How do you use a Proselect thermostat?

How do you use a Proselect thermostat?

Press the or button to change the set point temperature to the desired setting in 1˚ F increments (0.5˚ C). Press the PROG button to save. The thermostat will now display the DAY set point time and temperature. Again, you will see the hour portion of the set point time and the AM/PM indicator will be flashing.

How do you adjust a Proselect thermostat?

Press and hold or button for 1 second or longer. The entire display will flash once and the SET indicator will be displayed. Release the or button and press the or button again as desired to adjust the set temperature.

How do you use hold and run thermostat buttons?

By pressing “Hold”, your thermostat will lock in the temperature it’s currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming. Convenient, right?

How do you control a Braeburn thermostat?

The general steps to programming your thermostat are below.

  1. Press the “Prog” button.
  2. In order to select “Cool” or “Heat”, press the “System” button until it lands on the desired setting.
  3. Use the arrow buttons to adjust the time and temperature you need for each time slot.
  4. Click “Return” when you’re done.

How do you turn the heat up on a Braeburn thermostat?

Press the ‘prog’ button on your thermostat. Press the system button until it lands on the cool or heat setting. You can also move the switch to one of these on your thermostat if you have one.

What can you do if your thermostat is not working?

Learn what they are and what to do here.

  1. Check the Power to the Thermostat.
  2. Check the Age of the Thermostat.
  3. Check the Mode of the Thermostat.
  4. Check the Temperature Setting.
  5. Check the Calibration.
  6. Call a Professional.
  7. Thermostat Not Working Services.

Does Proselect thermostat have batteries?

This thermostat is a dual power thermostat and either requires 24 Volts AC Power or two (2) properly installed “AA” alkaline batteries for normal operation and control of the heating or cooling system. Refer to “Low Battery Detection and Replacement” section for more information.

How do I setup my Braeburn thermostat?

Braeburn Thermostat Instructions

  1. Press the “Date/Time” button on the keypad to set the day and time of your thermostat.
  2. Press the “Fan” button repeatedly to scroll through the different fan settings.
  3. Press and hold the “Return” button for four seconds.
  4. Press the “Prog” button to enter program setting mode.

How do I set up my proselect thermostat?

How do I set a Proselect thermostat? 1 Shut Down Your AC at the Thermostat. The first step in resetting your AC thermostat is to turn it off at the AC unit. 2 Find Your Circuit Breaker Box. 3 Reset the Circuit Breaker for Your AC Unit. 4 Wait 30 Seconds. 5 Turn the AC Thermostat Back On.

How do I change the set point temperature on my thermostat?

Press the or button to change the set point temperature to the desired setting in 1˚ F increments (0.5˚ C). Press the PROG button to save. The thermostat will now display the DAY set point time and temperature.

How do you turn the thermostat up or down for heat?

Press and hold the or button. Likewise, people ask, do you turn the thermostat up or down for heat? Don’t crank your thermostat up or down to heat or cool your home faster—it does not work. Change your thermostat temperature setting when you’re away from home for 8+ hours.