Should sends be pre fader?
Well in terms of mixing it is often advantageous to use a pre fader send. This is because the signal itself will essentially be independent of the channel fader, meaning you are free to raise or lower the fader without influencing the level that is being sent to the auxiliary track.
What sends typically Should I send pre fader?
Pre-fader sends are more typically used for Headphones sends, or a special effect. If you have a vocal sending to a reverb pre fader, every time you adjust the vocal’s volume you are changing the relationship between the vox and verb.
Are Ableton sends pre or post fader?
Sends & Returns In this screenshot there are three groups: the ‘A’ sends are pre-fader, while the ‘B’ and ‘C’ sends are post-fader. Note that you can send a Return track back to itself if you want to create feedback.
What does pre fader and post fader mean?
Pre-fader sends. The audio channel signal is sent to the FX channel before the audio channel volume fader. Post-fader sends. The audio channel signal is sent to the FX channel after the audio channel volume fader.
Should monitors be pre or post fader?
A: Pre-fader sends are normally used for monitors, cue mixes, or headphone mixes. This is so that moves made with the faders (which affect front of house or the in-studio mix) do not affect the monitor mix, which needs to be independent. Post-fader sends are almost always used for effects.
What is pre fader vs post fader?
What is a pre fader send?
A pre-fader Aux Send taps the incoming signal from the channel at a point that is before the channel fader. So, when the channel fader is down, the signal is still being sent to the aux bus.
What does send on fader mean?
Sends on faders allows you to quickly access all sends to a certain mix. When enabled all faders will show the level send to the selected bus instead of the LR mix. It is also possible to show the channel gains on the faders.
What is pre fader level?
In pre fader mode, your meters show the signal level after the inserts. It is not affected by the fader level. Therefore, the fader could be at negative infinity dBFS but the channel will still show the signal after the last insert. In post fader metering, you meter is affected by your fader level as well.
What does the fader do?
A fader is any device used for fading, especially when it is a knob or button that slides along a track or slot. It is principally a variable resistance or potentiometer also called a ‘pot’. A contact can move from one end to another.
What is pre fader or post fader?