How do you reset the maintenance light on a Acura TSX?

How do you reset the maintenance light on a Acura TSX?

Reset oil service light Acura TSX

1. Press and hold the TRIP/RESET button and turn ignition to (II) do not start the engine.
2. Continue to hold the TRIP/RESET button for 10 seconds until light resets.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

How do you reset the maintenance light on a 2008 Acura?

From years: 2006, 2007, 2008, 2009, 2010. Turn the ignition to (II) do not start the engine. Press the SEL/RESET button on the steering wheel repeatedly until engine oil life is displayed. Press and hold the SEL/RESET button for more than 10 seconds.

How do I reset my Acura maintenance light?

Turn on the ignition. Go to MAINTENANCE INFO using the steering wheel buttons. Use the steering wheel buttons on the right to display the oil life. Once the remaining oil life is shown, use the steering wheel buttons to select RESET.

How do you reset an Acura TSX 2004?

2004-2005

1. Turn the ignition switch to the OFF (0) position.
2. Press and hold the Select/Reset button(s) in the instrument panel, then turn the ignition switch to ON (II) position.
3. Hold the button(s) for 10 seconds or until the indicator resets.

What does service due soon B mean?

What it means: A. Replace just the engine oil. B. Replace the engine oil, oil filter, rotate the tires, inspect the front and rear brakes, check the parking brake adjustment, and inspect other items specific to your vehicle.

What does service due soon A1 mean?

When an Acura A1 service code appears on your dashboard, you’re due for an oil change and a tire rotation.

How do you reset the oil change service maintenance indicator?

Maintenance – Oil Change Indicator Reset

1. Switch the ignition on.
2. Fully press the accelerator and brake pedals at the same time.
3. Keep the accelerator and brake pedals fully pressed.
4. After three seconds, a message displays confirming the reset procedure is in progress.