How do you light a Rinnai Infinity 26?
The Rinnai 26 Touch does not have a pilot light as they have an electric ignition and a sensor switch. So when cold water passes through the hot water heater unit, the heater will automatically fire up and heat the water. The benefits of the Rinnai 26 Touch is you will never run out of hot water.
How does a Rinnai Infinity work?
The Rinnai INFINITY works by heating water as it passes through the unit. So you only use energy when you turn the tap on. This process makes the Rinnai INFINITY an extremely energy efficient system, as it only heats water when required. In turn, it reduces your running costs, as well as greenhouse gas emissions.
How do I make my Rinnai hot water hotter?
With A Temperature Controller If your Rinnai tankless heater has a temperature controller (up/down arrows to change the temperature), then there is a particular switch to flip. To adjust the max temp to 140F (rather than 120F), you will have to flip switch #6 in the dip switch SW1.
How do I adjust the temperature on my hot water heater Australia?
Every hot water system is a little different, some will have a thermostat you can adjust without having to break out a screwdriver. “If you open the access panel at the bottom, there’ll be a dial in front of you with numbers on it,” Mr Ttofari says. “The higher the number is on the dial, the higher the temperature.
How do I turn on my tankless water heater?
Turn the gas shut-off valve counterclockwise to the “On” position. Turn the electric breaker back on or turn on the power switch to start the unit.
How do you adjust the temperature on a Rinnai water heater?
The main first step is to remove the front panel to expose the ‘guts’ of your Rinnai tankless water heater….
- Step 1 – Turn Power On.
- Step 2 – Remove Front Panel.
- Step 3 – Press Priority Button.
- Step 4 – Flip Switch #6 in Dip Switch SW1.
- Step 5 – Verify Temperature Change.
Why is our hot water not working?
A water heater that produces no hot water may not be getting power, may have a tripped limit switch, or may have one or more failed heating elements. First, check the water heater’s circuit breaker in the service panel to make sure it hasn’t tripped. If the breaker has tripped, switch it off, then switch it back on.
How do you adjust the temperature on a Rinnai tankless water heater?
- Step 1 – Turn Power On. In order to adjust the default temperature on a Rinnai unit, the power has to be on.
- Step 2 – Remove Front Panel.
- Step 3 – Press Priority Button.
- Step 4 – Flip Switch #6 in Dip Switch SW1.
- Step 5 – Verify Temperature Change.
- Step 6 – Install Front Panel.
How do you adjust a Rinnai?
What temperature should my Rinnai water heater be set at?
For your safety, Rinnai tankless water heaters come with a maximum temperature default setting of 120℉ to help prevent scalding. However, by following these simple steps, you can increase the temperature to 140℉ if you choose.
How do I activate recirculation on my Rinnai tankless water heater?
If your Rinnai Tankless Water Heater has recirculation capability, you can activate recirculation though the use of the control•r™ Module. The module can be wirelessly paired with motion sensors or push buttons.
Where can I buy a Rinnai conversion kit?
These kits are available directly from Rinnai. They will be shipped only after the installer or service provider has contacted Rinnai’s technical support services and consulted one of our technical specialists, to ensure the installer or service provider is qualified to perform the conversion.
Do I need an upgrade for my Rinnai control•R™ device?
UPDATE REQUIRED for most customers with the Rinnai control•r™ app and module. Learn More. Select a region. Commercial-grade units with the industry’s best warranty.
How do I contact Rinnai for troubleshoot issues?
Please contact Rinnai or your local installer to troubleshoot the codes and find the root cause. Send us a message or call our Customer Care team at 1-800-621-9419. We are available Monday through Friday, 8 a.m. to 8 p.m. EST.