How much do plastic bollards cost?
In this case, the bollard installation cost to the client is about $800 to $1275 per bollard as specified. Lower quantities will be higher per bollard while for higher quantities, you will see a price break.
What can I use instead of bollards?
Generally, guide posts are designed to be lightweight and relatively malleable, making them a flexible alternative to steel bollards and barriers. This makes them appropriate for places where you do not need to provide heavy duty stopping power, but rather a mild deterrent.
Do bollards stop cars?
Unlike other types of barriers, such as fences or large concrete blocks, security bollards can restrict vehicle access while allowing clear pedestrian flow.
How much is a pipe bollard?
Compare Similar Safety & Traffic Control
|48 in. X 5.5 in. Yellow Pour In Place Safety Bollard||48 in. X 4.5 in. Surface Mounted Steel Pipe Safety Bollard||52.75 in. x 5.5 in. Removable Steel Pipe Safety Bollard|
How much are removable bollards?
$175 to $250
Removable bollards are known for their flexibility. They are most commonly used for access controls. Their price ranges from $175 to $250.
How deep should a bollard be buried?
18 to 24 inches deep
How deep should a bollard be buried? The hole dug for the bollard should have a 6 inch gap all around, be 18 to 24 inches deep and set in concrete.
How deep should bollards be?
How far should a bollard be from a building?
between 3 and 5 feet
The distance between bollards should be between 3 and 5 feet, enough to allow for pedestrian traffic and wheelchair access, but close enough to deter the entrance of a vehicle.
How high should bollards be?
Design. a. Bollards shall be set with the top of the device not less than three feet and not greater than four feet in height as measured from finished grade immediately adjacent to the perimeter of the bollard. b.
How much does bollard concrete cost?
For 6-inch-diameter steel pipe, I recommend that the bollard foundation be 3 feet deep and at least 18 inches square. That works out to a bit less than 7 cubic feet of concrete (about ¼ yard) — not really that much, but still a fair amount to mix by hand.
What kind of bollards do you use for parking?
Parking Bollards and Bollard Covers. Parking bollards, pedestrian bollards and security bollards offered by The Park Catalog are an effective way to control vehicular or pedestrian traffic and prevent accidents. Our parking bollards come in sturdy steel, concrete or plastic, lighted, removable and even with signs attached.
What is the size of a bollard?
24″, 36″ or 48″ H x 4”x4” x 1/4” thick upright welded to a 3/8” x 8” x 8” base plate, drilled for four 5/8” anchors. Bollards can be used both indoors and outdoors to protect work areas, racking and personnel. Surface mounted steel base plate allows for quick and easy bollard removal. Steel base plate is bolted in place.
What is a primed bollard?
Primed steel bollards are prepared with the application of a primer or undercoat (done before painting). The priming enhances coating adhesion to the steel surface. If the steel is not primed before painting or other coating is applised it typically oxidizes and rust forms.
What is a stainless steel bollard made of?
Stainless steel bollards are manufactured from Type 304 stainless steel or Type 316 for harsher environments, and the stainless steel is polished to a #4 finish for long-lasting durability. I have worked with 1-800-Bollards for the last few years and have enjoyed great customer service.