How do I use a Motorola handheld scanner?
Press and hold the Bluetooth button (round button) for five seconds. The scanner beeps and the Bluetooth button starts blinking quickly to indicate that the scanner is discoverable by the host. On your mobile device, turn on Bluetooth and let it search for devices. You will see your scanner in the list.
How do I reset my MC9190 to factory settings?
Hold down the Power button for approximately five seconds. As soon as the MC9190-G starts to perform a warm boot release the Power button. A cold boot restarts the MC9190-G and erases all user stored records and entries that are not saved in flash memory (Application and Platform folders) or a memory card.
How do I turn the volume down on my Motorola scanner?
The volume can be controlled by pressing the blue function key and then the H or M key. The display brightness can be controlled by pressing the blue function key and then the D or I key.
How do I turn the volume up on my scanner symbol?
Information
- Open EasySet and select the proper scanner model.
- Go to ‘Operating settings’ > ‘Beeps/LEDs’ > ‘Volume’.
- Select the desired volume and the barcode will appear on the configuration sheet.
- Read the configuration Barcode.
How do I reset my Motorola RF scanner?
A cold boot restarts the MT2090 scanner and erases all user stored records and entries from RAM. To perform a cold boot, press and hold the 2 key and the scan trigger simultaneously for 10 seconds. You should note that this is the same button combination as a warm boot held for 5 seconds longer.
How do I lower the volume on my scanner symbol?
How do I turn up the volume on my Motorola scanner?
How to adjust the Volume and Display Brightness on your Motorola MC9190. The volume can be controlled by pressing the blue function key and then the H or M key.
What is the documentation set for the mc9190-g?
Documentation Set The documentation set for the MC9190-G is divided into guides that provide information for specific user needs. • MC9190-G User Guide – describes how to use the MC9190-G mobile computer. NOTE By default, the Microsoft Bluetooth stack is enabled.
How do I Clean my mc9190-g?
Be careful not to let liquid pool around the display window or other places. MC9190-G User Guide Rub the cotton portion of the cotton tipped applicator back-and-forth across the connector on the bottom of the MC9190-G. Do not leave any cotton residue on the connector.
How do I enable VQM on the mc9190-g?
Introduction The Voice Quality Manager (VQM) is a software package that resides on the MC9190-G. VQM enables a set of features for Voice over WiFi (VoWiFi) calls. The VQM user interface is designed to be intuitive and easy to use, so… B – 2 MC9190-G User Guide Tap the filename to enable VQM.
How do I connect the mc9190-g to a Bluetooth device?
Select the Headset service name and select Connect. The MC9190-G connects to the headset. Refer to the headset user manual for instructions on communicating with a Bluetooth device. 4 – 24 MC9190-G User Guide Serial Port Services Use the wireless Bluetooth serial port connection as you would a physical serial cable connection.
