How do you charge a PosiTector?

Battery Type Selects the type of batteries used in the PosiTector body from a choice of “Alkaline”, “Lithium” or “NiMH” (Nickel-metal hydride rechargeable). If NiMH is selected, the PosiTector will trickle charge the batteries while connected via USB to a PC or optional AC charger.

How do you zero a PosiTector 6000?

To establish “0” on a rough or curved surface a preferred method to (i) is to take several readings on the uncoated part and average the result. (a) Select Zero from the Cal Settings menu. (b) Press (+) to select the number of readings to be used to obtain an average, typically 3 to 10 readings.

What does a PosiTector 6000 do?

The PosiTector 6000 FNDS probe measures the individual thicknesses of both the paint and the zinc layers in a duplex coating system with a single reading.

What is Defelsko PosiTector?

The rugged, fully electronic PosiTector 6000 Paint Thickness Gage uses magnetic and eddy current principles to measure paint thickness on both ferrous and non-ferrous metals, accurately and quickly. Ready to measure—no calibration adjustment required for most applications.

How can you tell the thickness of paint?

Two measurements must be taken: one with the coating in place and the other without. The difference between the two readings, the height variation, is taken to be the coating thickness. On rough surfaces, micrometers measure coating thickness above the highest peak.

Which is the thickness measurement technique?

Stylus-Method Profilometry. Most commonly and cost effective mechanical method used for the thickness measurement is the Stylus method Profilometry. Stylus Profilometry is one of the common tools to measure film thickness and surface characteristics of film.

What is the standard paint thickness?

Thickness usually ranges between 1.5–2.0 mils (35–50 microns). It is the final original equipment manufacturers coating applied to a vehicle to protect the (base) color coat from a hostile environment while providing both depth and a durable, glossy appearance.

What is positector 6000?

The PosiTector 6000 hand-held, electronic instrument non-destructively measures the thickness of coatings on metals, quickly and accurately. It consists of a body (Standard or Advanced) and probe (Built-in or Separate).

How do I access the menu on a positector 6000?

To access the Menu, power-up the Gage, then press the center navigation button. Below is a sample menu for a PosiTector 6000 Advanced Model: Some buttons have a tick box to their right to indicate current status. An empty box indicates that feature is not active. Current selection is displayed with darkened background

What is scan mode on the positector 6000 probe?

In ordinary operation, the PosiTector 6000 probe takes thickness readings every 2 seconds when placed onto a surface. Normally, the user raises the probe after it has taken a single reading and relocates it to a second location. Scan mode modifies this behavior in two ways. First, measurements are taken much faster.

How do I protect my positector 6000 from the weather?

Some PosiTector 6000models are shipped with a protective plastic cap over the probe. Remove this cap prior to use. Replace it when the Gage is not in use to protect the probe. Wrist Strap We recommend attaching and wearing the supplied wrist strap. 1 2 Plastic Lens Shield