How do you start pool pump for the first time?

Steps to Prime Your Pool Pump

1. Turn off the pump.
2. Switch to recirculate.
3. Release air.
4. Clean out the pump basket.
5. Fill the pump basket.
6. Once the pump basket is filled and tightened, make sure the air release valve is open and turn the power to the pump on.
7. Check the water flow to your pump.

What setting should my pool pump be on?

The “Filter” setting circulates water through the sand or DE media, then out the filter through the return port to the pool. This is the standard setting for normal pump and filter operation. The “Backwash” setting redirects the flow of water backwards through the filter media to flush out contaminants.

How long should I run my pool pump for the first time?

The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool’s size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool’s turnover rate is.

How do you hook up a pool pump?

How to Connect a Filter & Pump for a Swimming Pool

1. Place the pump and filter assembly on level ground next to the electric source.
2. Connect the pump to the filter housing.
3. Attach the hose from the filter’s out spout to the pool’s return port.
4. Connect the hose from the skimmer to the filter’s pump basket.

How do I start my pool pump and filter?

How to Prime a Pool Pump

1. Turn the Multiport Valve to Recirculate. This will direct the water into the filter head, and then right back out to the pool.
2. Remove Pool Plugs.
3. Fill The Pump With Water.
4. Turn the Pump On.

How do I bleed the air out of my pool pump?

How to Bleed Air from Diatomaceous Earth (DE) or Cartridge Filter

1. Turn on the pool pump.
2. Check the pressure gauge and note the pressure.
3. Locate and turn the air bleeder valve(s).
4. Wait till water gushes out of the air bleed valve (this takes a few seconds).
5. Damaged bleeder valve(s) should be replaced.

How do you set up a pool pump and filter?

1. Choose the Type of Pool Filter.
2. Pick a Location for the Pool Filter.
3. Turn Off the Pool Pump.
4. Assemble the Pool Filter.
5. Prepare the Piping Connections.
6. Connect the Pool Filter to the Pool Water Lines.
7. Record the Initial Internal Pressure.
8. Tips for Installing a Sand Pool Filter.

How do you set up a pool filter?

Choose the Type of Pool Filter

1. Choose the Type of Pool Filter.
2. Pick a Location for the Pool Filter.
3. Turn Off the Pool Pump.
4. Assemble the Pool Filter.
5. Prepare the Piping Connections.
6. Connect the Pool Filter to the Pool Water Lines.
7. Record the Initial Internal Pressure.
8. Tips for Installing a Sand Pool Filter.