Is IH 392 a good engine?
This International Harvester 392 With Zoomies Sounds Awesome In A Boat! The International Harvester 392 V8 is one of the most overbuilt, heavy-duty, run forever and not make a lot of horsepower kind of engines ever made.
Is the International 392 a big block?
The 345 weighs about 760, and the 392 about 780. By “car” standards (small block vs big block) they are all big blocks.
How much horsepower does a 345 International have?
|Engine manufacturer:||International V 345|
|Horsepower net:||107.5 kW / 146 PS / 144 hp (SAE net)|
|Torque net:||386 Nm / 285 ft-lb|
Is the International 345 engine good?
Is The International 345 Engine Good? It is an extreme mid-sized gasoline engine built very tough. Even though they are not the fastest, as someone else posted, they will run all day long and every day. Although they were thirsty, they also competed against each other.
How much does a International 392 engine weigh?
How Much Does A 392 Hemi Engine Weight?
|Cargo capacity, all seats in place||16.2 cu.ft.|
|Curb weight||4,232 lbs.|
|EPA interior volume||110.1 cu.ft.|
|Gross weight||5,300 lbs.|
What size motor is a 6.4 Hemi?
392 cubic inches
A 6.4-liter engine is equivalent to 392 cubic inches because both measurements are different units of expressing engine displacement.
How much does a International 345 weigh?
How Much Does Ih 345 Engine Weigh?
|Engine Type||304 / 304A||345|
|Horsepower max.||[email protected]||[email protected]|
|Torque max.||[email protected]||[email protected]|
|Weight bare||617.6 Lbs.||640.6 Lbs.|
|Weight w/std. Access.||698 Lbs.||727 Lbs.|
How do you tell a 304 from a 345?
Measure across your valley pan, from bolt to bolt. The 345 is wider than the 304, so if yours is a 345 the unknown engine should be the same measurement. If it’s less, it’s a 304 or 266, if it’s the same it could be a 345 or 392.
Who made the International 345 engine?
These trucks are among the most reliable ever built by International Harvester, especially those fitted with the brand’s 345-cubic-inch (5.7-liter) V8 engine. Part of the company’s V304/345/392 series of gasoline mills, the 345 was originally optional on the 1600 and 1700 and standard on the 1800.
What is the horsepower of the IH 392 engine?
The 392’s were rated at 253hp. PLEASE IWOULD APPRECIATE IT IF YOU COULD PROVIDE THE CONTACT ADDRESS FOR A PARTS SUPPLIER FOR THE IH 392 ENGINE. I’M IN A REMOTE REGION HERE IN LAOS AND NEED TO GET OUR FIRE TRUCK BACK INTO SERVICE ASAP [.
Are there any problems with the 392?
Other than what is below there are no problems with the 392. Sounds like it may have blown a head gasket of been over heated. The 392 came from the factory with a composite head gasket. Its also and old engine went out of factory production about 1982 Until the 392 came along the tandem loadstars all had 345s. Dad had one in the 60s with a 345.
What is the difference between a Ford 392 and Ford 392?
The 392 makes up for its bigger size in the cylinder bore diameter. The heads are also interchangeable, with the port size being nearly the same. However, the 392 has larger, sodium-filled valves. Exhausts are 1.734 versus 1.609, with intakes of 2.078 versus 1.979.
Where does the coolant go in a 392?
The early 392 had a problem with hot spots on one or 2 cylinders and about 1973 they changed the block and head and this referred to as the Improved Cooling 392. The coolant tubes run from the water pump to the block. In all the other engines 266-304-345-392 (non-IC) they run to the heads.