envisage Version 7.08x is Meade’s DSI camera control software. This latest version supports the DSI line of cameras on the following platforms:
How does the Meade Autostar work?
The open architecture of the Meade Autostar permits the update of operating software, the loading of events such as comets, satellites, and minor planets, and allows you to share or “clone” this information with other Autostars.
What software do I need for my Meade telescope?
Autostar Suite Software is your complete digital astronomy solution for your Meade telescope! For fixing the tour generating and object selection of custom catalogs. Envisage Version 7.05 is the DSI camera control and basic image processing software.
What is the warranty on a Meade telescope?
Every Meade telescope, spotting scope, and telescope accessory is warranted by Meade Instruments Corporation (“Meade”) to be free of defects in materials and workmanship for a period of ONE YEAR from the date of original purchase in the U.S.A. and Canada.